journal article·1995-06Open access

In situ metal-ceramic microstructures by partial reduction reactions in the NiAlO system and the role of ZrO2

E. Üstünda, P. Ret, R. Subramanian, R. Dieckmann, S.L. Sass

Abstract

Partial reduction reactions in the NiAlO system, starting with the spinel compound NiAl2O4, are used to form metal-ceramic microstructures in situ. Two different morphologies of nearly pure Ni particles, equiaxed and rod-like, form within a ceramic matrix, which is either α-Al2O3 or a metastable ‘defect spinel’ depending on the choice of processing parameters, such as reduction temperature, oxygen partial pressure and time. Electron microscopic studies were performed for microstructural characterization, phase identification and chemical analysis. The fracture toughness of the NiAl2O3 mixture was significantly improved with respect to that of the original spinal phase. The important issues that must be addressed to form useful metal-ceramic microstructures by partial reduction reactions are discussed. It is shown that cracking at the original spinel grain boundaries, probably due to the large volume change associated with the reduction reaction, can be avoided by the addition of small amounts of ZrO2. Initial results are presented illustrating the effect of ZrO2 on the microstructures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Nuclear materials and radiation effects

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Engineering Materials I
2. 1991
3. Elrefaie · J. Electrochem. Soc. · 1981 · 128 · 223710.1149/1.2127225 ↗
4. Üstünda · Acta Metall. Mater. · 1995 · 43 · 383
5. Üstünda · 1994 · 97
6. Subramanian · 1994 · 38 · 127
7. Üstünda · Acta Metall. Mater. · 1993 · 41 · 215310.1016/0956-7151(93)90385-6 ↗
8. Nose · J. Am. Ceram. Soc. · 1988 · 71 · 32810.1111/j.1151-2916.1988.tb05049.x ↗
9. Bassoul · J. Solid State Chem. · 1974 · 10 · 5610.1016/0022-4596(74)90010-3 ↗
10. Bassoul · J. Solid State Chem. · 1985 · 58 · 38310.1016/0022-4596(85)90221-X ↗
11. Davidge · J. Mater. Sci. · 1968 · 3 · 62910.1007/BF00757910 ↗
12. Claussen · J. Am. Ceram. Soc. · 1976 · 59 · 4910.1111/j.1151-2916.1976.tb09386.x ↗
13. Porter · J. Am. Ceram. Soc. · 1977 · 60 · 18310.1111/j.1151-2916.1977.tb15509.x ↗
14. Subramanian · Solid State Ionics · 1995 · 75 · 24110.1016/0167-2738(94)00148-L ↗
15. Bonvalot-Dubois · J. Am. Ceram. Soc. · 1988 · 71 · 29610.1111/j.1151-2916.1988.tb05862.x ↗
16. Heuer · J. Am. Ceram. Soc. · 1982 · 65 · 64210.1111/j.1151-2916.1982.tb09946.x ↗
17. Rühle · Prog. Mater. Sci. · 1989 · 33 · 8510.1016/0079-6425(89)90005-4 ↗
18. Effects of transition metal oxide addition on sintering, creep, and fracture properties in alumina
19. Lawn · J. Am. Ceram. Soc. · 1980 · 63 · 57410.1111/j.1151-2916.1980.tb10768.x ↗
20. Anstis · J. Am. Ceram. Soc. · 1981 · 64 · 53310.1111/j.1151-2916.1981.tb10320.x ↗
21. ASTM Standard E 399-90, Standard test method for plane-strain fracture toughness of metal materials
22. Srawley · Int. J. Fract. · 1976 · 12 · 47510.1007/BF00032844 ↗
23. Becher · J. Am. Ceram. Soc. · 1991 · 74 · 25510.1111/j.1151-2916.1991.tb06872.x ↗
24. Micromechanical materials modeling
25. Tuan · J. Eur. Ceram. Soc. · 1990 · 6 · 3110.1016/0955-2219(90)90032-B ↗
26. Breva · J. Mater. Sci. · 1992 · 27 · 146410.1007/BF00542904 ↗
27. Evans · J. Am. Ceram. Soc. · 1990 · 73 · 18710.1111/j.1151-2916.1990.tb06493.x ↗
28. Sigl · Acta Metall. Mater. · 1988 · 36 · 94510.1016/0001-6160(88)90149-6 ↗
29. The influence of the particle size on the deformation and debonding behavior os small ductile particles in the bridging zone of a crack in a brittle ceramic