journal article·2019-05Open access

Strain-based approach to investigate intergranular stress corrosion crack initiation on a smooth surface of austenitic stainless steel

Tomoyuki Fujii, Ryohei Yamakawa, Keiichiro Tohgo, Yoshinobu Shimamura

Abstract

This study investigated stress corrosion cracking (SCC) nucleation in sensitized austenitic stainless steel from the viewpoint of grain boundary (GB) character and strain at a GB where SCC can nucleate. Prior to SCC testing, normal and shear strains were measured on the surface of a specimen subjected to an initial strain of 1% via the digital image correlation (DIC) technique. Then, SCC testing was conducted under a constant load corresponding to the initial strain in a tetrathionate solution. After testing, crystal orientations in the specimen surface were measured by the electron backscattered diffraction (EBSD) technique. The relationship among crack initiation sites, GB character measured by EBSD, and strains measured by DIC is discussed. Stress corrosion cracks were found to be mainly initiated at random large-angle boundaries. The sites of intergranular crack initiation were characterized using the maximum normal strain along GBs, while the shear strain did not affect the crack initiation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Non-Destructive Testing Techniques · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Mechanochemical model to predict stress corrosion crack growth of stainless steel in high temperature water10.1016/S0010-938X(00)00173-6 ↗
2. Formulating stress corrosion cracking growth rates by combination of crack tip mechanics and crack tip oxidation kinetics10.1016/j.corsci.2009.10.041 ↗
3. Fracture mechanics study on stress corrosion cracking behavior under corrosive environment
4. Evaluation of stress corrosion cracking behavior around the interface between alloy 182 and low alloy steel by KJ10.3323/jcorr.61.177 ↗
5. Crack growth kinetics across weld interface between alloy 182 and low alloy steel ant that between alloy 180 and metals to simulated weld dilution zone10.3323/jcorr.63.25 ↗
6. The effects of cold rolling orientation and water chemistry on stress corrosion cracking behavior of 316L stainless steel in simulated PWR water environments10.1016/j.jnucmat.2016.01.018 ↗
7. Stress corrosion cracking initiation and short crack growth behaviour in Alloy 182 weld metal under simulated boiling water reactor hydrogen water chemistry conditions10.1016/j.corsci.2017.11.021 ↗
8. Characterization of stress corrosion crack growth in austenitic stainless steel under variable loading in small- and large-scale yielding conditions10.1016/j.engfracmech.2018.11.020 ↗
9. Stress-corrosion crack initiation process model for BWR plant materials
10. A process model for the initiation of stress corrosion crack growth in BWR plant materials
11. A model to predict the evolution of pitting corrosion and the pit-to-crack transition incorporating statistically distributed input parameters10.1016/j.corsci.2005.08.010 ↗
12. Crack initiation model for sensitized 304 stainless steel in high temperature water10.1016/j.corsci.2005.09.015 ↗
13. Monte Carlo simulation of stress corrosion cracking on a smooth surface of sensitized stainless steel type 30410.1016/j.corsci.2009.06.013 ↗
14. Experimental and numerical investigation of stress corrosion cracking of sensitized type 304 stainless steel under high-temperature and high-purity water10.1016/j.corsci.2015.05.001 ↗
15. Study of grain boundary character along intergranular stress corrosion crack paths in austenitic alloys10.1016/S1359-6454(01)00064-7 ↗
16. Crystallographic and mechanical investigation of intergranular stress corrosion crack initiation in austenitic stainless steel10.1016/j.msea.2019.02.069 ↗
17. Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering10.1016/S1359-6454(02)00064-2 ↗
18. Improving the intergranular corrosion resistance of 304 stainless steel by grain boundary network control10.1016/j.corsci.2011.02.005 ↗
19. Improvement of corrosion resistance in austenitic stainless steel by grain boundary character distribution control10.3323/jcorr.61.359 ↗
20. Tracking the evolution of intergranular corrosion through twin-related domains in grain boundary networks
21. Influence of local stress on initiation behavior of stress corrosion cracking for sensitized 304 stainless steel10.1016/j.corsci.2007.01.011 ↗
22. Finite element analysis of the influence of elastic anisotropy on stress intensification at stress corrosion cracking initiation sites in fcc alloys10.1016/j.jnucmat.2018.01.050 ↗
23. Prediction of SCC initiation in weld components by multi-scale analysis incorporating crystal plasticity
24. A model for the normal stress dependence of intergranular cracking of irradiated 316L stainless steel in supercritical water10.1016/j.jnucmat.2010.11.012 ↗
25. Grain boundary structure and intergranular stress corrosion crack initiation in high temperature water of a thermally sensitised austenitic stainless steel, observed in situ10.1016/j.corsci.2014.04.050 ↗
26. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review10.1088/0957-0233/20/6/062001 ↗
27. Micro- and nanoscale deformation measurement of surface and internal planes via digital image correlation10.1007/s11340-006-0531-2 ↗
28. Nanoscale deformation and cracking studies of advanced metal evaporated magnetic tapes using atomic force microscopy and digital image correlation techniques
29. Microscopic strain mapping using scanning electron microscopy topography image correlation at large strain10.1243/030932405X16151 ↗
30. Crystallography of intergranular corrosion in sensitized austenitic stainless steel10.1016/j.matchar.2018.07.014 ↗
31. The structure of high-angle grain boundaries10.1016/0001-6160(66)90168-4 ↗
32. Bunge · 1985 · 73
33. The plotting of observations on probability paper10.1111/j.1467-9574.1953.tb00821.x ↗
34. The study of stress application and corrosion cracking on Ni-16 Cr-9 Fe (Alloy 600) C-ring samples by polychromatic X-ray microdiffraction10.1016/j.actamat.2011.10.040 ↗
35. Characterization and perspective of stress corrosion cracking of austenitic stainless steels (type 304 and type 316) in acid solutions using constant load method10.1016/j.corsci.2006.05.011 ↗
36. Ncorr: Open-Source 2D Digital Image Correlation Matlab Software10.1007/s11340-015-0009-1 ↗