Defect based micromechanical modelling and simulation of nanoSPD CP-Ti in post-deformation
Source abstract
Abstract
The paper concerns the dislocation based modelling and simulation of room temperature post-compression hardening after warm equal channel angular processing (ECAP) of grade 2 CP-Ti. The post-deformation behaviour is well simulated by the Zehetbauer model which already succeeded in describing the evolution of strength and structural parameters during conventional and severe plastic deformation. The model yields excellent fits to the experimental post-compression hardening characteristics (stages II, III and IV) as well as to the evolution of dislocation density. The physical quantities involved in the resulting fit parameters take reasonable values. In particular, the calculations yield a satisfactory agreement with the experimentally gained data of the cell size and the concentration of lattice vacancies, as it is shown by comparisons with X-ray profile investigations and measurements of residual electrical resistivity. As a difference to previous modelling of large strain hardening, edge dislocation density saturates at smaller strains than screw density which seems to be a consequence of the much finer initial grain structure and of the elevated ECAP deformation temperature. Œ 2005 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Baik · 2004 · 233
2. Enikeev · 2004 · 245
3. Zehetbauer · Adv. Eng. Mater. · 2003 · 5 · 33010.1002/adem.200310090 ↗
4. M. Zehetbauer, R.Z. Valiev (Eds.), Nanomaterials by Severe Plastic Deformation, Vienna (Austria), Wiley/VCH, Weinheim, Germany, 2004, p. 435.10.1002/3527602461 ↗
5. Zehetbauer · J. Alloys Compd. · 2004 · 378 · 32910.1016/j.jallcom.2004.01.039 ↗
6. M. Zehetbauer, L. Zeipper, E. Schafler, in: Y.T. Zhu and V. Varyukhin (Eds.), Nanostructured Materials by High-pressure Severe Plastic Deformation, NATO Science Series II: Mathematics, Physics and Chemistry vol. 212, 2005.
7. Zehetbauer · Acta Metall. Mater. · 1993 · 41 · 58910.1016/0956-7151(93)90089-B ↗
8. Conrad · Progr. Mater. Sci. · 1981 · 26 · 12310.1016/0079-6425(81)90001-3 ↗
9. Les · Key Eng. Mater. · 1994 · 97–98 · 33510.4028/www.scientific.net/KEM.97-98.335 ↗
10. L. Zeipper, Defect Based Micromechanics of NanoSPD-titanium Deformation – Experiments, Modelling & Simulations, PhD Thesis, University of Vienna, Austria, 2004.
11. Yu.R. Kolobov, G.P. Grabovetskaya, K.V. Ivanov, R.Z. Valiev, Y.T. Zhu, in: Y.T. Zhu, T.G. Langdon, R.Z. Valiev, S.L. Semiatin, D.H. Shin, T.C. Lowe (Eds.), Ultrafine Grained Materials III, TMS Annual Meeting, Charlotte, North Carolina, USA, TMS, Warreudale, PA, USA, 2004, p. 621.
12. Raabe · 1998
13. L. Zeipper, G. Gemeinboeck, M. Zehetbauer, G. Korb, in: Y.T. Zhu, T.G. Langdon, R.Z. Valiev, S.L. Semiatin, D.H. Shin, T.C. Lowe (Eds.), Ultrafine Grained Materials III, TMS Annual Meeting, Charlotte, North Carolina, USA, TMS Warreudale, PA, USA, 2004, p. 541.
14. Zehetbauer · Phys. Stat. Sol. A · 1995 · 151 · 30510.1002/pssa.2211510206 ↗
15. Toth · J. Eng. Mater. Tech. · 2002 · 124 · 7110.1115/1.1421350 ↗
16. J. De Messemaker, B. Verlinden, J. Van Humbeeck, in: Y.T. Zhu, T.G. Langdon, R.Z. Valiev, S.L. Semiatin, D.H. Shin, T.C. Lowe (Eds.), Ultrafine Grained Materials III, TMS Annual Meeting, Charlotte, North Carolina, USA, TMS, 2004, p. 595.
17. Zhu · J. Mater. Res. · 2003 · 18 · 190810.1557/JMR.2003.0267 ↗
18. Mughrabi · Acta Metall. · 1983 · 31 · 136710.1016/0001-6160(83)90007-X ↗
19. E. Schafler, K. Nyilas, S. Bernstorff, L. Zeipper, M. Zehetbauer, T. Ungar, Z. Kristallogr., in press.
20. Köppers · Acta Mater. · 1997 · 45 · 418110.1016/S1359-6454(97)00078-5 ↗
21. Kocer · Mater. Sci. Forum · 1996 · 210–213 · 13310.4028/www.scientific.net/MSF.210-213.133 ↗