journal article·2010-03

Investigation on the ballistic performance of a dual phase steel against 7.62mm AP projectile

Mustafa Übeyli, Teyfik Demir, Hüseyin Deniz, R. Orhan Yıldırım, Ömer Keleş

Materials Science and Engineering: A· Volume 527· Issue 7-8
Publisher page

Abstract

Dual phase steels have the potential to reduce the weight of structural components because of the improved mechanical properties obtained from the two phases: soft ferrite and hard martensite. In this study, the ballistic performance of a low carbon and low alloy steel was investigated in intercritically annealed conditions. To do this, intercritical heat treatments at three different temperatures were applied to the steel samples separately to get three groups of samples having various martensite volume fractions. The full annealing treatment was also performed on a fourth steel group sample for comparison with the dual phase samples. The ballistic testing was carried out using a 7.62 mm armor piercing (AP) projectile. The experimental results pointed out that the ballistic resistance of the dual phase steel increased by increasing martensite content. In addition, deformed shear bands and/or highly distorted microstructures were observed in all samples irrespective of heat treatment after the ballistic testing. Furthermore, there was a remarkable increase in the micro and macro hardness of the investigated steel samples due to the ballistic induced strain. (C) 2009 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Ion-surface interactions and analysis · High-pressure geophysics and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Davies · Met. Trans. · 1978 · 9A · 45110.1007/BF02646397 ↗
2. Davies · Met. Trans. · 1978 · 9A · 4110.1007/BF02647169 ↗
3. Koo · Mater. Sci. Eng. · 1976 · 24 · 18710.1016/0025-5416(76)90112-9 ↗
4. Sudo · Trans. ISIJ · 1981 · 21 · 82010.2355/isijinternational1966.21.820 ↗
5. Hüper · ISIJ Int. · 1999 · 39 · 28810.2355/isijinternational.39.288 ↗
6. Bhadeshia · Met. Sci. · 1980 · 14 · 4110.1016/0036-9748(80)90296-3 ↗
7. Balliger · Met. Sci. · 1981 · 15 · 9510.1016/0036-9748(81)90144-7 ↗
8. Matsumura · Trans. ISIJ · 1984 · 24 · 64810.2355/isijinternational1966.24.648 ↗
9. Tavares · Scr. Mater. · 1999 · 40 · 88710.1016/S1359-6462(99)00042-1 ↗
10. Sun · Mater. Sci. Eng. A · 2002 · 335 · 29810.1016/S0921-5093(01)01942-6 ↗
11. Lis · J. Mater. Process. Technol. · 2005 · 162–163 · 35010.1016/j.jmatprotec.2005.02.105 ↗
12. Liang · Mater. Lett. · 2008 · 62 · 32710.1016/j.matlet.2007.05.034 ↗
13. Erdoğan · Mater. Charact. · 2003 · 49 · 44510.1016/S1044-5803(03)00070-6 ↗
14. Chao · Mater. Des. · 2007 · 28 · 55110.1016/j.matdes.2005.08.009 ↗
15. Sarwar · Mater. Des. · 2007 · 28 · 192810.1016/j.matdes.2006.05.010 ↗
16. Topçu · Mater. Des. · 2009 · 30 · 327410.1016/j.matdes.2009.01.017 ↗
17. Odeshi · Mater. Sci. Eng. A · 2008 · 488 · 23510.1016/j.msea.2007.11.021 ↗
18. Oliver · Mater. Sci. Technol. · 2007 · 23 · 42310.1179/174328407X168937 ↗
19. Manganello · J. Mater. · 1972 · 7 · 231
20. Woodward · J. Aust. Inst. Metals · 1977 · 22 · 167
21. Ogorkiewicz · Int. Defense Rev. · 1991 · 4 · 349
22. Gupta · Int. J. Impact Eng. · 1991 · 12 · 33310.1016/0734-743X(92)90101-X ↗
23. Dikshit · Int. J. Impact Eng. · 1995 · 16 · 29310.1016/0734-743X(94)00041-T ↗
24. Gupta · Int. J. Impact Eng. · 1997 · 19 · 39510.1016/S0734-743X(97)00001-8 ↗
25. Anderson · Int. J. Impact Eng. · 1999 · 22 · 61910.1016/S0734-743X(98)00069-4 ↗
26. Dey · Int. J. Impact Eng. · 2004 · 30 · 100510.1016/j.ijimpeng.2004.06.004 ↗
27. Dey · Int. J. Solids Struct. · 2007 · 44 · 670110.1016/j.ijsolstr.2007.03.005 ↗
28. Borvik · Int. J. Impact Eng. · 1999 · 22 · 85510.1016/S0734-743X(99)00011-1 ↗
29. Maweja · Mater. Sci. Eng. A · 2006 · 432 · 15810.1016/j.msea.2006.06.033 ↗
30. Hu · J. Chin. Inst. Eng. · 2002 · 25 · 9910.1080/02533839.2002.9670684 ↗
31. Übeyli · Mater. Des. · 2007 · 28 · 125710.1016/j.matdes.2005.12.005 ↗
32. Demir · J. Mater. Eng. Perform. · 2009 · 18 · 14510.1007/s11665-008-9288-3 ↗
33. ASTM E 92-82 (2003).10.2169/naika.92.Suppl_82 ↗
34. O. Topçu, M. Übeyli, T. Demir, Instrum. Sci. Technol. (2009), accepted.
35. Backman · Int. J. Eng. Sci. · 1978 · 16 · 110.1016/0020-7225(78)90002-2 ↗
36. Dormeval · 1987 · 47
37. Wingrove · J. Aust. Inst. Metals · 1973 · 18 · 167
38. Cho · Metall. Trans. A · 1990 · 21A · 116110.1007/BF02698247 ↗
39. Duan · Fatigue Fract. Eng. Mater. Struct. · 2003 · 26 · 111910.1046/j.1460-2695.2003.00705.x ↗
40. Hu · J. Chin. Inst. Eng. · 2002 · 25 · 9910.1080/02533839.2002.9670684 ↗