Microstructural evolution and room-temperature mechanical properties of as-cast and heat-treated Fe50Al50−nNbn alloys (n=1, 3, 5, 7, and 9at%)
Source abstract
Abstract
Abstract The microstructural evolution and room-temperature mechanical properties of Fe50Al50−nNbn alloys (n=1, 3, 5, 7, and 9 at%) were investigated after solidification and subsequent heat treatment. For all the compositions, the (Fe, Al)2Nb Laves phase formed because of the incomplete solid solubility of Nb in the Fe–Al-based phases and tended to develop an eutectic mixture with the Fe–Al-based phase. According to the results of EDS analysis and microstructural investigations, the Nb concentration of the eutectic composition was 9 at%, and the solid solubility of Nb in the B2-type Fe–Al-based phase was 3 at%. In addition, the eutectic phase transition temperature was approximately 1265 °C. Compared with the as-cast state, all the heat-treated alloys exhibited ultrahigh compressive strength and considerably increased compressive fracture strains. The heat-treated hypoeutectic Fe50Al47Nb3 alloy exhibited the highest compressive strength and fracture strain of 3.02 GPa and 33.1%, respectively, and the eutectic Fe50Al41Nb9 alloy exhibited the lowest compressive strength and fracture strain of 2.66 GPa and 21.8%, respectively, because of the absence of the comparably softer Fe–Al-based primary dendrites. The superior mechanical properties of the heat-treated alloys were attributed to the bimodal distribution of the microstructure, structural incoherency between the crystalline phases, and elimination of solidification artifacts and lattice defects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metallic Glasses and Amorphous Alloys · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Iron-aluminum base alloys, a review of their feasibility as high temperature materials
2. Deformation and fracture of intermetallics10.1016/0956-7151(93)90148-L ↗
3. Nickel and iron aluminides: an overview on properties, processing, and applications10.1016/0966-9795(95)00056-9 ↗
4. Ordered intermetallic alloys: an assessment10.1016/S0966-9795(97)00045-9 ↗
5. Iron aluminides: present status and future prospects10.1016/S0921-5093(98)00909-5 ↗
6. Emerging applications of intermetallics10.1016/S0966-9795(00)00077-7 ↗
7. Concepts derived from phase diagram studies for the strengthening of Fe–Al-based alloys10.1016/j.intermet.2004.10.015 ↗
8. Mechanical properties and oxidation behaviour of two-phase iron aluminium alloys with Zr(Fe,Al)2 Laves phase or Zr(Fe,Al)12 τ1 phase10.1016/j.intermet.2004.08.013 ↗
9. Physical metallurgy and mechanical properties of ductile ordered alloys10.1179/imr.1984.29.1.168 ↗
10. McKamey · 1996
11. Ductile ordered intermetallic alloys10.1126/science.226.4675.636 ↗
12. Flow and fracture of Fe-Al10.1016/0025-5416(87)90549-0 ↗
13. Microstructure and tensile properties of Fe-40 At. pct Al alloys with C, Zr, Hf, and B additions10.1007/BF02663202 ↗
14. Ordered intermetallic alloys, Part I: nickel and iron aluminides10.1007/BF03223218 ↗
15. Effect of temperature on the tensile properties and dislocation structures of FeAl alloys10.1016/S0921-5093(98)00507-3 ↗
16. Effects of strain rate and manganese addition on room temperature ductility of FeAl10.1016/0956-716X(94)90446-4 ↗
17. Effects of Mn on fracture behaviour of DO3 Fe3Al-based intermetallic alloy10.1023/A:1004347709024 ↗
18. Multiphase intermetallic alloys for structural applications10.1016/S0966-9795(00)00045-5 ↗
19. Laves phase-based materials: microstructure, deformation modes and properties10.1557/PROC-460-677 ↗
20. Strengthening of iron aluminide alloys by atomic ordering and Laves phase precipitation for high-temperature applications10.1016/j.intermet.2004.12.029 ↗
21. Deformation behaviour and oxidation resistance of single-phase and two-phase L21-ordered Fe–Al–Ti alloys10.1016/j.intermet.2004.03.017 ↗
22. hases and phase equilibria in the Fe–Al–Zr system10.1515/ijmr-2004-0096 ↗
23. Effects of titanium addition on the microstructure and mechanical behavior of iron aluminide Fe3Al10.2320/matertrans.42.484 ↗
24. High strength ultrafine eutectic Fe–Nb–Al composites with enhanced plasticity10.1016/j.intermet.2008.01.005 ↗
25. Propagation of shear bands and accommodation of shear strain in the Fe56Nb4Al40 ultrafine eutectic-dendrite composite10.1063/1.2892038 ↗
26. Formation of a bimodal structure in ultrafine Ti–Fe–Nb alloys with high-strength and enhanced ductility10.1016/j.msea.2014.04.088 ↗
27. Favorable microstructural modulation and enhancement of mechanical properties of Ti–Fe–Nb ultrafine composites10.1080/09500830903236020 ↗
28. Novel Ti-base nanostructure–dendrite composite with enhanced plasticity10.1038/nmat792 ↗
29. High-strength bulk Al-based bimodal ultrafine eutectic composite with enhanced plasticity10.1557/jmr.2009.0297 ↗
30. Fe–Al–Nb phase diagram investigation and directional growth of the (Fe, Al)2Nb–(Fe, Al, Nb)ss eutectic system10.1016/j.jallcom.2005.03.038 ↗
31. Directional growth and characterization of Fe–Al–Nb eutectic alloys10.1016/S0022-0248(98)01128-2 ↗
32. Phase equilibria in the Fe corner of the Fe–Al–Nb system between 800 and 1150°C10.1016/j.jallcom.2008.07.036 ↗
33. Solidification and high-temperature phase equilibria in the Fe–Al-rich part of the Fe–Al–Nb system10.1016/j.intermet.2009.12.022 ↗
34. Phase equilibria in the Fe–Al–Nb system: Solidification behaviour, liquidus surface and isothermal sections10.1016/j.intermet.2014.12.008 ↗
35. Effect of ternary alloying elements addition on the order-disorder transformation temperatures of B2-type ordered Fe-Al-X intermetallics10.1007/s11661-011-1059-3 ↗
36. Effect of ternary alloying elements addition on atomic ordering characteristics of Fe–Al intermetallics10.1016/S1359-6454(99)00087-7 ↗
37. Microstructure characterization and room temperature deformation of a rapidly solidified NiAl-based eutectic alloy containing trace Dy10.1016/j.jcrysgro.2005.12.089 ↗
38. Room temperature fracture of FeAl and NiAl10.1016/1044-5803(91)90060-H ↗
39. The relationship between point defects and mechanical properties in Fe-Al at room temperature
40. The effect of temperature and Fe:Al ratio on the flow and fracture of FeAl10.1016/0956-7151(94)00369-S ↗
41. Effects of deviations from stoichiometry on the deformation behaviour of FeAl at intermediate temperatures10.1016/S0966-9795(98)00104-6 ↗
42. Correlation of the hardness and vacancy concentration in FeAl10.1016/0966-9795(93)90028-T ↗
43. Diffusion mechanism and defect concentrations in β′-FeAl, an intermetallic compound with B2 structure10.1016/0966-9795(94)P3690-P ↗
44. Vacancies, vacancy aggregates and hardening in FeAl10.1016/S0921-5093(98)00922-8 ↗
45. Quenching and ageing effects on defects and their structures in FeAl alloys, and the influence on hardening and softening10.1016/S1359-6462(97)00468-5 ↗
46. Ultrafine composite microstructure in a bulk Ti alloy for high strength, strain hardening and tensile ductility10.1016/j.actamat.2005.11.011 ↗
47. Dieter · 1986
48. High-temperature strength and room-temperature toughness of Nb–W–Si–B alloys prepared by arc-melting10.1016/j.msea.2003.08.014 ↗
49. A dislocation shielding prediction of the toughness transition during cleavage of semibrittle crystals10.1007/BF02656623 ↗
50. Kou · 2002
51. Microstructure, precipitates and compressive properties of various holmium doped NiAl/Cr (Mo, Hf) eutectic alloys
52. Phase alignment and crystal orientation of Al3Ni in Al–Ni alloy by imposition of a uniform high magnetic field10.1016/j.jcrysgro.2007.12.045 ↗
53. Correlating the microstructure and tensile properties of a thixomolded AZ91D magnesium alloy10.1016/S1359-6454(01)00015-5 ↗
54. Nanostructure–dendrite composites in the Fe–Zr binary alloy system exhibiting high strength and plasticity10.1016/j.scriptamat.2007.08.004 ↗
55. High-strength Ti-base ultrafine eutectic with enhanced ductility10.1063/1.2105998 ↗
56. Microstructural investigation and phase relationships of Fe-Al-Hf Alloys10.1007/s11661-014-2287-0 ↗
57. Microstructure evolution and mechanical behavior of as-cast, heat treated and directionally solidified Fe–15Al–10Nb alloys10.1016/j.intermet.2014.06.016 ↗