journal article·2000-09

Micro-residual stresses caused by deformation, heat, or their combination during friction welding

H Behnken, V Hauk

Materials Science and Engineering: A· Volume 289· Issue 1-2
Publisher page

Abstract

Abstract The influences of mechanical and thermal treatments on the macro- and microstresses in two-phase materials were investigated. On samples of an austenitic–ferritic duplex steel the alterations of micro-residual stresses caused by different parameters of material treatments, e.g. deformation rate, deformation temperature, tempering, cooling rates were studied. The friction welding procedure is an example of the combination of all these mechanical and thermal parameters. Its effects on macro- and microstresses were investigated on friction welded joints of a quenched and tempered low alloyed steel, of a duplex steel and on joints between both steels. The distributions of macro- and micro-residual stresses were determined versus the distance from the welding zone and from the surface using X-ray and neutron diffraction. Strain measurements on the compact specimens and on thin plates as well as measurements on both phases allow to separate between macro- and microstresses. Both kinds show up with pronounced profiles. The results reveal that microstresses should not be neglected in the assessments of X-ray results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Macherauch · Härterei-Tech. Mitt. · 1973 · 28 · 201
2. E. Macherauch, K.H. Kloos, Mat.-wiss. u. Werkstofftech. 20 (1989) 1–13, 53–60 and 82–91.10.1002/mawe.19890200104 ↗
3. Noyan · Mater. Sci. Eng. · 1986 · 79 · 14910.1016/0025-5416(86)90398-8 ↗
4. Hauk · 1989 · 895
5. Hauk · 1990 · 173
6. N. Ji, J.L. Lebrun, private communication, presented at the meeeting of the German and Dutch task groups on residual stresses, Twente, NL, 20./21.3.91.
7. Winholtz · Mater. Sci. Eng. A · 1992 · 154 · 15510.1016/0921-5093(92)90341-W ↗
8. Behnken · 1993 · 733
9. Behnken · 1991 · 141
10. H. Behnken, V. Hauk, in: Proceedings of the Fourth European Conference on Residual Stresses, Cluny 1996, pp. 981–988.
11. Hauk · 1997
12. Scholtes · 1991
13. B. Scholtes, in: V. Hauk, Structural and Residual Stress Analysis by Nondestructive Methods, Elsevier, Amsterdam, 1997, pp. 590–636.10.1016/B978-044482476-9/50020-7 ↗
14. Wohlfahrt · 1983 · 1 · 85
15. R.H. Leggatt, in: The Fifth International Conference on Residual Stresses, ICRS-5, Linköping, 1997, pp. 12–25.
16. Hauk · Härterei-Tech. Mitt. · 1990 · 45 · 85
17. Behnken · 1993 · 165
18. H. Behnken, V. Hauk, in: Berlin Neutron Scattering Center (BENC), Experimental Reports, 1993, pp. 126–127 and 1994, pp. 238–239.
19. H. Behnken, V. Hauk, in: Proceedings of the Fourth International Conference on Residual Stresses ICRS4, Soc. Exp. Mechanics, 1994, pp. 382–391.
20. Behnken · 1999 · 345
21. Hirsch · Härterei-Tech. Mitt. · 1999 · 54 · 94
22. J.W. Elmer, D.D. Kautz, in: Welding, Brazing, and Soldering, ASM Handbook, Vol. 6, 1994, pp. 150–155. (The friction weldings were performed by the Zentralabteilung Allgemeine Technologie, KFA Jülich).10.31399/asm.hb.v06.a0001349 ↗
23. The Thyssen Edelstahlwerke AG, Krefeld, provided the rods and sheets of the duplex-steel material.
24. Thyssen Edelstahlwerke AG, Remanit Werkstoffblätter, Kaltbreitband Erzeugnisse, Druckschrift 1127/10, 1986.
25. Mannesmannröhren-Werke, Werkstoffblatt 144 R, Dez. 1977.
26. W. Reimers, Ch. Genzel, Hahn-Meitner-Institut Berlin, provided the neutron measurements.
27. H. Behnken, V. Hauk, in: Proceedings of the Ninth International Conference on Mechanical Behaviour, Copenhagen, 3, 1990, pp. 1217–1226.
28. Blumenauer · Wiss. Z. TU Dresden · 1970 · 19 · 591
29. Bollenrath · Arch. Eisenhüttenwesen · 1970 · 41 · 44510.1002/srin.197001626 ↗
30. W. Klein, Mechanische und röntgenographischen Untersuchungen zum Biegeverformungsverhalten unlegierter Stähle bei Raumtemperatur. Doctorate-thesis, Universität Karlsruhe, 1978.
31. V. Hauk, P.J.T. Stuitje, Z. Metallkd. 76 (1985) 445–451 and 471–474.
32. J. Johansson, M. Odén and X.-H. Zeng, in: The Fifth European Conference on Residual Stresses ECRS5, Noordwijkerhout, NL, Sept. 1999, and Acta. Mater. 47 (1999) 2669–2684.
33. Pohl · Z. Metallkd. · 1999 · 90 · 551