journal article·2002-06

Mechanical properties of L12 modified titanium trialuminides alloyed with chromium, iron and vanadium

Tohru Takahashi, Koji Tominaga, Yasuhiko Tsuchida, Shinji Motizuki, Fumiaki Kawai, Tadashi Hasegawa

Publisher page

Abstract

Abstract L1 2 modified titanium trialuminides have been prepared by replacing 9 mol% of aluminum in Al 3 Ti with ternary and quaternary alloying elements of chromium, iron and vanadium. All the materials were recrystallized into single-phase polycrystals with average grain diameters of about 40 μm. Lattice parameters of the 9 at.% chromium- and 9 at.% iron-modified materials were 0.3959 and 0.3939 nm, respectively. Lattice parameters linearly increased with vanadium addition as the fourth element. Compression tests were performed at temperatures ranging from an ambient temperature up to 1300 K. Yield strength was not sensitive to chemical composition among chromium- and iron-modified materials, but it increased with vanadium addition. Strengthening effect of vanadium was retained up to high temperatures. Compressive creep rates at around 1200 K showed the same effect of vanadium. Flow stress fluctuation of about a few percent was observed in an intermediate temperature range. At 500 K, the flow stress began to fluctuate after several percents of plastic deformation, and it continued through the test. At around 600 K, serrations started immediately after yielding and continued to the end. At 800 K, flow stress fluctuations occurred just after yielding.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Yamaguchi · Prog. Mater. Sci. · 1990 · 34 · 110.1016/0079-6425(90)90002-Q ↗
2. Yamaguchi · 1987 · 81 · 275
3. Yamaguchi · 1990 · 63
4. Umakoshi · Phil. Mag. · 1988 · A58 · 65110.1080/01418618808209943 ↗
5. Takahashi · 1997 · 460 · 91
6. Turner · Acta Metall. · 1989 · 37 · 263510.1016/0001-6160(89)90296-4 ↗
7. Mabuchi · Scr. Metall. · 1989 · 23 · 176110.1016/0036-9748(89)90357-8 ↗
8. Kumar · 1991 · 288 · 481
9. Kumar · 1993 · 288 · 781
10. 1993 · 8 · 426
11. Hashimoto · J. Jpn. Inst. Metals · 1985 · 49 · 41010.2320/jinstmet1952.49.6_410 ↗
12. Villars · 1991 · 1 · 1021
13. Takahashi · 1993 · 288 · 711
14. T. Takahashi, T. Hasegawa, in: J.A. Horton, I. Baker, S. Hanada, R.D. Noebe, D.S. Schwarz, by I. Baker, R. Darolia, J.D. Whittenberger, M.H. Yoo (Eds.), High-Temperature Ordered Intermetallic Alloys VI, Mat. Res. Soc., Pittsburgh, 364 (1995), pp.1235–1240.
15. Kim · Acta Metall. Mater. · 1995 · 43 · 313910.1016/0956-7151(95)00010-S ↗