journal article·2009-06

Mechanical and microstructural observations during compression creep of a short fiber reinforced AlMg metal matrix composite

J. Olbricht, A. Yawny, M.L. Young, G. Eggeler

Publisher page

Abstract

Abstract The constant load compression creep behavior of a short fiber reinforced aluminium-5 wt.% magnesium alloy (AlMg5) containing 15 vol.% Al 2 O 3 fibers (Saffil) was investigated. Creep of the matrix alloy and the metal matrix composite (MMC) was studied at 300 °C and 500 °C. Stresses ranging from 10 MPa to 120 MPa result in minimum creep rates between 10 −9 s −1 and 10 −3 s −1 . MMC creep is characterized by an initial decrease of the creep rate before a distinct creep rate minimum is reached, while the matrix alloy shows increasing primary creep rates at 500 °C. It is difficult to rationalize the stress dependence of the minimum creep rates by a simple Norton law, because the stress exponent n is not always constant. The orientation of Al 2 O 3 fibers with respect to the loading axis is found to affect minimum creep rates. Fiber breakage represents an important damage mechanism. Fiber agglomerates are observed in the initial microstructure which may well affect the entire process of creep.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Dragone · Acta Metall. Mater. · 1992 · 40 · 278110.1016/0956-7151(92)90348-I ↗
2. Eggeler · 2001 · vol. 2 · 1757
3. Eggeler · Z. Metallkd. · 1994 · 85 · 39
4. Cadek · Mater. Sci. Eng. A · 1995 · 190 · 910.1016/0921-5093(94)09605-V ↗
5. Eggeler · Scripta Mater. · 1998 · 38 · 34110.1016/S1359-6462(97)00481-8 ↗
6. Dlouhy · Acta Metall. Mater. · 1993 · 41 · 324510.1016/0956-7151(93)90054-V ↗
7. Kausträter · Mater. Sci. Eng. A · 2001 · 319–321 · 71610.1016/S0921-5093(01)01016-4 ↗
8. A. Yawny, G. Kausträter, R. Valek, J. Schürhoff, B. Skrotzki, G. Eggeler, B. Stöckhert, in: J.D. Parker (Ed.), Creep & Fracture of Engineering Materials & Structures (Proceedings of the 9th International Conference held in Swansea, April 1–4, 2001), The Institute of Materials, London, UK, 2001, pp. 219–228.
9. Dlouhy · Acta Metall. Mater. · 1995 · 43 · 53510.1016/0956-7151(94)00255-G ↗
10. Dieter · 1988
11. Li · Met. Mater. Trans. · 1998 · 29A · 252310.1007/s11661-998-0224-9 ↗
12. Li · Acta Mater. · 1999 · 47 · 339510.1016/S1359-6454(99)00219-0 ↗
13. Yawny · Mater. Sci. Eng. A · 2004 · 387–389 · 90510.1016/j.msea.2003.12.083 ↗
14. Kausträter · Prakt. Met. · 2000 · 37 · 619
15. Dlouhy · Prakt. Met. · 1993 · 30 · 172
16. Yawny · 2002 · 237
17. W.D. Nix, B. Ilschner, in: P. Haasen (Ed.), Proceedings of ICSMA 5, Pergamon Press, Toronto, Canada, 1980, pp. 1503–1530.10.1016/B978-1-4832-8412-5.50243-5 ↗
18. Yawny · Scripta Mater. · 2002 · 46 · 83710.1016/S1359-6462(02)00045-3 ↗