Fracture behavior of the compact tension specimens in NiTi shape memory alloys
Source abstract
Abstract
Abstract In the present work, the fracture behavior of a NiTi pseudoelastic alloy has been investigated. The fracture toughness is obtained by experiments on compact tension (CT) specimens, which are pre-cracked at a low fatigue load. The fracture toughness of the studied material is KIC = 39.4 MPa m1/2. The fracture surface of selected specimen is studied by scanning electron microscope (SEM). It is found that the fracture mechanism is dominated by cleavage fracture. With the increasing crack velocity, the fracture surface at the fast fracture regime exhibits a more brittle response. The finite element simulation on both specimens with and without pre-crack is carried out to better understand the fracture mechanisms of the NiTi alloys. It is shown that a pre-crack results in phase transformation at the crack tip under very low load. However, due to the low fatigue load and short pre-crack length, the material is always partly phase transformed, even at the crack tip, during the fatigue pre-crack process. There is always a small area around the crack tip fully transformed during the fast fracture process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Shaw · J. Mech. Phys. Solids · 1995 · 43 · 124310.1016/0022-5096(95)00024-D ↗
2. Helm · Active Mater.: Behav. Mech. · 2001 · 4333 · 302
3. Scherngell · Mater. Sci. Eng. A · 1999 · 273–275 · 40010.1016/S0921-5093(99)00306-8 ↗
4. Hane · Acta Mater. · 1999 · 47 · 260310.1016/S1359-6454(99)00143-3 ↗
5. Kim · Acta Mater. · 2004 · 52 · 48710.1016/j.actamat.2003.09.032 ↗
6. Zhang · Mater. Sci. Eng. A · 2004 · 374 · 29210.1016/j.msea.2004.03.013 ↗
7. Carroll · Scripta Mater. · 2004 · 50 · 18710.1016/j.scriptamat.2003.09.020 ↗
8. Ohba · Mater. Sci. Eng. A · 2006 · 438–440 · 48010.1016/j.msea.2006.02.167 ↗
9. Lahoz · J. Alloys Compd. · 2004 · 81 · 13010.1016/j.jallcom.2004.03.080 ↗
10. Thamburaja · Acta Mater. · 2005 · 53 · 382110.1016/j.actamat.2005.03.054 ↗
11. Frick · Acta Mater. · 2006 · 54 · 222310.1016/j.actamat.2006.01.030 ↗
12. Otsuka · Prog. Mater. Sci. · 2005 · 50 · 51110.1016/j.pmatsci.2004.10.001 ↗
13. Gall · Int. J. Fract. · 2001 · 109 · 18910.1023/A:1011069204123 ↗
14. Chen · Metall. Mater. Trans. A · 2005 · 36 · 94110.1007/s11661-005-0288-8 ↗
15. McKelvey · J. Biomed. Mater. Res. · 1999 · 47 · 30110.1002/(SICI)1097-4636(19991205)47:3<301::AID-JBM3>3.0.CO;2-H ↗
16. McKelvey · Metall. Mater. Trans. A · 2001 · 32 · 73110.1007/s11661-001-1008-7 ↗
17. Yi · Int. J. Solids Struct. · 2000 · 37 · 531510.1016/S0020-7683(99)00213-9 ↗
18. Yi · Int. J. Solids Struct. · 2001 · 38 · 446310.1016/S0020-7683(00)00283-3 ↗
19. Yan · Smart Mater. Struct. · 2002 · 11 · 94710.1088/0964-1726/11/6/316 ↗
20. Wang · Mater. Sci. Eng. A · 2006 · 434 · 26910.1016/j.msea.2006.06.077 ↗
21. Auricchio · Comput. Meth. Appl. Mech. Eng. · 1997 · 146 · 28110.1016/S0045-7825(96)01232-7 ↗
22. Wang · Mater. Sci. Eng. A · 2005 · 394 · 39310.1016/j.msea.2004.11.029 ↗
23. Lim · J. Mech. Phy. Solids · 2002 · 50 · 65110.1016/S0022-5096(01)00088-6 ↗
24. Wang · Mater. Sci. Eng. A · 2006 · 425 · 8310.1016/j.msea.2006.03.033 ↗
25. Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials, ASTM E399-90, Annual Book of ASTM Standards 03.01, 1993, pp. 407–528.
26. Bo · Int. J. Eng. Sci. · 1999 · 37 · 108910.1016/S0020-7225(98)00113-X ↗
27. Gall · Int. J. Plast. · 1999 · 15 · 62
28. Patoor · J. Phys. IV · 1996 · 6 · 22710.1051/jp4:1996127 ↗
29. Thamburaja · Int. J. Plast. · 2002 · 18 · 160710.1016/S0749-6419(02)00031-1 ↗
30. Sawaguchi · Metall. Mater. Trans. A · 2003 · 34 · 284710.1007/s11661-003-0186-x ↗