journal article·2017-01

Fatigue behavior of aged and solution treated AZ61 Mg alloy at small length scale using nanoindentation

Shubhra Jain, Aditya Gokhale, Jayant Jain, Sudhanshu S. Singh, Krishnaswamy Hariharan

Publisher page

Abstract

Abstract Nano indentation low cycle fatigue test has been performed in AZ61 Mg alloy to study the effect of cyclic loading. The cyclic load-depth curves are observed in aged and solution treated conditions. An indentation fatigue depth propagation law is used to analyze the cyclic behavior of the alloy. The increase in steady state depth propagation rate with increasing stress intensity has been reported which is qualitatively similar to the steady state growth rate of a fatigue crack. It has been found that the depth and depth propagation rate have different values in solution treated and aged condition under the same loading parameters. The results are analyzed by considering the role of slip and twinning in the deformation of solution treated and aged conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Lazan · 1954
2. Wu · Mater. Sci. Eng. A · 2012 · 556 · 27810.1016/j.msea.2012.06.088 ↗
3. Agnew · Int. J. Plast. · 2005 · 21 · 116110.1016/j.ijplas.2004.05.018 ↗
4. Wu · Acta Mater. · 2008 · 56 · 369910.1016/j.actamat.2008.04.006 ↗
5. Lin · Mater. Sci. Eng. A · 2013 · 573 · 23410.1016/j.msea.2013.03.004 ↗
6. Lin · J. Alloy. Compd. · 2011 · 509 · 683810.1016/j.jallcom.2011.03.129 ↗
7. Lin · Int. J. Fatigue · 2013 · 48 · 12210.1016/j.ijfatigue.2012.10.010 ↗
8. Lin · Comput. Mater. Sci. · 2013 · 73 · 12810.1016/j.commatsci.2013.02.023 ↗
9. Jordon · Mater. Sci. Eng. A · 2011 · 528 · 686010.1016/j.msea.2011.05.047 ↗
10. Uematsu · Mater. Sci. Eng. A · 2009 · 517 · 13810.1016/j.msea.2009.03.066 ↗
11. Xu · Philos. Mag. Lett. · 2010 · 90 · 31310.1080/09500831003662495 ↗
12. Li · Mater. Sci. Eng. A · 2002 · 322 · 2310.1016/S0921-5093(01)01116-9 ↗
13. Xu · J. Mater. Res. · 2006 · 21 · 710.1557/jmr.2006.0222 ↗
14. Xu · Mech. Mater. · 2007 · 39 · 106610.1016/j.mechmat.2007.06.001 ↗
15. Xu · Scr. Mater. · 2009 · 60 · 85410.1016/j.scriptamat.2009.01.027 ↗
16. Faisal · Surf. Coat. Tech. · 2014 · 242 · 4210.1016/j.surfcoat.2014.01.015 ↗
17. Skrzypczak · J. Eur. Ceram. Soc. · 2009 · 29 · 102110.1016/j.jeurceramsoc.2008.07.066 ↗
18. Nautiyal · Mater. Sci. Eng. A · 2016 · 650 · 18310.1016/j.msea.2015.10.040 ↗
19. Abrams, Metallography, vol. 4, 1971, p. 59.10.1016/0026-0800(71)90005-X ↗
20. Fischer-Cripps · 2002
21. Bodhankar · J. Mater. Sci. Surface Eng. · 2015 · 2 · 1
22. Ritchie · Int. J. Fract. · 1999 · 100 · 5510.1023/A:1018655917051 ↗
23. Pugno · J. Mech. Phys. Solids · 2006 · 54 · 133310.1016/j.jmps.2006.01.007 ↗
24. Bernard · Int. J. Fatigue · 2013 · 52 · 2010.1016/j.ijfatigue.2013.02.015 ↗
25. Chen · J. Alloy. Compd. · 2013 · 579 · 54010.1016/j.jallcom.2013.07.049 ↗
26. Jain · Scr. Mater. · 2010 · 62 · 30110.1016/j.scriptamat.2009.11.024 ↗
27. Robson · Acta Mater. · 2011 · 59 · 194510.1016/j.actamat.2010.11.060 ↗