journal article·2008-02

Failure maps for rectangular 17-4PH stainless steel sandwiched foam panels

S.V. Raj, L.J. Ghosn

Materials Science and Engineering: A· Volume 474· Issue 1-2
Publisher page

Abstract

A new and innovative concept is proposed for designing lightweight fan blades for aircraft engines using commercially available 17-4PH precipitation hardened stainless steel. Rotating fan blades in aircraft engines experience a complex loading state consisting of combinations of centrifugal, distributed pressure and torsional loads. Theoretical failure plastic collapse maps, showing plots of the foam relative density versus face sheet thickness, t, normalized by the fan blade span length, L, have been generated for rectangular 17-4PH sandwiched foam panels under these three loading modes assuming three failure plastic collapse modes. These maps show that the 17-4PH sandwiched foam panels can fail by either the yielding of the face sheets, yielding of the foam core or wrinkling of the face sheets depending on foam relative density, the magnitude of t/L and the loading mode. The design envelop of a generic fan blade is superimposed on the maps to provide valuable insights on the probable failure modes in a sandwiched foam fan blade.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Mechanical Behavior of Composites · Tribology and Lubrication Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Huang · Acta Mater. · 1996 · 44 · 28910.1016/1359-6454(95)00170-4 ↗
2. Gibson · 1997
3. Grenestedt · J. Mech. Phys. Solids · 1998 · 46 · 2910.1016/S0022-5096(97)00035-5 ↗
4. A.G. Evans, J.W. Hutchinson, M.F. Ashby, Prog. Mater. Sci. 43 (1999) 171–221.10.1016/S0079-6425(98)00004-8 ↗
5. Harte · Adv. Eng. Mater. · 2000 · 2 · 21910.1002/(SICI)1527-2648(200004)2:4<219::AID-ADEM219>3.0.CO;2-# ↗
6. Ashby · 2000
7. Wallach · Int. J. Solids Struct. · 2001 · 38 · 718110.1016/S0020-7683(00)00400-5 ↗
8. Markaki · Acta Mater. · 2001 · 49 · 167710.1016/S1359-6454(01)00072-6 ↗
9. Markaki · Acta Mater. · 2003 · 51 · 134110.1016/S1359-6454(02)00528-1 ↗
10. Markaki · Acta Mater. · 2003 · 51 · 135110.1016/S1359-6454(02)00529-3 ↗
11. Gdoutos · Mech. Mater. · 2003 · 35 · 51110.1016/S0167-6636(02)00267-3 ↗
12. Kesler · Mater. Sci. Eng. A · 2003 · 341 · 26410.1016/S0921-5093(02)00239-3 ↗
13. Harders · Acta Mater. · 2005 · 53 · 133510.1016/j.actamat.2004.11.025 ↗
14. Grenestedt · J. Mater. Sci. · 2005 · 40 · 585310.1007/s10853-005-5019-4 ↗
15. Luxner · J. Mater. Sci. · 2005 · 40 · 585910.1007/s10853-005-5020-y ↗
16. Zurob · J. Mater. Sci. · 2005 · 40 · 589310.1007/s10853-005-5031-8 ↗
17. Forest · J. Mater. Sci. · 2005 · 40 · 590310.1007/s10853-005-5041-6 ↗
18. Tekoglu · J. Mater. Sci. · 2005 · 40 · 591110.1007/s10853-005-5042-5 ↗
19. Rongong · 2004
20. Conde · Scripta Mater. · 2006 · 54 · 53910.1016/j.scriptamat.2005.10.050 ↗
21. Banhart · Prog. Mater. Sci. · 2001 · 46 · 55910.1016/S0079-6425(00)00002-5 ↗
22. Shirzadi · Sci. Technol. Weld. Join. · 2004 · 9 · 27710.1179/136217104225012210 ↗
23. Salimon · J. Mater. Sci. · 2005 · 40 · 579310.1007/s10853-005-4993-x ↗
24. S.J. Mullen, US Patent 4,632,862 (1986).
25. J.F. Newton, T.D. Martin, N. Willard, D.J. Carbery, R. Ikegami, US Patent 5,445,861 (1995).
26. Raj · 2005
27. Raj · Mater. Sci. Eng. · 2007 · 456 · 30510.1016/j.msea.2006.11.142 ↗
28. Frost · 1982
29. Gandhi · Acta Metall. · 1979 · 27 · 156510.1016/0001-6160(79)90042-7 ↗
30. 1996
31. 2002
32. 17-4PH Stainless Steel Product Data Sheet, http://www.aksteel.com/pdf/markets_products/Stainless/precipitation/17-4_PH_Data_Sheet.pdf, AK Steel Corp., Middletown, OH, 2004.
33. Metallic Materials Properties Development and Standardization (MMPDS), Chapter 2.6.9, U.S. Department of Transportation, Knovel Library, http://www.knovel.com/knovel2/.jsp?BookID=1083&VerticalID=0, pp. 2-195–2-212, 2003.