journal article·2007-04

Studies on Al–Cu–Li–Mg–Ag–Zr alloy processed through vacuum induction melting (VIM) technique

Niraj Nayan, Govind, K. Suseelan Nair, M.C. Mittal, K.N. Sudhakaran

Publisher page

Abstract

Abstract A new technique of lithium addition has been adapted for the processing of Al–Cu–Li–Ag–Mg–Zr alloy, which gives more than 90% recovery of lithium throughout the billet. Processing studies on this alloy include casting, three step homogenization, to avoid incipient melting, and mechanical working particularly forging and rolling. The products in the form of sheets were subjected to various T6 (solution treatment + water quenching + aging) tempers. Mechanical properties were evaluated at room temperature and correlated with microstructure. Characterizations using optical microscope and post-fracture analysis have been carried out using Scanning electron microscope (SEM). Experimental investigation shows highest mechanical properties for the Al–1.3%Li alloy in T6 (500 °C/1 h + WQ + 190 °C/24 h) condition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Sanders · Met. Prog. · 1978 · 113 · 32
2. E.S. Balmuth, R. Schmidt, in: E.A. Strakes, Jr., T.H. Sanders, Jr. (Eds.), Proceedings of First International Conference on Al–Li alloys, Georgia, 1980, p. 69.
3. R.E. Lewis, D. Webster, I.G. Palmer, Air Force Materials Laboratory Contract F33615-77-C-5186, July 1978, TR AFML-78-102.
4. Peel · Mater. Sci. Tech. · 1986 · 21 · 169
5. Nair · Int. Met. Rev. · 1985 · 30 · 27510.1179/imr.1985.30.1.275 ↗
6. Geiger · Adv. Mater. Proc. · 1989 · 137 · 23
7. Shang · Mater. Sci. Eng. A · 1998 · 102 · 18110.1016/0025-5416(88)90573-3 ↗
8. Kamat · Acta Metall. · 1989 · 37 · 239510.1016/0001-6160(89)90037-0 ↗
9. Strake · J. Met. · 1981 · 33 · 24
10. Noble · J. Mater. Sci. · 1982 · 17 · 46110.1007/BF00591481 ↗
11. T.J. Lagan, J.R. Pickens, in: E.A. Strakes, Jr., T.H. Sanders, Jr. (Eds.), Proceeding of the Fifth International Conference on Al–Li Alloys, vol. II Williamsburg, 1989, p. 691.
12. J.R. Pickens, F.H. Heubaum, T.J. Lagan, L.S. Kramer, in: E.A. Strakes, Jr., T.H. Sanders, Jr. (Eds.), Proceeding of the Fifth International Conference on Al–Li Alloys, Birmingham, 1989, p. 1397.
13. Tack · Scr. Metall. Mater. · 1990 · 24 · 168510.1016/0956-716X(90)90528-O ↗
14. J. Diaoxin, T. Shixing, Z. Tietao, in: C.Q. Chen, E.A. Strakes, Jr. (Eds.), Proceedings of Second International Conference on Al alloys-Their Physical and Mechanical properties, Beijing, Int. Acad. pub. October 9–13 1990, p. 16.
15. F.W. Gayle, F.H. Heubaum, J.R. Pickens, IBID ref 8, pp. 1281–1291.
16. Kumar · Acta Mater. · 1997 · 45 · 231710.1016/S1359-6454(96)00360-6 ↗
17. Kelly · Prog. Mater Sci. · 1963 · 10 · 149
18. J.C. Huang, A.J. Ardell, in: G. Champier, et al. (Ed.), Proceedings of the Fourth International Al–Li Conference, 1987, p. C3-373.
19. Silcock's · J. Inst. Met. · 1959 · 88 · 357
20. R.J. Rioja, E.A. Ludwiczak, in: C. Baker, et al. (Ed.), Aluminum–lithium alloys III, Inst of Metals, London, 1986, pp. 471–482.
21. Gupta · Mater. Sci. Eng. A · 2006 · 420 · 22810.1016/j.msea.2006.01.045 ↗
22. Gayle · Scr. Metall. Mater. · 1990 · 24 · 7910.1016/0956-716X(90)90570-7 ↗
23. J.E. Hatch, Aluminum—Properties and Physical Metallurgy, American Society for Metals, Ohio, 1984, p. 230.
24. W.T. Tack, L.W. Loechel, in: T.H. Strake, E.A. Sanders (Eds.), Proceedings of the Fifth International Al–Li Conference, Birmingham, 1989, p. 1457.
25. Chen · JMEPEG · 1998 · 7 · 68210.1361/105994998770347576 ↗