journal article·2012-05

Mechanical and electrical characterization of Cu-2wt.% SWCNT nanocomposites synthesized by in situ reduction

M.E. Mendoza, I.G. Solórzano, E.A. Brocchi

Publisher page

Abstract

Abstract Copper–2 wt.% single walled carbon nanotubes (SWCNT) nano composites have been synthesized by a chemical method of dissociation of copper nitrate containing CNTs, followed by reduction under a H 2 atmosphere. Bulk nano-composite pellets were obtained by a pre-compactation under a uniaxial pressure of 60 MPa followed by isostatic pressure of 150 MPa and sintering under Ar atmosphere. Both X-ray diffraction and transmission electron microscopy (TEM) were used as characterization tools. The former confirmed the presence of pure metallic copper with carbon; and the later allowed for the observation of a good dispersion, and also for a proper adherence between Cu particles onto CNT. Powder copper particles were observed to be in the 50–300 nm range, while the bulk Cu–CNT grain size was observed to be in the 150 nm–3 μm range. The composite Cu–CNT presented less resistivity at low temperature (2 × 10 −6 Ω cm at 83 K) compared with copper. Hardness measured by nanoindentation exhibited higher values for the composite than for copper (1.7 GPa vs. 1.2 GPa).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Electronic Packaging and Soldering Technologies · Carbon Nanotubes in Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Kim · Materials Science and Engineering A · 2007 · 449–451 · 4610.1016/j.msea.2006.02.310 ↗
2. Quang · Journal of Materials Processing Technology · 2007 · 187–188 · 31810.1016/j.jmatprotec.2006.11.116 ↗
3. Treacy · Nature · 1996 · 381 · 67810.1038/381678a0 ↗
4. Tu · Tribology Letters · 2001 · 10 · 22510.1023/A:1016662114589 ↗
5. Curtin · Materials Today · 2004 · 4410.1016/S1369-7021(04)00508-5 ↗
6. Dujardin · Science · 1994 · 265 · 185010.1126/science.265.5180.1850 ↗
7. Wu · Journal of Materials Chemistry · 2002 · 12 · 191910.1039/b200470d ↗
8. Kim · Materials Science and Engineering A · 2006 · 430 · 2710.1016/j.msea.2006.04.085 ↗
9. Ayala · Chemical Physics Letters · 2006 · 431 · 10410.1016/j.cplett.2006.09.039 ↗
10. Harris · International Materials Review · 2004 · 4910.1179/095066004225010505 ↗
11. Chen · Composites Science and Technology · 2000 · 60 · 30110.1016/S0266-3538(99)00127-X ↗
12. Chen · Carbon · 2003 · 41 · 21510.1016/S0008-6223(02)00265-8 ↗
13. Dong · Materials Science and Engineering A · 2001 · 313 · 8310.1016/S0921-5093(01)00963-7 ↗
14. Chai · Journal of Micromechanics and Microengineering · 2008 · 18 · 4 pp10.1088/0960-1317/18/3/035013 ↗
15. Yang · Materials Letters · 2008 · 62 · 4710.1016/j.matlet.2007.04.086 ↗
16. Brocchi · Materials Science and Engineering B · 2004 · 112 · 20010.1016/j.mseb.2004.05.032 ↗
17. Jena · Materials Science and Engineering A · 2001 · 313 · 18010.1016/S0921-5093(00)01998-5 ↗
18. Sridhar · Journal of Materials Science · 2009 · 44 · 175010.1007/s10853-009-3290-5 ↗
19. Oliver · Journal of Materials Research · 1992 · 7 · 156410.1557/JMR.1992.1564 ↗
20. Hjortstam · Applied Physics A · 2004 · 78 · 117510.1007/s00339-003-2424-x ↗
21. Liu · Scripta Materialia · 2008 · 58 · 56410.1016/j.scriptamat.2007.11.017 ↗
22. Rester · Acta Materialia · 2007 · 55 · 642710.1016/j.actamat.2007.08.001 ↗
23. Ajit Prasad · Materials Letters · 1999 · 41 · 23410.1016/S0167-577X(99)00136-6 ↗
24. Dylan · Journal of Materials Research · 2004 · 19 · 16510.1557/jmr.2004.19.1.165 ↗
25. Bao · Acta Materialia · 2004 · 52 · 539710.1016/j.actamat.2004.08.002 ↗