The role of aluminum oxide particulate reinforcements on cyclic fatigue and final fracture behavior of a novel magnesium alloy
Source abstract
Abstract
Abstract In this research paper, the microstructure, hardness, tensile properties, tensile fracture, cyclic stress amplitude fatigue response and final fracture behavior of a novel magnesium alloy, denoted as AZ(12)1, discontinuously reinforced with nano-particulates of aluminum oxide (Al 2 O 3 ) is neatly presented and convincingly discussed. The matrix alloy, which had three weight percent more aluminum than the monolithic counterpart (AZ91), was produced by solidification processing followed by hot extrusion. Properties spanning microhardness, tensile, high cycle fatigue and fracture behavior of the discontinuously reinforced magnesium alloy (AZ(12)1) are compared with the unreinforced monolithic alloy (AZ91). The elastic modulus, yield strength, tensile strength of the reinforced magnesium alloy is marginally higher than the unreinforced counterpart. The ductility quantified by elongation to failure over 0.5 in. (12.7 mm) gage length of the test specimen and reduction in specimen cross-section area of the composite was noticeably lower than the monolithic counterpart. At the fine microscopic level both tensile fracture and cyclic fatigue fracture of the composite revealed fewer features reminiscent of the occurrence of locally ductile mechanisms when compared with the monolithic counterpart. Over a range of maximum stress and at two different load ratios the cyclic fatigue resistance of the composite was noticeably inferior to the monolithic counterpart. The key mechanisms responsible for the inferior cyclic fatigue life and fracture resistance of the composite microstructure are elucidated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Srivatsan · Journal of Materials Science · 1992 · 27 · 596510.1007/BF01133739 ↗
2. Srivatsan · Progress in Materials Science: An International Review Journal · 1995 · 39 · 31710.1016/0079-6425(95)00003-8 ↗
3. Askeland · 2011
4. Gupta · 2011
5. Avedesian · 1999 · vol. 2
6. Dragolich · 1995
7. Becker · 2003
8. Busk · 1990 · vol. 2
9. Trojanová · 2011
10. Mikucki · 1990
11. Paramsothy · Journal of Alloy and Composites · 2011 · 509 · 757210.1016/j.jallcom.2011.04.120 ↗
12. Paramsothy · Materials Science and Engineering A · 2011 · 528 · 654510.1016/j.msea.2011.05.003 ↗
13. Zhong · Acta Materialia · 2007 · 55 · 633810.1016/j.actamat.2007.07.039 ↗
14. Deng · Journal of Alloys and Compounds · 2010 · 504 · 54210.1016/j.jallcom.2010.05.159 ↗
15. Wang · Transactions Non-ferrous Metals Society of China · 2006 · 16 · 89210.1016/S1003-6326(06)60346-4 ↗
16. Ochi · Materials Science and Engineering A · 2007 · 468–470 · 23010.1016/j.msea.2006.09.122 ↗
17. Llorca · Materials Science and Engineering A · 1991 · 135 · 24710.1016/0921-5093(91)90571-4 ↗
18. A. Bag, W. Zhou, D. Taplin, E.S. Dwarakadasa, in: H.I. Kaplan, J.N. Hryn, B.B. Clow (Eds.), Magnesium Technology 2000, ASM International, Materials Park, Ohio, USA, March 2000, pp. 345–348.10.1002/9781118808962.ch48 ↗
19. Srivatsan · Composites: Part B · 2005 · 36 · 20910.1016/j.compositesb.2004.09.004 ↗
20. Riehemann · Procedia Engineering · 2010 · 2 · 215110.1016/j.proeng.2010.03.231 ↗
21. Mielczarek · Materials Science and Engineering A · 2007 · 462 · 23010.1016/j.msea.2005.11.087 ↗
22. Tham · Materials Science and Technology · 1999 · 15 · 113910.1179/026708399101505185 ↗
23. Gupta · Journal of Alloys and Compounds · 1997 · 260 · 25010.1016/S0925-8388(97)00156-4 ↗
24. Gupta · Journal of Materials Engineering and Performance · 1999 · 8 · 47310.1361/105994999770346792 ↗
25. Ling · Aluminum Transactions: An International Journal · 2000 · 2 · 209
26. Ganesh · Journal of Recent Research Developments in Materials Science and Engineering · 2002 · 119
27. Hassan · Journal of Materials Science · 2006 · 41 · 222910.1007/s10853-006-7178-3 ↗
28. Moll · 2002 · 197
29. Starke · 1979
30. Chen · Materials Science and Engineering A · 2008 · 483–484 · 11310.1016/j.msea.2006.10.199 ↗
31. Srivatsan · Metallurgical and Materials Transactions · 2000 · 31A · 95910.1007/s11661-000-1014-1 ↗