Fast in situ X-ray diffraction phase and stress analysis during complete heat treatment cycles of steel
Source abstract
Abstract
Abstract This paper presents results obtained with a method for time and temperature resolved analysis of changes in phase composition and stresses/residual stresses during complete heat treatment cycles of steel, including quenching. Sample temperatures of up to 930 °C could be reached with a specially designed furnace, where fast cooling of the samples was realized by gas quenching. Measurements for phase and stress analysis could be performed with an acquisition rate of at least one value every 3 s. Results concerning residual stress relaxation during heating, and stress/residual stress development during quenching are presented and discussed for AISI E52100 ball bearing steel. The observed stress development during quenching followed the expected transformation behavior with some deviations that could be explained through the effects of surface decarburization. The system developed proved to be a suitable tool for characterizing phase and stress changes that occur during heat treatment of steels, as a function of time and temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Hirsch · HTM · 2003 · 58 · 11010.1515/htm-2003-580605 ↗
2. Hoffmann · HTM · 2002 · 57 · 21310.1515/htm-2002-570317 ↗
3. Schüttenberg · HTM · 2004 · 59 · 18510.3139/105.100288 ↗
4. Frerichs · 2003
5. Rodriguez · 2000 · 891
6. Elmer · Scripta Mater. · 2000 · 43 · 75110.1016/S1359-6462(00)00481-4 ↗
7. Elmer · Metall. Mater. Trans. A · 1998 · 29A · 276110.1007/s11661-998-0317-5 ↗
8. Elmer · Metall. Mater. Trans. A · 2001 · 32A · 117510.1007/s11661-001-0127-5 ↗
9. Bruker · 1999
10. He · Adv. X-ray Anal. · 2000 · 42 · 429
11. Bruker · 2000
12. Hauk · 1997
13. He · 1997 · 634
14. He · Adv. X-ray Anal. · 1997 · 41 · 501
15. He · 1998 · 217
16. V. Tomala, In situ Eigenspannungsmessungen bei hohen Temperaturen in CVD-beschichteten Stahlsubstrat-Verbundwerkstoffen, Ph.D Thesis, University of Bremen, aren DTaP-Verlag GmbH, Bremen, 1999, p. 68.
17. Bruker · 1998
18. Hartmann · Mater. Sci. Eng. · 1995 · A190 · 23110.1016/0921-5093(94)09616-5 ↗
19. Hartmann · Mater. Sci. Eng. · 2002 · A325 · 41410.1016/S0921-5093(01)01465-4 ↗
20. Altpeter · 1999 · 407
21. Vöringer · 1982 · 144
22. Schlaak · 1987 · vol. 2 · 663
23. V. Tomala, In-situ Eigenspannungsmessungen bei hohen Temperaturen in CVD-beschichteten Stahlsubstrat-Verbundwerkstoffen, Ph.D. Thesis, arenDTaP-Verlag, Bremen, 1999, p. 76.
24. Hauk · 1997
25. Burgahm · 1993 · 203
26. Narazaki · 2002 · 248
27. A. Rose, H. Hougardy, Atlas der Wärmebehandlung der Stähle, Stahleisen, Düsseldorf, 1972, p. II-225E.
28. Dalgic · 2003 · 452
29. Dalgic · 2003 · 444
30. A. Weise, Entwicklung von Gefüge und Eigenspannungen bei der thermomechanischen Behandlung des Stahls 42CrMo4, Ph.D. Thesis, Technical University of Chemnitz, Flux Verlag, Chemnitz, 1998, p. 124.