journal article·2010-11

Low-cycle fatigue behavior of SiCp/Al–Si composites produced by spray deposition

W. Li, Z.H. Chen, D. Chen, J. Teng, C. Fan

Materials Science and Engineering: A· Volume 527· Issue 29-30
Publisher page

Abstract

Abstract In this research, the low-cycle fatigue life and cyclic stress response of SiCp/Al–Si composites produced by spray deposition were investigated in comparison to the unreinforced alloy. Both the composite and matrix alloy display cyclic hardening under total-strain amplitude 0.35–0.5%. However, under low strain amplitude (0.3%), the Al–Si alloy shows cyclic stable after the initial hardening for 200 cycles. In contrast, the composite displays cyclic hardening immediately at the beginning of cyclic loading and a secondary hardening is also observed prior to fatigue fracture. Due to the higher density of pre-existing dislocations, interaction of mobile dislocations with the reinforcing SiC particles and more dislocation–dislocation interactions, a more pronounced strain-hardening behavior was observed for the composite. Moreover, both composite and matrix alloy follow the Coffin–Manson relationship. Fatigue damage parameter indicates the inferior life in the low-cycle regime for the composite, compared to the unreinforced alloy. Fractographic analysis shows that particle/matrix debonding is the main mechanism of failure in the SiCp reinforced composite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Rohatgi · JOM · 1991 · 43 · 1010.1007/BF03220538 ↗
2. Nakanishi · JSAE Rev. · 2002 · 23 · 36510.1016/S0389-4304(02)00203-5 ↗
3. Sahin · Mater. Des. · 2003 · 24 · 67110.1016/S0261-3069(03)00156-0 ↗
4. Wang · J. Mater. Proc. Technol. · 2003 · 137 · 19110.1016/S0924-0136(02)01074-9 ↗
5. Lavernia · Key Eng. Mater. · 1991 · 53–55 · 15310.4028/www.scientific.net/KEM.53-55.153 ↗
6. Bonnen · Metall. Mater. Trans. · 1991 · 22A · 100710.1007/BF02661094 ↗
7. Llorca · Metall. Mater. Trans. · 1992 · 23A · 91910.1007/BF02675568 ↗
8. Hadianfard · J. Mater. Sci. · 2000 · 35 · 171510.1023/A:1004720300774 ↗
9. Hung · Compos. Eng. · 1995 · 5 · 50910.1016/0961-9526(95)00022-F ↗
10. Srivatsan · Int. J. Fatigue · 1992 · 14 · 17310.1016/0142-1123(92)90371-I ↗
11. Koh · Int. J. Fatigue · 1999 · 21 · 101910.1016/S0142-1123(99)00099-7 ↗
12. Han · Mater. Lett. · 1999 · 38 · 7010.1016/S0167-577X(98)00134-7 ↗
13. Chen · J. Mater. Sci. · 1997 · 32 · 415310.1023/A:1018670328085 ↗
14. Chen · 2003
15. Han · Scripta Metall. Mater. · 1995 · 33 · 78110.1016/0956-716X(95)00281-Y ↗
16. Hong · Mater. Sci. Eng. · 2003 · A347 · 19810.1016/S0921-5093(02)00593-2 ↗
17. Han · Compos. Sci. Technol. · 1999 · 59 · 14710.1016/S0266-3538(97)00118-8 ↗
18. Arsenault · Acta Metall. Mater. · 1991 · 39 · 4710.1016/0956-7151(91)90327-W ↗
19. Sun · Acta Metall. Mater. · 1992 · 40 · 296110.1016/0956-7151(92)90460-V ↗
20. Rohatgi · Composites A · 2007 · 38 · 182910.1016/j.compositesa.2007.04.005 ↗
21. Srivatsan · Compos. Sci. Technol. · 1993 · 49 · 30310.1016/0266-3538(93)90061-K ↗