Determination of the constitutive behaviour of AA6022-T4 aluminium alloy spot welds at large strains
Source abstract
Abstract
Abstract There is increasing demand within the automotive industry to utilize aluminium alloy sheets and their spot welds to facilitate vehicle weight reduction and increase fuel economy. While traditional uniaxial tensile testing only determines mechanical properties to small strains, direct measurement of the constitutive behaviour of aluminium alloy spot welds to large strains remains a challenge. For the first time, the present work employed digital image correlation coupled with shear testing to directly measure the constitutive behaviour of an AA6022-T4 spot weld to large strains. The results show that the spot welding process not only decreases the yield strength but also lowers the work hardening rate of the nugget versus the base material. The paint bake cycle partially recovers the yield and shear strength of the nugget.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Non-Destructive Testing Techniques · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. E.P. Patrick, M.L. Sharp, Joining Aluminum Auto Body Structure, SAE paper 920282, SAE International, Warrendale, PA, U.S.A., 1992.10.4271/920282 ↗
2. American Welding Society: Welding Handbook, ninth ed., vol. 1, Miami, FL. U.S.A., 2001, pp. 247–256.
3. ANSI/AWS/SAE/D8.9M, Recommended Practices for Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials, American Welding Society, Miami, FL, U.S.A., 2002.
4. M. Zhou, S.J. Hu, H. Zhang: Critical Specimen Size for Tensile-Shear Testing of Steel Sheets, Welding Journal, 1999, 78: 305-s-313-s.
5. Chao · J. Eng. Mater. Technol. · 2003 · 125 · 12510.1115/1.1555648 ↗
6. A.P. Reynolds, F. Duvall: Digital Image Correlation for Determination of Weld and Base Metal Constitutive Behavior, Welding Journal, 1999, 78: 355-s-360-s.
7. Boyce · Metall. Mater. Trans. A · 2006 · 37 · 248110.1007/BF02586221 ↗
8. Tong · Metall. Mater. Trans. A · 2005 · 36A · 265110.1007/s11661-005-0263-4 ↗
9. Tao · J. Mater. Eng. Perform. · 2008 · 17 · 51710.1007/s11665-007-9170-8 ↗
10. ASTM Standard B 831-93, Standard Test Method for Shear Testing of Thin Aluminum Alloy Products, 2005 Annual Book of ASTM Standards, West Conshohocken, PA, vol. 02.02, 2005, pp. 601–603.
11. Kang · ASME J. Eng. Mater. Technol. · 2008 · 13010.1115/1.2931151 ↗
12. D.R. Sigler, J.G. Schroth, M.J. Karagoulis, D. Zuo, New electrode weld face geometries for spot welding aluminum, Proceedings of the Sheet Metal Welding Conference XIV, American Welding Society, Livonia, MI, U.S.A., May 11–14, 2010.
13. D.R. Sigler, M.J. Karagoulis, Welding Electrode with Contoured Face, U.S. Patent Application Publication No. US 2008/0078749, April 3, 2008.
14. ASTM Standard E557-10, Standard Test Method for Shear Testing of Thin Aluminum Alloy Products, ASTM International, West Conshohocken, PA, U.S.A., 2010.
15. GOM mbH, 2008, Aramis-Deformation Measurement Using the Grating Method, User’s Manual, V6.02, Braunschweig, Germany.
16. Kang · Acta Mater. · 2006 · 54 · 20910.1016/j.actamat.2005.08.045 ↗
17. Kaufman · 2000