Fabrication of dense B4C/CNF composites having extraordinary high strength and toughness at elevated temperatures
Source abstract
Abstract
Abstract Fully dense B4C/CNF composites have been fabricated from the mixture of amorphous fine powders of boron and carbon, and carbon nano-fiber (CNF) using pulsed electric-current pressure sintering (PECPS) at 2173 K (1900 °C) for 10 min under 30 MPa in a vacuum. They showed a moderate mechanical properties at room temperature: bending strength σb more than 450 MPa, Vickers hardness Hv of 29–36 GPa, and fracture toughness KIC ranging from 4.1 to 5.7 MPa m1/2. However, they revealed extraordinary high strength more than 600 MPa at 1673–1873 K (1400–1600 °C) in an inert gas atmosphere, especially, σb of 830 MPa at 1773 K (1500 °C) (12.5 vol% CNF added composite) and σb of 800 MPa at 1873 K (1600 °C) (10.0 vol% CNF added composite). In addition, these B4C/CNF composites also showed much improved high-temperature fracture toughness by a factor of around 20, in comparison with monolithic B4C ceramics at 1773 K (1500 °C). These extraordinary both high strength and toughness might be explained in terms of the suppression of grain growth by CNF at elevated temperatures, an inverse strength temperature-dependence for carbides, and anchor effect induced by CNF.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Hammel · Carbon · 2004 · 42 · 115310.1016/j.carbon.2003.12.043 ↗
2. An · Wear · 2003 · 255 · 67710.1016/S0043-1648(03)00216-3 ↗
3. Siegel · Scr. Mater. · 2001 · 44 · 206110.1016/S1359-6462(01)00892-2 ↗
4. Endo · Carbon · 2001 · 39 · 128710.1016/S0008-6223(00)00295-5 ↗
5. CNF Catalogue from Supplier (Showa Denko K.K.). 〈http://www.sdk.co.jp/contents/product/index.htm〉.
6. Jiang · J. Colloids Interface Sci. · 2003 · 260 · 8910.1016/S0021-9797(02)00176-5 ↗
7. Sun · Carbon · 2003 · 41 · 106310.1016/S0008-6223(02)00441-4 ↗
8. Laurent · J. Eur. Ceram. Soc. · 1998 · 18 · 200510.1016/S0955-2219(98)00142-3 ↗
9. Tokita · J. Soc. Powder Technol. Jpn. · 1993 · 30 · 79010.4164/sptj.30.11_790 ↗
10. Hirota · J. Mater. Sci. · 2007 · 42 · 479210.1007/s10853-006-0830-0 ↗
11. Hirota · Mater. Sci. Eng. A · 2007 · 458 · 21610.1016/j.msea.2006.12.065 ↗
12. K. Hirota, T. Shibata, M. Kato, T. Nishimura, Proceedings of the Material Science and Technology (MS&T), 2007, pp. 309–320.
13. Hirota · Int. J. Appl. Ceram. Technol. · 2009 · 6 · 60710.1111/j.1744-7402.2008.02323.x ↗
14. Wang · Key Eng. Mater. · 2010 · 434–435 · 2410.4028/www.scientific.net/KEM.434-435.24 ↗
15. Merzhanov · Dokl. Acad. Nauk. SSSR · 1972 · 204 · 429
16. Munir · Am. Ceram. Soc. Bull. · 1988 · 67 · 342
17. Subrahmanyam · J. Mater. Sci. · 1992 · 27 · 624910.1007/BF00576271 ↗
18. Hirota · Mater. Sci. Eng. A · 2005 · 399 · 15410.1016/j.msea.2005.02.062 ↗
19. 1981 · 1267
20. Information from the Supplier (Mitsubishi Chemical Co. Ltd., Tokyo, Japan). 〈http://www.mkagaku.co.jp/about/mcc/division/carbon/carbon_b/index.htm〉.
21. Niihara · J. Mater. Sci. Lett. · 1982 · 1 · 1310.1007/BF00724706 ↗
22. McHale · 1994 · vol. X
23. Hayun · J. Eur. Ceram. Soc. · 2009 · 29 · 339510.1016/j.jeurceramsoc.2009.07.007 ↗
24. Kim · J. Am. Ceram. Soc. · 2000 · 83 · 286310.1111/j.1151-2916.2000.tb01647.x ↗
25. Carter · J. Am. Ceram. Soc. · 1987 · 70 · C7910.1111/j.1151-2916.1987.tb04992.x ↗
26. Katsuda · J. Eur. Ceram. Soc. · 2006 · 26 · 339910.1016/j.jeurceramsoc.2005.10.014 ↗
27. Hirota · Sci. Eng. Rev. Doshisha Univ. · 2007 · 47 · 54