journal article·2017-11

Atomic behaviors of crack propagation in bcc iron under dynamic loading rate with rectangular fluctuation

Zhifu Zhao, Fulei Chu

Publisher page

Abstract

Abstract This work carries out molecular dynamics simulations to identify the atomic behaviors of the crack initiation and propagation in bcc iron under dynamic loading rate with rectangular fluctuation, where the effects of the upload ratio and contact ratio are revealed. With an increase in upload ratio or a decrease in contact ratio, the plastic behaviors of the crack initiation can transform from only the nucleation of the dislocations to both the dislocation nucleation and the phase transitions. The corresponding behaviors of the crack propagation can transform from only the dislocation emission to both of the emission of the dislocations and the expansions of the stacking faults and twins. The plastic behaviors of the crack initiation and propagation are determined by the stress field around the crack tip. To describe the stress field, the Virial stress tensor and Voronoi volume are introduced. Besides, the simulations and Virial stress are verified through comparing with the results obtained by the continuum mechanics. Since the rectangular loading rate is the typical characteristic of the load applied on the upper part of the tooth root with gear transmission, this work can be used to analyze the atomic mechanisms of the initiation of the gear tooth breakage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Effects of ring-planet mesh phasing and contact ratio on the parametric instabilities of a planetary gear ring10.1115/1.2803716 ↗
2. Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth10.1016/j.engfailanal.2011.07.006 ↗
3. Li · 1997
4. Molecular dynamics simulation of influence of grain boundary on near-threshold fatigue crack growth
5. Influence of crack orientation on the ductile–brittle behavior in Fe–3wt% Si single crystals10.1016/j.matchar.2006.09.001 ↗
6. Crack orientation versus ductile-brittle behavior in 3D atomistic simulations
7. Atomic mechanism and prediction of hydrogen embrittlement in iron10.1038/nmat3479 ↗
8. Three-dimensional crack initiation mechanisms in bcc-Fe under loading modes I, II and III10.1016/j.msea.2012.09.071 ↗
9. J.Y. Shi, L. Peng, M.Y. Ye, F. Gao, Defect effects on grain boundary strength in Fe: A molecular dynamics simulation, in: IEEE Proceedings of the 26th Symposium on Fusion Engineering (SOFE), 2015, pp. 1–4.10.1109/SOFE.2015.7482329 ↗
10. Dynamic overshoot in α-iron by atomistic simulations10.1088/0965-0393/6/5/002 ↗
11. Molecular dynamics simulation of crack growth under cyclic loading10.1016/j.commatsci.2004.03.009 ↗
12. 3D atomistic simulation of fatigue behavior of a ductile crack in bcc iron10.1016/j.ijfatigue.2011.02.011 ↗
13. 3D atomistic simulation of fatigue behavior of a ductile crack in bcc iron loaded in mode II10.1016/j.commatsci.2012.03.045 ↗
14. Molecular dynamics simulation of fatigue crack propagation in bcc iron under cyclic loading10.1016/j.ijfatigue.2014.04.010 ↗
15. Accelerated molecular dynamics simulations for characterizing plastic deformation in crystalline materials with cracks10.1016/j.commatsci.2016.04.026 ↗
16. Molecular dynamics based study and characterization of deformation mechanisms near a crack in a crystalline material10.1016/j.jmps.2013.04.004 ↗
17. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
18. Visualization and analysis of atomistic simulation data with OVITO–the open visualization tool10.1088/0965-0393/18/1/015012 ↗
19. A simple empirical N-body potential for transition metals10.1080/01418618408244210 ↗
20. Development of new interatomic potentials appropriate for crystalline and liquid iron10.1080/14786430310001613264 ↗
21. A computer simulation method for the calculation of equilibrium constants for the formation of physical clusters of molecules: application to small water clusters10.1063/1.442716 ↗
22. Pressure tensor of partial-charge and point-dipole lattices with bulk and surface geometries10.1103/PhysRevB.49.755 ↗
23. General formulation of pressure and stress tensor for arbitrary many-body interaction potentials under periodic boundary conditions10.1063/1.3245303 ↗
24. P.S. Symonds, Survey of methods of analysis of plastic deformation of structures under dynamic loading, Brown University, Division of Engineering Report BU/NSRDC/1-67, 1967.10.21236/AD0659972 ↗
25. Sih · 1977 · 4
26. 1988 · 1 · 67
27. Effect of welded mechanical heterogeneity on local stress and strain ahead of stationary and growing crack tips10.1016/j.nucengdes.2008.12.024 ↗
28. G.R. Irwin, Plastic zone near a crack tip and fracture toughness, in: Proceedings of the Seventh Sagamore Ordnance Material Conference, 4, 1960, pp. 63–78.