journal article·2003-03

Solidification behavior of Ti5Si3 whiskers in TiAl alloys

Fu-Sheng Sun, F.H (Sam) Froes

Materials Science and Engineering: A· Volume 345· Issue 1-2
Publisher page

Abstract

Abstract The solidification behavior of Ti 52 Al 48 – x Si ( x =0, 0.5, 1.0, 2.0, 3.0, 6.0 at.%), Ti 52 Al 48 –3Si2M (M=Cr, V) and Ti 52 Al 48 –3Si2Cr2V at.% alloys has been studied using differential thermal analysis (DTA) and microstructure examination. The Ti 5 Si 3 phase was formed during solidification of the Si containing TiAl alloys. Two types of Ti 5 Si 3 phase were found in Ti 52 Al 48 – x Si ( x =0.5, 1.0, 2.0 at.%). The first one was formed during the L→Ti 5 Si 3 +L 1 transformation as large isolated Ti 5 Si 3 whiskers formed before primary solidification, and the second one was characterized by whiskers in a eutectic morphology resulting from the solidification of L 2 →α+Ti 5 Si 3 after the primary solidification of L 1 →β+L 2 . In contrast, the primary solidification in the Ti 52 Al 48 –3Si alloy was L 1 →α+L 2 , and a third type of Ti 5 Si 3 phase was formed by a eutectoid reaction of α→γ+Ti 5 Si 3 . The effect of Cr and V on the solidification behavior and constituents of the Ti 5 Si 3 phase were studied with distributed coefficient of Cr, V, and Si. The uniform distribution of fine Ti 5 Si 3 whiskers in the Ti 52 Al 48 –3Si2Cr2V alloy gives effective reinforcement of the matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Kim · J. Organomet. Chem. · 1989 · 41 · 24
2. Kim · Acta Metall. Mater. · 1992 · 40 · 112110.1016/0956-7151(92)90411-7 ↗
3. Dimiduk · 1995 · 3
4. Yamaguchi · 1993 · 299
5. Lipsitt · Metall. Trans. · 1975 · 6A · 199110.1007/BF03161822 ↗
6. Kawabata · Metall. Trans. · 1993 · 24A · 14110.1007/BF02669611 ↗
7. S.C. Huang, D.W. McKee, D.S. Shih, J.C. Chesnutt, The Japan Institute of Metals Symp. Proc.-6, Japan Institute of Metals Tokyo, 1 (1991) 363.
8. Hahn · Metall. Trans. · 1995 · 26A · 11310.1007/BF02669798 ↗
9. Vujic · Metall. Trans. · 1988 · 19A · 244510.1007/BF02645472 ↗
10. Hahn · Scr. Metall. · 1990 · 24 · 13910.1016/0956-716X(90)90581-Z ↗
11. Singh · Scr. Metall. · 1991 · 25 · 48510.1016/0956-716X(91)90215-M ↗
12. Sujimoto · Mater. Res. Soc. Symp. Proc. · 1989 · 133 · 39110.1557/PROC-133-391 ↗
13. Hanamura · J. Mater. Sci. Lett. · 1989 · 8 · 2410.1007/BF00720241 ↗
14. Ren · Scr. Metall. · 1991 · 25 · 24910.1016/0956-716X(91)90389-I ↗
15. Li · Acta Metall. Mater. · 1994 · 42 · 291310.1016/0956-7151(94)90388-3 ↗
16. Das · Metall. Trans. · 1996 · 27A · 162310.1007/BF02649820 ↗
17. Kad · Mater. Res. Soc. Proc. · 1989 · 133 · 23710.1557/PROC-133-237 ↗
18. Wang · Metall. Trans. · 1995 · 26A · 69110.1007/BF02663918 ↗
19. S. Mitao, S. Tsuyama, Proceedings of the Second Japan International SAMPE Symposium, 1991, p. 410.
20. Wunderlich · Z. Metallkd. · 1990 · 12 · 802
21. Zhang · Scr. Metall. Mater. · 1995 · 32 · 168310.1016/0956-716X(95)00255-T ↗
22. Johnson · Acta Metall. Mater. · 1996 · 44 · 252310.1016/1359-6454(95)00338-X ↗
23. McCullough · Acta Metall. Mater. · 1989 · 37 · 132110.1016/0001-6160(89)90162-4 ↗
24. M.C. Flemings, Solidification Processing, McGraw-Hill Book Co, New York, NY.