journal article·2007-05

An assessment of creep strength reduction factors for 316L(N) SS welds

M.D. Mathew, S. Latha, K. Bhanu Sankara Rao

Materials Science and Engineering: A· Volume 456· Issue 1-2
Publisher page

Abstract

Abstract Nitrogen-alloyed type 316L stainless steel is the major structural material for the high temperature structural components of prototype fast breeder reactor. For the welding electrode, carbon in the normal range of 0.045–0.055 wt% and nitrogen in the range of 0.06–0.1 wt% are used to provide weld joints with adequate long term creep strength. Characterization of the creep properties of the base metal, weld metal and weld joint has been carried out at 873 and 923 K at stress levels of 100–325 MPa with rupture lives in the range of 100–33,000 h. Weld strength reduction factors (WSRFs) based on the weld metal, and weld joint have been evaluated, and compared with the codes. WSRFs for the weld joint were higher than the RCC-MR values. Base metal showed the highest rupture life at all the test conditions whereas the weld metal generally showed the lowest rupture life. All the weld joint specimens failed in the weld metal.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Nuclear Materials and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. ASME Boiler and Pressure Vessel Code, Section III, Division 1, Subsection NH, 2004. The American Society of Mechanical Engineers New York, New York, USA.
2. Corum · J. Press. Vess. Technol. · 1990 · 112 · 33310.1115/1.2929886 ↗
3. RCC MR Design Code, Section 1, Sub Section Z, 2002. French Society for Design and Construction Rules for Nuclear Island Components.
4. A Review of High Temperature Performance Trends and Design Rules for Cr–Mo Steel Weldments, EPRI Report TR-110807, (1998) 1–286.
5. B. Riou1, M. Sperandio, C. Escaravage, B. Drubay, M.-T. Cabrillat, Y. Mézière, B. Salles, Transactions of the 17th International Conference on Structural Mechanics in Reactor Technology (SMiRT 17), Prague, Czech Republic, August 17–22, 2003.
6. Tu · Int. J. Press. Vess. Pip. · 1996 · 66 · 17110.1016/0308-0161(95)00094-1 ↗
7. Chellapandi · Int. J. Press. Vess. Pip. · 2000 · 195 · 189
8. Mannan · Trans. Indian Inst. Met. · 2003 · 56 · 155
9. Sasikala · J. Nucl. Mater. · 1999 · 273 · 25710.1016/S0022-3115(99)00057-4 ↗
10. Weld strength reduction and creep fracture in nitrogen alloyed 316 stainless steel weldments
11. ASME Boiler and Pressure Vessel Code, Section VIII, Division 1, 2004. The American Society of Mechanical Engineers New York, New York, USA.
12. ASME Boiler and Pressure Vessel Code, Section III, Division 1, Appendix K, 2004. The American Society of Mechanical Engineers New York, New York, USA.
13. ASME Boiler and Pressure Vessel Code, Section III, Division 1, Subsection NB, 2004. The American Society of Mechanical Engineers New York, New York, USA.
14. Tu · Int. J. Press. Vess. Pip. · 1996 · 57 · 33510.1016/0308-0161(94)90039-6 ↗
15. Becht · J. Press. Vess. Technol. · 2006 · 128 · 4610.1115/1.2140291 ↗
16. Stoller · 2006
17. Jaske · J. Press. Vess. Technol. · 2000 · 122 · 29710.1115/1.556186 ↗