Compressive plastic deformation of an AS21X magnesium alloy produced by high pressure die casting at elevated temperatures
Source abstract
Abstract
Abstract The hot deformation behaviour of an Mg–Al–Si–RE (RE=rare earth) alloy produced by high pressure die casting has been investigated by means of compression tests in the temperature and strain rate ranges of 125–300 °C and 10 −5 to 10 −1 s −1 . The samples were deformed in the high pressure die casting state or after an exposure at 415 °C for 2 h (solution temperature) to evaluate any different response to deformation. A premature fracture at 45° with respect to the compression axis was observed in samples strained at low temperatures and high strain rates. The stress–strain curves exhibit the trend typical of materials in which deformation is recovery-controlled in the high Z regime ( Z is the Zener–Hollomon parameter), while at low strain rates and high T , the flow curves exhibit a softening typical of recrystallisation phenomena. Constitutive parameters were evaluated in order to understand the microstructure better. Light microscopy analysis has been performed to correlate the microstructure to the deformation parameters in all the tested conditions. Microstructural investigations indicate the presence of recovery mechanisms at high Z and recrystallisation during deformation in the low strain rate-high temperature regime.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Friedrich · J. Mater. Process. Technol. · 2001 · 117 · 27610.1016/S0924-0136(01)00780-4 ↗
2. Mordike · Mater. Sci. Eng. · 2001 · A302 · 3710.1016/S0921-5093(00)01351-4 ↗
3. Takuda · J. Mater. Process. Technol. · 1998 · 80–81 · 51310.1016/S0924-0136(98)00154-X ↗
4. Mwembela · Scripta Mater. · 1997 · 37 · 178910.1016/S1359-6462(97)00344-8 ↗
5. Mathis · Mater. Sci. Eng. · 2002 · A324 · 14110.1016/S0921-5093(01)01296-5 ↗
6. Zhang · Scripta Mater. · 1998 · 39 · 4510.1016/S1359-6462(98)00122-5 ↗
7. Blum · Zei. Metallkd. · 1997 · 88 · 636
8. W. Blum, F. Breutinger, B. Watzinger, J. Kroc, P. Weidinger, R. Rosch, in: E. Aghion, D. Eliezer (Eds.), Magnesium 97, Proceedings of the First Inter-Israel International Conference on Magnesium Science and Technology, Beer-Sheva, Israel, 1997, 151–156.
9. Lövold · Z. Metallkd. · 1976 · 67 · 514
10. Liu –Ying Wei, Kun Wei, Ketil Pettersen, The intergranular microstructures of AS21 and rare earth modified AS21X, ISSN 1402-1528/ISRN LTU-FR—00/09—SE/NR 2000:09, Luleå University of Tecnology, Sweden, 2000.
11. Bronfin · Mater. Sci. Eng. · 2001 · A302 · 4610.1016/S0921-5093(00)01352-6 ↗
12. Dahle · Acta Mater. · 1999 · 47 · 3110.1016/S1359-6454(98)00342-5 ↗
13. S. Sannes, H. Westengen, in: B.L. Mordike, K.V. Kainer (Eds.), Magnesium Alloys and Their Applications, Werkstoff Information-Gesselschaft, Frankfurt, 1998.
14. Cerri · Mater. Lett. · 2002 · 56 · 71610.1016/S0167-577X(02)00601-8 ↗
15. G. Dieter, Mechanical Metallurgy, third ed., McGraw-Hill, New York, 1986.
16. Myshlyaev · Mater. Sci. Eng. · 2002 · A337 · 12110.1016/S0921-5093(02)00007-2 ↗
17. Klimanek · Mater. Sci. Eng. · 2002 · A324 · 14510.1016/S0921-5093(01)01297-7 ↗