Fluxless soldering with surface abrasion for joining metal foams
Source abstract
Abstract
Abstract Fluxless soldering with surface abrasion has been developed for joining aluminum foams. To improve the wettability of the molten filler metal on the joined surfaces, 2 methods of abrasion were used to remove the oxide film from the aluminum foams prior to soldering. The effectiveness of the abrasion was determined by microstructure observation. The mechanical properties of the joints were examined by tension and compression tests. Assisting with the mechanical abrasion, fluxless soldering using a Zn-based alloy was proven suitable for joining aluminum foams. The joints showed no visible macroscopic deformation and did not cause the foam structure to collapse, which indicates a good wetting process. The mechanical properties of the joints were similar to the parent material, and a higher compressive strength was achieved. Fluxless soldering with surface abrasion not only offers an alternative means to join aluminum foams but also lays the foundation for joining metal foams by soldering.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Aluminum Alloys Composites Properties · Nanoporous metals and alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Banhart · Prog. Mater. Sci. · 2001 · 46 · 55910.1016/S0079-6425(00)00002-5 ↗
2. Lefebvre · Adv. Eng. Mater. · 2008 · 10 · 77510.1002/adem.200800241 ↗
3. Andrews · Mater. Sci. Eng. A · 1999 · 270 · 11310.1016/S0921-5093(99)00170-7 ↗
4. Sugimura · Acta Mater. · 1997 · 45 · 524510.1016/S1359-6454(97)00148-1 ↗
5. Koza · Mater. Lett. · 2003 · 58 · 13210.1016/S0167-577X(03)00430-0 ↗
6. Liu · Mater. Sci. Eng. A · 2010 · 527 · 796110.1016/j.msea.2010.08.027 ↗
7. Olurin · Mater. Sci. Eng. A · 2002 · 328 · 33410.1016/S0921-5093(01)01809-3 ↗
8. Schwingel · Acta Astronaut. · 2007 · 61 · 32610.1016/j.actaastro.2007.01.022 ↗
9. Banhart · Int. J. Veh. Des. · 2005 · 37 · 11410.1504/IJVD.2005.006640 ↗
10. Hall · Scr. Mater. · 2002 · 46 · 51310.1016/S1359-6462(02)00024-6 ↗
11. Bernard · Adv. Eng. Mater. · 2002 · 4 · 79810.1002/1527-2648(20021014)4:10<798::AID-ADEM798>3.0.CO;2-Z ↗
12. Haferkamp · Sci. Technol. Weld. Joining · 2004 · 9 · 6510.1179/136217104225017170 ↗
13. Reisgen · J. Eng. Gas Turbines Power · 2010 · 132 · 054502-110.1115/1.3204512 ↗
14. Born · Adv. Eng. Mater. · 2003 · 11 · 77910.1002/adem.200310102 ↗
15. Kitazono · Mater. Sci. Eng. A · 2002 · 327 · 12810.1016/S0921-5093(01)01766-X ↗
16. Wang · Acta Metall. Sinica · 2009 · 45 · 723
17. Wang · Trans. Chin. Weld. Inst. · 2008 · 29 · 1
18. Jarvis · Mater. Sci. Eng. A · 2011 · 528 · 259210.1016/j.msea.2010.11.077 ↗
19. Findenegg · Curr. Opin. Colloid Interface Sci. · 1997 · 2 · 30110.1016/S1359-0294(97)80039-8 ↗
20. Murray · J. Phase Equilib. · 1983 · 4 · 55