High temperature tensile response of nano-Al2O3 reinforced AZ31 nanocomposites
Source abstract
Abstract
Abstract Nano-Al 2 O 3 reinforcement's capability to simultaneously enhance the room temperature (25 °C) strength and ductility of magnesium alloys has effectively been exploited in ingot metallurgy processed AZ31/1.5Al 2 O 3 nanocomposite in this study. Tensile characterization revealed that at high temperature (150–250 °C), instead of strengthening, the thermally stable nano-Al 2 O 3 reinforcement ironically exacerbated the softening of AZ31 alloy. However, an incredible increment in AZ31 alloy (with grain size of ∼2.3 μm) ductility (up to 184%) has been achieved in the nanocomposite with increasing temperature due to the incorporation of nano-Al 2 O 3 as reinforcement. Microstructural characterization of the nanocomposite revealed that the dynamic recrystallization process has induced a complete recrystallization in AZ31 alloy matrix at a relatively much lower temperature (150 °C) with tremendous grain growth near the fracture surface at higher temperature (250 °C). Fractography of the nanocomposite revealed that the room temperature mixed ductile mode fracture behavior of AZ31 alloy transformed to a complete ductile mode at high temperature due to the presence of nano-Al 2 O 3 particulates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Gupta · 2010
2. Logan · 2007 · 41
3. Kawalla · 2005 · 199
4. Myshlyaev. · Mater. Sci. Eng. · 2002 · A337 · 12110.1016/S0921-5093(02)00007-2 ↗
5. Paramsothy · J. Compos. Mater. · 2010 · 44 · 109910.1177/0021998309347573 ↗
6. Paramsothy · J. Nanosci. Nanotechnol. · 2010 · 10 · 95610.1166/jnn.2010.1809 ↗
7. Paramsothy · Compos. A: Appl. Sci. Manuf. · 2009 · 40 · 149010.1016/j.compositesa.2009.06.007 ↗
8. Paramsothy · Mater. Sci. Forum · 2009 · 618–619 · 42310.4028/www.scientific.net/MSF.618-619.423 ↗
9. Paramsothy · Mater. Sci. Eng. A · 2009 · 527 · 16210.1016/j.msea.2009.07.054 ↗
10. Paramsothy · J. Alloys Compd. · 2009 · 482 · 7310.1016/j.jallcom.2009.03.181 ↗
11. Tham · Mater. Sci. Technol. · 1999 · 15 · 113910.1179/026708399101505185 ↗
12. Ganesh · Mater. Res. Bull. · 2000 · 35 · 227510.1016/S0025-5408(00)00445-1 ↗
13. Gupta · Mater. Sci. Eng. A · 1996 · 210 · 11410.1016/0921-5093(95)10077-6 ↗
14. Eustathopoulos · 1999 · vol. 3
15. Nguyen · J. Alloys Compd. · 2008 · 459 · 24410.1016/j.jallcom.2007.05.038 ↗
16. Ferkel · Mater. Sci. Eng. A · 2001 · 298 · 19310.1016/S0921-5093(00)01283-1 ↗
17. Szaraz · Mater. Sci. Eng. A · 2007 · 462 · 22510.1016/j.msea.2006.01.182 ↗
18. Dai · Compos. Sci. Technol. · 2001 · 61 · 105710.1016/S0266-3538(00)00235-9 ↗
19. Hull · 2002
20. Avedesian · 1999
21. Laurent · J. Mater. Sci. · 1992 · 27 · 444710.1007/BF00541578 ↗
22. Tissier · J. Mater. Sci. · 1990 · 25 · 118410.1007/BF00585423 ↗
23. Dieter · 1988
24. Maksoud · Mater. Sci. Eng. A · 2009 · 504 · 4010.1016/j.msea.2008.10.033 ↗
25. H. Takuda, T. Morishita, T. Kinoshita, N. Shirakawa, Modelling of formula for flow stress of a magnesium alloy AZ31 sheet at elevated temperature, in: Proceedings of the 13th AMME Conference, Poland, 2005, pp. 671–674.10.1016/j.jmatprotec.2005.02.034 ↗
26. Friedrich · 2006
27. Hassan · J. Alloys Compd. · 2007 · 429 · 17610.1016/j.jallcom.2006.04.033 ↗
28. Hassan · J. Alloys Compd. · 2006 · 419 · 8410.1016/j.jallcom.2005.10.005 ↗
29. Ansell · 1970 · 1083
30. Yang · 1993
31. Reed-Hill · 1964