journal article·2017-09

Microstructure development of ultra fine grained Mg-22 wt%Gd alloy prepared by high pressure torsion

J. Čížek, P. Hruška, T. Vlasák, M. Vlček, M. Janeček, P. Minárik, T. Krajňák, M. Šlapáková, M. Dopita, R. Kužel, T. Kmječ, J.G. Kim, H.-S. Kim

Publisher page

Abstract

Abstract A hardenable lightweight Mg-22 wt%Gd alloy with ultra fine grained (UFG) structure was prepared by high pressure torsion (HPT) at ambient temperature. The development of microstructure during HPT processing was investigated. A homogeneous UFG structure with grain size of 300 nm was achieved after 15 HPT revolutions. The UFG alloy exhibits enhanced strength due to work strengthening by tangled dislocations forming a dense forest throughout grains. Dislocation density in the sample was determined by positron annihilation spectroscopy (PAS) and X-ray line profile analysis (XLPA). It was found that there is an additional source of X-ray profile broadening in addition to small crystallites and micro-strains caused by dislocations. The additional micro-strain component was attributed to lattice modulation by Gd-rich nano-wires formed by agglomeration of Gd solutes and to strains arising from boundaries of crystallite domains and inter-domain interactions. Analysis of the influence of the crystallite size on the strength of UFG Mg-22 wt%Gd alloy revealed a breakdown in the Hall-Petch relationship when the crystallite size decreased below a critical value of ≈30 nm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (89)

Show source-provided references
1. Magnesium: properties — applications — potential10.1016/S0921-5093(00)01351-4 ↗
2. Effect of temperature and grain size on the dominant diffusion process for superplastic flow in an AZ61 magnesium alloy10.1016/S1359-6454(99)00253-0 ↗
3. Microstructure evolution in isochronally heat treated Mg-Gd alloys10.1002/(SICI)1521-396X(199910)175:2<491::AID-PSSA491>3.0.CO;2-F ↗
4. Microstructure and texture variation with Gd addition in extruded Magnesium10.1016/j.jallcom.2016.10.179 ↗
5. Microstructure and mechanical properties of high performance Mg–Gd based alloys10.1016/j.matdes.2008.04.069 ↗
6. Gadolinium solubility and precipitate identification in Mg-Gd binary alloy10.1016/S1002-0721(12)60179-3 ↗
7. Massalski · 1990 · vol. 3
8. Precipitation and its effect on age-hardening behavior of as-cast Mg–Gd–Y alloy10.1016/j.matdes.2010.06.023 ↗
9. Structural changes of precipitates in an Mg-5 at%Gd alloy studied by transmission electron microscopy10.2320/matertrans.48.10 ↗
10. GdMg5: a complex structure with a large cubic cell10.1107/S0108270186097019 ↗
11. A thermodynamic description of the Gd–Mg–Y system10.1016/j.calphad.2006.10.004 ↗
12. Solute clusters and GP zones in binary Mg-RE alloys10.1016/j.actamat.2015.12.047 ↗
13. The structures of precipitates in an Mg-0.5 at%Nd age-hardened alloy studied by HAADF-STEM technique10.2320/matertrans.M2011163 ↗
14. Nano-precipitates made of atomic pillars revealed by single atom detection in a Mg-Nd alloy10.1063/1.3701272 ↗
15. Microstructure and thermal stability of ultra fine grained Mg-based alloys prepared by high-pressure torsion10.1016/j.msea.2006.01.177 ↗
16. Superplasticity of a nano-grained Mg–Gd–Y–Zr alloy processed by high-pressure torsion10.1016/j.msea.2015.10.094 ↗
17. Structure and mechanical properties of the Mg-Y-Gd-Zr alloy after high pressure torsion10.1016/j.msea.2016.05.003 ↗
18. Microstructures and tensile properties of Mg–Gd–Y–Zr alloy during multidirectional forging at 773 K10.1016/j.matdes.2013.03.054 ↗
19. Microstructural evolution and superplasticity in an Mg–Gd–Y–Zr alloy after processing by different SPD techniques10.1016/j.msea.2016.11.080 ↗
20. Microstructure, texture, and superplasticity of a fine-grained Mg-Gd-Zr alloy processed by equal-channel angular pressing10.1007/s11661-016-3765-3 ↗
21. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
22. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
23. Microstructure, texture and mechanical properties of friction stir processed Mg-14Gd alloys10.1016/j.matdes.2017.05.046 ↗
24. Microstructural evolution during hot shear deformation of an extruded fine-grained Mg–Gd–Y–Zr alloy10.1007/s10853-017-1031-8 ↗
25. An unusual extrusion texture in Mg–Gd–Y–Zr alloys10.1002/adem.201500516 ↗
26. Microstructural stability and grain growth kinetics in an extruded fine-grained Mg–Gd–Y–Zr alloy10.1007/s10853-015-9041-x ↗
27. Superplasticity of a fine-grained Mg–9Gd–4Y–0.4Zr alloy evaluated using shear punch testing10.1016/j.jmrt.2014.04.004 ↗
28. Hautojärvi · 1979 · 1
29. Positrons in surface physics10.1016/j.surfrep.2016.09.002 ↗
30. High-temperature studies of grain boundaries in ultrafine grained alloys by means of positron lifetime10.1103/PhysRevB.62.12021 ↗
31. In situ probing of fast defect annealing in Cu and Ni with a high-intensity positron beam10.1103/PhysRevLett.105.146101 ↗
32. Thermal stability of ultrafine grained copper10.1103/PhysRevB.65.094106 ↗
33. Structural characterization of ultrafine-grained interstitial-free steel prepared by severe plastic deformation10.1016/j.actamat.2015.12.039 ↗
34. Evolution of defects in copper deformed by high-pressure torsion10.1016/j.actamat.2010.12.028 ↗
35. The asset of ultra-fast digitizers for positron-lifetime spectroscopy10.1016/j.nima.2004.09.031 ↗
36. Methodology of positron lifetime spectroscopy: present status and perspectives
37. Application of maximum-likelihood method to decomposition of positron-lifetime spectra to finite number of components10.4028/www.scientific.net/MSF.255-257.772 ↗
38. Lebensdauer der Positronen in Silverbromid
39. Line profile analysis: pattern modeling versus profile fitting10.1107/S0021889805032978 ↗
40. MWP-fit: a program for multiple whole-profile fitting of diffraction peak profiles by ab initio theoretical functions10.1107/S0021889801011451 ↗
41. Characterization of the microstructure in random and textured polycrystals and single crystals by diffraction line profile analysis10.1016/j.msea.2010.08.059 ↗
42. Whole powder pattern modeling10.1107/S0108767301021298 ↗
43. XRD total pattern fitting applied to study of microstructure of TiO2 films10.1154/1.3392371 ↗
44. Hydrogen absorption in Mg-Gd alloy10.1016/j.ijhydene.2017.04.012 ↗
45. On the unexpected formation of rare earth hydrides in magnesium–rare earth casting alloys10.1016/j.scriptamat.2014.01.007 ↗
46. Strain induced GdH2 precipitate in Mg-Gd based alloys10.1016/j.intermet.2010.11.001 ↗
47. Unexpected formation of hydrides in heavy rare earth containing magnesium alloys10.1016/j.jma.2016.08.002 ↗
48. Lattice parameters and zone overlap in solid solutions of lead in magnesium10.1016/0001-6160(59)90090-2 ↗
49. The gadolinium-hydrogen system10.1021/ja01587a003 ↗
50. Thermal development of microstructure and precipitation effects in Mg–10wt%Gd alloy10.1002/pssa.200521483 ↗
51. Rate-dependent hardening due to twinning in an ultrafine-grained magnesium alloy10.1016/j.actamat.2011.12.002 ↗
52. Excellent mechanical properties of an ultrafine-grained quasicrystalline strengthened magnesium alloy with multi-modal microstructure10.1016/j.matlet.2013.06.006 ↗
53. Enhanced superplasticity and diffusional creep in ultrafine-grained Mg–6Al–1Zn alloy with high thermal stability10.1016/j.scriptamat.2012.10.011 ↗
54. Ultrafine-grained Mg–Zn–Zr alloy with high strength and high-strain-rate superplasticity10.1016/j.msea.2012.01.063 ↗
55. Effect of high Mn content on development of ultra-fine grain extruded magnesium alloy10.1016/j.matdes.2015.10.093 ↗
56. West · 1979 · 89
57. Microstructure and dislocation density evolutions in MgAlZn alloy processed by severe plastic deformation10.1007/s10853-012-6538-4 ↗
58. Microstructural and mechanical characteristics of AZ61 magnesium alloy processed by high-pressure torsion10.2320/matertrans.ME200718 ↗
59. High-pressure torsion of hafnium10.1016/j.msea.2009.11.060 ↗
60. Evidence of α → ω phase transition in titanium after high pressure torion10.3139/146.101606 ↗
61. Correlation between strength and microstructure of ball-milled Al-Mg alloys determined by X-ray diffraction10.1016/0921-5093(93)90717-S ↗
62. Thermal stability of submicron grained copper and nickel10.1016/S0921-5093(97)00107-X ↗
63. Plastic deformation of nickel under high hydrostatic pressure10.1016/j.jallcom.2004.01.039 ↗
64. Stability of microstructure in silver processed by severe plastic deformation10.3139/146.110113 ↗
65. Positron-lifetime investigations of thermal stability of ultra-fine grained nickel10.1002/1521-396X(200206)191:2<391::AID-PSSA391>3.0.CO;2-H ↗
66. Substitutional solution hardening of magnesium single crystals10.1080/14786437208229311 ↗
67. Contrast factors of dislocations in the hexagonal crystal system10.1107/S0021889802009536 ↗
68. Random disclination ensembles in ultrafine-grained materials produced by severe plastic deformation10.1016/1359-6462(95)00573-0 ↗
69. On the reliability of powder diffraction Line Profile Analysis of plastically deformed nanocrystalline systems10.1038/srep20712 ↗
70. Theory of X-ray scattering by crystals containing dislocations, screw and edge dislocations randomly distributed throughout the crystal
71. The determination of density and distribution of dislocations in deformed single crystals from broadened x-ray diffraction profiles10.1002/pssa.19700020224 ↗
72. Calculation of x-ray spectra for nanocrystalline materials10.1103/PhysRevB.71.024114 ↗
73. Grain boundaries and dislocations10.1126/science.1071040 ↗
74. Mechanisms for enhanced plasticity in magnesium alloys10.1016/j.actamat.2014.09.006 ↗
75. Plastic strain in metals
76. Keh · 1962 · 231
77. Friedrich · 2006
78. Analysis of pairwise dislocation interaction and its contribution to flow stress during magnesium crystal basal slip10.1016/0025-5416(78)90030-7 ↗
79. The deformation and ageing of mild Steel: III Discussion of results10.1088/0370-1301/64/9/303 ↗
80. The cleavage strength of polycrystals
81. Petch relation and grain boundary sources
82. Hall-Petch relationship and dislocation model for deformation of ultrafine-grained and nanocrystalline metals10.2320/matertrans.MA201310 ↗
83. The ductile-brittle transition in the fracture of a-iron: I10.1080/14786435808237038 ↗
84. A maximum in the strength of nanocrystalline copper10.1126/science.1086636 ↗
85. Deformation mechanism crossover and mechanical behaviour in nanocrystalline materials10.1080/09500830031000120891 ↗
86. Influence of grain size on deformation mechanisms: an extension to nanocrystalline materials10.1016/j.msea.2005.05.111 ↗
87. The Hall–Petch breakdown in nanocrystalline metals: a crossover to glass-like deformation10.1016/j.actamat.2007.07.020 ↗
88. Influence of grain size and texture on Hall–Petch relationship for a magnesium alloy10.1016/j.scriptamat.2011.08.028 ↗
89. Hall-Petch breakdown in fine-grained pure magnesium at low strain rates10.1007/s11661-014-2641-2 ↗