journal article·2009-01

Full-field measurement technique and its application to the analysis of materials behaviour under plane strain mode

J.L. Dournaux, S. Bouvier, A. Aouafi, P. Vacher

Materials Science and Engineering: A· Volume 500· Issue 1-2
Publisher page

Abstract

The purpose of the paper is to provide a comprehensive experimental and numerical analysis of one of the encountered and critical state modes in sheet metal forming processes. The study is carried out with the help of the full-field measurement techniques. In order to confer some generality to the proposed work, several materials and different specimen shapes are considered that exhibit more or less homogeneous strain field. The proposed experimental study of the plane strain test is completed by a preliminary identification of the material parameters for non-linear behaviour at finite strains, using heterogeneous strain field.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Advanced Surface Polishing Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Deformation analysis of large sized panels in the press shop
2. Bouvier · J. Mater. Process. Technol. · 2006 · 172 · 9610.1016/j.jmatprotec.2005.09.003 ↗
3. Bouvier · J. Mater. Process. Technol. · 2006 · 174 · 11510.1016/j.jmatprotec.2005.04.086 ↗
4. P. Vacher, S. Dumoulin, F. Morestin, S. Mguil-Touchal, Bidimensional deformation measurement using digital images. Proc. Instn. Mech. Engrs. vol. 213 Part C ImechE, 1999, pp. 811-817.10.1243/0954406991522428 ↗
5. Rao · Mater. Sci. Eng. · 1983 · 60 · 12510.1016/0025-5416(83)90182-9 ↗
6. P. Genevois. Etude expérimentale et modélisation du comportement plastique anisotrope de tôles d’acier en grandes déformations. Ph.D. Thesis, Institut National Polytechnique de Grenoble, France, 1992.
7. Hoc · Int. J. Plast. · 2001 · 17 · 6510.1016/S0749-6419(00)00019-X ↗
8. P. Flores. Development of experimental equipment and identification procedures for sheet metal constitutive laws. Ph.D. Thesis, University of Liege, Belgium. 2006.
9. Haddadi · 2005 · 85
10. An · J. Mater. Process. Technol. · 2004 · 155–156 · 161610.1016/j.jmatprotec.2004.04.344 ↗
11. Wagoner · Int. J. Mech. Sci. · 1979 · 21 · 22510.1016/0020-7403(79)90001-8 ↗
12. Wagoner · Met. Trans. A · 1980 · 11A · 16510.1007/BF02700453 ↗
13. Wagoner · Met. Trans. A · 1983 · 14A · 148710.1007/BF02664833 ↗
14. Laukonis · Met. Trans. A · 1985 · 16A · 42110.1007/BF02814340 ↗
15. Kuwabara · Tetsu-to-Hagane · 2002 · 88 · 33410.2355/tetsutohagane1955.88.6_334 ↗
16. Dumoulin · J. Mater. Process. Technol. · 2003 · 133 · 7910.1016/S0924-0136(02)00247-9 ↗
17. Belhabib · 2005
18. Menezes · J. Mater. Process. Technol. · 2000 · 97 · 10010.1016/S0924-0136(99)00345-3 ↗
19. Nelder · Comput. J. · 1965 · 7 · 30810.1093/comjnl/7.4.308 ↗
20. Kim · Int. J. Plast. · 2007 · 23 · 138010.1016/j.ijplas.2007.01.006 ↗
21. M. Rabahallah, T. Balan, S. Bouvier, B. Bacroix, F. Barlat, K. Chung, C. Teodosiu, Int. J. Plast., 2008 (paper avalaible online).
22. Belhabib · Int. J. Mech. Sci. · 2008 · 50 · 1410.1016/j.ijmecsci.2007.05.009 ↗
23. C. Sylvestre, J.L. Dournaux, J. Fryet, LPMTM Internal Report. University Paris 13, France, 2004.