journal article·2001-07

Microstructure and mechanical properties of rapidly solidified Al–7wt.%Mg–X (X=Cr, Zr or Mn) alloys

D.Y. Maeng, J.H. Lee, S.I. Hong, B.S. Chun

Materials Science and Engineering: A· Volume 311· Issue 1-2
Publisher page

Abstract

Abstract In this study, the effect of the transition elements on the microstructure and mechanical properties of rapidly solidified Al–Mg–X alloys was investigated. As a result of the rapid solidification processing, fine equiaxed grains with a mean diameter of 2 μm were observed in these alloys. Many fine particles were found to be distributed rather homogeneously throughout the matrix with relatively big particles occasionally observed at grain boundaries. The ultimate tensile strengths of Al–Mg–X alloys were found to decrease rather remarkably at 150°C although the ductility was not increased, which may result from segregation of β(Al 3 Mg 2 ) precipitates. Fine dimples were observed on the fracture surfaces for all alloy systems and the variation of the size and shape of dimples was not observed. The ductility at 530°C was found to be ∼100%, suggesting that grain boundary sliding did not contribute despite fine grain size stabilization. The absence of superplastic behavior may be associated with low boundary misorientation in rapidly solidified Al–Mg–X alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. McNelley · 1993 · 45
2. B.S. Chung, D.Y. Maeng, S.I. Hong, Superplastic behavior and influence of solution hardening on the ductility of Al–Mg–X alloys, in: Third Pacific Rim International Conference on Advanced Materials and Processing, 1998, p. 1879.
3. W.F. Smith, Structure and Properties of Engineering Alloys, second ed.
4. Tan · Powder Metall. · 1986 · 29 · 14310.1179/pom.1986.29.2.143 ↗
5. Lui · Scr. Metall. · 1994 · 30 · 48710.1016/0956-716X(94)90608-4 ↗
6. Maeng · J. Korean Inst. Met. Mater. · 1998 · 36 · 494
7. Estrada · J. Mater. Sci. · 1990 · 25 · 88610.1007/BF03372176 ↗
8. D.Y. Maeng, T.S. Kim, J.H. Lee, S.J. Hong, S.K. Seo, B.S. Chun, Scr. Mater. 43 (2000) 385.10.1016/S1359-6462(00)00428-0 ↗
9. Villars · 1995
10. Petch · J. Iron Steel Inst. · 1953 · B64 · 747
11. Hong · Mater. Sci. Eng. · 1996 · A221 · 3810.1016/S0921-5093(96)10483-4 ↗
12. Hong · Acta Metall. · 1990 · 38 · 158110.1016/0956-7151(90)90126-2 ↗
13. Hong · Acta Metall. · 1993 · 41 · 233710.1016/0956-7151(93)90314-I ↗
14. Hales · Acta Metall. · 1988 · 36 · 122910.1016/0001-6160(88)90275-1 ↗
15. McNelley · Metall. Trans. · 1986 · 17A · 103510.1007/BF02661269 ↗
16. Lee · Metall. Trans. · 1986 · 17A · 104310.1007/BF02661270 ↗
17. McNelley · Scr. Metall. · 1984 · 18 · 91710.1016/0036-9748(84)90260-6 ↗