journal article·2013-01

Powder metallurgy Al–6Cr–2Fe–1Ti alloy prepared by melt atomisation and hot ultra-high pressure compaction

Karel Dám, Dalibor Vojtěch, Filip Průša

Publisher page

Abstract

Abstract Al6Cr2Fe1Ti alloy was prepared by melt atomisation into rapidly solidified powder. The powder was compacted using uniaxial hot compression at an ultra-high pressure (6 GPa). The samples were pressed at 300, 400 and 500 °C. The structure, mechanical properties and thermal stability were examined and compared with those of the commercially available Al12Si1Cu1Mg1Ni casting alloy, which is considered thermally stable. It was shown that the hot compression at ultra-high pressure results in a compact and pore-free material with excellent mechanical properties. The elevated pressing temperatures were found to be effective at increasing the mechanical stability after applying the ultra-high pressure. The results of thermal stability testing revealed that the mechanical properties do not change significantly at high temperature, even after 100 h of annealing at 400 °C. In addition, the Al6Cr2Fe1Ti alloy exhibited very good creep resistance. A comparison between the commercial Al12Si1Cu1Mg1Ni alloy and the powder metallurgy alloy shows that this alloy has significantly better mechanical properties and thermal stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Nagaishi · Mater. Sci. Eng. A · 2007 · 449–451 · 79410.1016/j.msea.2006.02.383 ↗
2. Galano · J. Alloys. Compd. · 2010 · 495 · 37210.1016/j.jallcom.2009.10.208 ↗
3. Inoue · Mater. Sci. Eng. A · 2000 · 286 · 110.1016/S0921-5093(00)00656-0 ↗
4. Inoue · Mater. Sci. Eng. A · 2000 · 294–296 · 72710.1016/S0921-5093(00)01307-1 ↗
5. Luo · Mater. Sci. Eng. A · 2005 · 409 · 24910.1016/j.msea.2005.06.075 ↗
6. Shaw · Scr. Mater. · 2004 · 50 · 92110.1016/j.scriptamat.2004.01.021 ↗
7. Yamasaki · Scr. Mater. · 2007 · 56 · 78510.1016/j.scriptamat.2007.01.012 ↗
8. Gargarella · Scr. Mater. · 2009 · 61 · 70910.1016/j.scriptamat.2009.06.010 ↗
9. Gubicza · Mater. Sci. Eng. A. · 2007 · 458 · 38510.1016/j.msea.2006.12.127 ↗
10. Fuentes · J. Alloys. Compd. · 2009 · 484 · 80610.1016/j.jallcom.2009.05.045 ↗
11. Cieślak · Rev. Adv. Mater. Sci. · 2008 · 18 · 425
12. Vojtěch · Mater. Charact. · 2012 · 66 · 8310.1016/j.matchar.2012.02.011 ↗
13. Galano · Acta Mater. · 2009 · 57 · 512010.1016/j.actamat.2009.07.009 ↗
14. Galano · Acta Mater. · 2009 · 57 · 510710.1016/j.actamat.2009.07.011 ↗
15. Shaw · Scr. Mater. · 2004 · 51 · 44910.1016/j.scriptamat.2003.12.033 ↗
16. Zawrah · Mater. Sci. Eng. A · 2003 · 355 · 3710.1016/S0921-5093(03)00058-3 ↗
17. Vojtěch · J. Alloys. Compd. · 2009 · 475 · 15110.1016/j.jallcom.2008.07.019 ↗
18. Inoue · Nanostruct. Mater. · 1999 · 11 · 22110.1016/S0965-9773(99)00035-5 ↗
19. Kim · J. Alloys. Compd. · 2007 · 436 · L110.1016/j.jallcom.2006.06.106 ↗
20. Vojtěch · Mater. Sci. Eng. A · 2007 · 458 · 37110.1016/j.msea.2006.12.136 ↗
21. Cavojsky · Mater. Sci. Eng. A · 2012 · 549 · 23310.1016/j.msea.2012.04.051 ↗