journal article·2017-04

The effect of surface corrosion damage on the fatigue life of 6061-T6 aluminum alloy extrusions

Matthew Weber, Paul D. Eason, Hüseyin Özdeş, Murat Tiryakioğlu

Publisher page

Abstract

Abstract An investigation was performed where 6061-T6 extrusions were exposed to a 3.5% NaCl solution at pH 2 for 2 days and 24 days to create distinct surface flaws. The effect of these flaws on the rotating beam fatigue life was then investigated and analyzed by using Wohler curves, Weibull statistics and scanning electron microscopy (SEM). It was determined that corrosion damage reduced the fatigue life significantly and specimens corroded for both 2-days and 24-days exhibited similar fatigue lives. Statistical analyses showed that fatigue life of all three datasets followed the 3-parameter Weibull distribution and the difference between the fatigue lives of two corroded datasets was statistically insignificant. Analysis of fracture surfaces showed that sizes of pits that led to fatigue crack initiation were very different in the two corroded datasets. Implications of the similarity in fatigue lives despite disparity in surface condition are discussed in detail in the paper.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Koch · 2002
2. Dieter · 1986
3. Chen · Mater. Sci. Eng.: A · 1996 · 219 · 12610.1016/S0921-5093(96)10414-7 ↗
4. Gruenberg · Int. J. Fatigue · 2004 · 26 · 62910.1016/j.ijfatigue.2003.10.011 ↗
5. van der Walde · Int. J. Fatigue · 2007 · 29 · 126910.1016/j.ijfatigue.2006.10.010 ↗
6. Yang · Metals · 2016 · 6 · 16010.3390/met6070160 ↗
7. Chu · 1978
8. Basquin · Proc. ASTM · 1910 · 10 · 625
9. Kun · Phys. Rev. Lett. · 2008 · 100 · 09430110.1103/PhysRevLett.100.094301 ↗
10. Collins · 1993
11. Manson · Exp. Mech. · 1965 · 5 · 19310.1007/BF02321056 ↗
12. H. Özdeş, M. Tiryakioğlu, Materials Science and Engineering A, in print.
13. Pearson · Eng. Fract. Mech. · 1975 · 7 · 23510.1016/0013-7944(75)90004-1 ↗
14. Tiryakioğlu · Mater. Sci. Eng.: A · 2008 · 497 · 11910.1016/j.msea.2008.06.023 ↗
15. Tiryakioğlu · Mater. Sci. Eng.: A · 2008 · 476 · 17410.1016/j.msea.2007.04.088 ↗
16. Tiryakioğlu · Mater. Sci. Eng.: A · 2010 · 527 · 156010.1016/j.msea.2009.10.027 ↗
17. Tiryakioğlu · Mater. Sci. Eng.: A · 2009 · 520 · 11410.1016/j.msea.2009.05.005 ↗
18. Tiryakioğlu · Metall. Mater. Trans. A · 2009 · 40 · 162310.1007/s11661-009-9847-8 ↗
19. Paris · J. Basic Eng. · 1963 · 85 · 52810.1115/1.3656900 ↗
20. Rokhlin · Eng. Fract. Mech. · 1999 · 62 · 42510.1016/S0013-7944(98)00101-5 ↗
21. DuQuesnay · Int. J. Fatigue · 2003 · 25 · 37110.1016/S0142-1123(02)00168-8 ↗
22. Medved · Int. J. Fatigue · 2004 · 26 · 7110.1016/S0142-1123(03)00069-0 ↗
23. Sankaran · Mater. Sci. Eng.: A · 2001 · 297 · 22310.1016/S0921-5093(00)01216-8 ↗
24. Cerit · Eng. Fail. Anal. · 2009 · 16 · 246710.1016/j.engfailanal.2009.04.004 ↗
25. Dominguez Almaraz · Procedia Eng. · 2010 · 2 · 80510.1016/j.proeng.2010.03.087 ↗
26. Laz · Int. J. Fatigue · 1998 · 20 · 26310.1016/S0142-1123(97)00136-9 ↗
27. Pao · Scr. Mater. · 2000 · 43 · 39110.1016/S1359-6462(00)00434-6 ↗
28. Miller · Mater. Sci. Technol. · 1993 · 9 · 45310.1179/mst.1993.9.6.453 ↗
29. Sarkani · Eng. Fract. Mech. · 2007 · 74 · 297110.1016/j.engfracmech.2006.08.026 ↗
30. Weibull · J. Appl. Mech. · 1951 · 18 · 29310.1115/1.4010337 ↗
31. Kaplan · J. Am. Stat. Assoc. · 1958 · 53 · 45710.1080/01621459.1958.10501452 ↗
32. Huang · Int. J. Fatigue · 2016 · 88 · 21710.1016/j.ijfatigue.2016.03.035 ↗
33. Tiryakioğlu · Mater. Sci. Eng.: A · 2013 · 559 · 44710.1016/j.msea.2012.08.124 ↗