journal article·2004-02

Generalized means as an approach for predicting Young’s moduli of multiphase materials

Shaocheng Ji

Publisher page

Abstract

Abstract Difficulties associated with specifying details of microstructure and distributions of internal stress and strain within multiphase materials prompt the development of semi-empirical models to connect the effective properties of composites to the properties of the components. We propose here the generalized means as an approach for predicting the Young’s modulus (E) of an isotropic multiphase composite material in terms of its component properties, volume fractions, and microstructures. The microstructures are expressed by a scaling parameter J, which is mainly controlled by the phase geometry, continuity, and connectivity. The case J=1 yields the arithmetic mean or Voigt average and the case J=−1 yields the harmonic mean or Reuss average. The geometrical mean occurs as J approaches 0. The means with J=−0.25 and J=0.25 provide a quite good agreement with the experimental data of Young’s modulus for a wide variety of two-phase composites with weak-phase continuous (Vs≤0.5) and strong-phase continuous (Vs≥0.7) structures, respectively. In the intermediate range (0.5≤Vs≤0.7), J is expected to vary progressively from −0.25 to 0.25 due to the transition in microstructure. For porous materials (e.g., glass foams) with non-interconnecting spherical pores, J=∼0.5. Thus the generalized means offers a promising approach for the prediction of elastic properties of multiphase materials if the microstructural exponent J has been determined.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Composite Material Mechanics · Asphalt Pavement Performance Evaluation · Numerical methods in engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. S. Ji, Q. Wang, B. Xia, Handbook of Seismic Properties of Minerals, Rocks and Ores, Polytechnic International Press, Montreal, 2002, p. 630.
2. Hill · Proc. Phys. Soc. London · 1952 · 65A · 34910.1088/0370-1298/65/5/307 ↗
3. Gurland · Mater. Sci. Eng. · 1979 · 40 · 5910.1016/0025-5416(79)90008-9 ↗
4. S. Ji, B. Xia, Rheology of Polyphase Earth Materials, Polytechnic International Press, Montreal, 2002, p. 260.
5. Tharp · Tectonophysics · 1983 · 96 · T110.1016/0040-1951(83)90216-0 ↗
6. Knudson · J. Am. Ceram. Soc. · 1962 · 45 · 45210.1111/j.1151-2916.1962.tb11191.x ↗
7. Spriggs · J. Am. Ceram. Soc. · 1962 · 45 · 40010.1111/j.1151-2916.1962.tb11180.x ↗
8. Berge · Geophysics · 1995 · 60 · 10810.1190/1.1443738 ↗
9. Doi · Metall. Trans. · 1970 · 1 · 141710.1007/BF02900264 ↗
10. Perrott · Wear · 1978 · 47 · 8110.1016/0043-1648(78)90205-3 ↗
11. McDanels · Metall. Trans. · 1985 · 16A · 110510.1007/BF02811679 ↗
12. Lloyd · Acta Metall. Mater. · 1991 · 39 · 5910.1016/0956-7151(91)90328-X ↗
13. Yang · Acta Metall. Mater. · 1991 · 39 · 186310.1016/0956-7151(91)90155-T ↗
14. Chen · Mater. Res. Stud. · 1969 · 9 · 29
15. Gustafson · Acta Mater. · 1997 · 45 · 163310.1016/S1359-6454(96)00277-7 ↗
16. Braem · J. Mater. Sci. · 1987 · 22 · 203710.1007/BF01132936 ↗
17. Ishai · Int. J. Mech. Sci. · 1967 · 9 · 53910.1016/0020-7403(67)90053-7 ↗
18. Kenyon · Polym. Eng. Sci. · 1967 · 7 · 18910.1002/pen.760070311 ↗
19. Richard · J. Composite Mater. · 1975 · 9 · 10810.1177/002199837500900201 ↗
20. Smith · J. Res. Nat. Bur. Stand. (US) · 1976 · 80A · 4510.6028/jres.080A.008 ↗
21. Zhang · Geophysics · 1996 · 61 · 142910.1190/1.1444068 ↗
22. Hashin · J. Mech. Phys. Solids · 1963 · 11 · 12710.1016/0022-5096(63)90060-7 ↗
23. Paul · Trans. Metall. Soc. AIME · 1960 · 218 · 36
24. Hasselman · J. Am. Ceram. Soc. · 1965 · 48 · 21810.1111/j.1151-2916.1965.tb14720.x ↗
25. Hasselman · J. Am. Ceram. Soc. · 1965 · 48 · 54810.1111/j.1151-2916.1965.tb14668.x ↗
26. Ravichandran · J. Am. Ceram. Soc. · 1994 · 77 · 117810.1111/j.1151-2916.1994.tb05390.x ↗