Microstructure of under-cooled Sn–Bi and Al–Si alloys
Source abstract
Abstract
Abstract Rapid Solidification Processing (RSP), of metals and alloys, is established by increasing the under-cooling by applying high cooling rates (10 2 to 10 6 K/s) or by reducing the nucleation sites using low cooling rates (1 K/s). Melt under-cooling opens new solidification pathways for new non-equilibrium phases and unusual microstructures. Several techniques have been developed to reduce the nucleation sites and produce increased under-cooling in metals and alloys including the fluxing technique. The aim of this paper is to study the influence of the under-cooling level on microstructures of Sn–Bi and Al–Si alloys by using the fluxing technique. Increasing the under-cooling of the molten Sn–Bi alloys in the range of 11 K, lead to a refinement of the primary phase and eutectic constituent. However, for the molten Al–Si alloys, the increase of under-cooling, in the range of 25 K, led to no microstructure change. This is probably because sufficient under-cooling values were not obtained to produce rapid solidification in Al–Si alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Perepezko · ISIJ Int · 1995 · 35 · 58010.2355/isijinternational.35.580 ↗
2. Wang · Mater. Sci. Eng. A · 2001 · 307 · 8010.1016/S0921-5093(00)01954-7 ↗
3. Kelton · Solid State Phy · 1991 · 45 · 7510.1016/S0081-1947(08)60144-7 ↗
4. Kurtz · Mater. Sci. Eng. A · 1994 · 179–180 · 4610.1016/0921-5093(94)90162-7 ↗
5. Kene · Acta Metall · 1966 · 14 · 60510.1016/0001-6160(66)90068-X ↗
6. J.H. Perepezko, D.H. Rasmussen, I.E. Anderson, C.R. Lopes Jr., in: Proceedings of the International Conference on Solidification, Vol 1, 1977, p. 169
7. Hansen · Calphad · 2000 · 24 · 33910.1016/S0364-5916(01)00009-8 ↗
8. Castro · Mater. Sci. Eng. A · 2001 · 304–306 · 25510.1016/S0921-5093(00)01519-7 ↗
9. Wei · Mater. Sci. Eng. A · 1997 · 226–228 · 1150
10. W.B. Castro, M.F. Oliveira, C.S. Kiminami, R. Caram, in: Proceedings of the Fourth Decennial International Conference on Solidification Processing, Vol. 1, Sheffield, UK, 1997, p. 485
11. Goetzinger · Acta Materialia · 1998 · 46 · 164710.1016/S1359-6454(97)00339-X ↗
12. Moir · Acta Materialia · 1998 · 46 · 402910.1016/S1359-6454(98)00057-3 ↗
13. Wang · Scripta Materialia · 1999 · 41 · 95910.1016/S1359-6462(99)00246-8 ↗
14. Herlach · Mater. Sci. Eng. A · 2001 · 304–306 · 2010.1016/S0921-5093(00)01553-7 ↗
15. Abbaschian · Mater. Sci. Eng. A · 1997 · 226–228 · 1310.1016/S0921-5093(97)80022-6 ↗
16. Hunt · Trans. Metall. Soc. AIME · 1967 · 239 · 864
17. Sun · Physica B · 1997 · 240 · 20510.1016/S0921-4526(97)00425-0 ↗
18. Gremaud · Acta Materialia · 1996 · 44 · 266910.1016/1359-6454(95)00393-2 ↗
19. Herlach · Mater. Sci. Eng · 1994 · R12 · 17710.1016/0927-796X(94)90011-6 ↗
20. D.M Herlach, W. Bender, A. Garcia-Escorial, L. Granasy, A.L. Greer, M. Kolb, W. Kurz, W. Löser, A. Ludwing, P.R. Sahm, B. Vinet, in: Proceedings of the Second European Symposium on the Utilization of the International Space Station, Vol. 1, The Netherlands, 1998, p. 315
21. J.L. Walker, Trans. AIME (1961) 845.10.1038/190845a0 ↗
22. Li · Acta Materialia · 2002 · 50 · 179710.1016/S1359-6454(02)00032-0 ↗