journal article·2012-10

Effect of twinning on the deformation behavior of an extruded Mg–Zn–Zr alloy during hot compression testing

W.-J. Ai, G. Fang, J. Zhou, M.A. Leeflang, J. Duszczyk

Publisher page

Abstract

Abstract The research was aimed to understand the formation and evolution of twins during hot deformation of a wrought magnesium alloy and the effect of twinning on strain hardening. Hot compression tests of an extruded Mg–Zn–Zr alloy were performed at temperatures of 350–450 °C and strain rates of 0.01–10 s −1 . A concave stress–strain curve shape was observed, when a high value of the Zener–Hollomon parameter was applied. Such a stress–strain curve shape was however not observable during tests at a low value of the Z parameter. Microstructure examination of specimens obtained from interrupted compression tests at high values of the Z parameter showed that a large number of the extension twins formed and then reached saturation when the deforming material was in the work-hardening regime. Most of these twins in each elongated grain were found to be parallel to each other. After the extension twins completely consumed the elongated grain matrix, a number of contraction twins emerged, leading to an increased strain-hardening rate through the Hall–Petch effect and finally to a necklace-like microstructure after deformation reached the steady state. However, at low values of the Z parameter, the formation and evolution of twins hardly occurred, leading to a uniform equiaxial grain structure after the compression tests.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Busk · 1987
2. Von Mises · Z. Angew. Math. Mech. · 1928 · 8 · 16110.1002/zamm.19280080302 ↗
3. Jiang · Mater. Sci. Eng. A · 2007 · 445–446 · 30210.1016/j.msea.2006.09.069 ↗
4. Caijun · J. Appl. Math. Mech. · 2005 · 8 · 1
5. Knezevic · Acta Mater. · 2010 · 58 · 623010.1016/j.actamat.2010.07.041 ↗
6. Hong · Scr. Mater. · 2011 · 64 · 14510.1016/j.scriptamat.2010.09.030 ↗
7. Hong · Acta Mater. · 2010 · 58 · 587310.1016/j.actamat.2010.07.002 ↗
8. Roberts · 1960
9. Huppmann · J. Mater. Sci. · 2011 · 46 · 93810.1007/s10853-010-4838-0 ↗
10. Beer · Mater. Sci. Eng. A · 2006 · 423 · 29210.1016/j.msea.2006.02.041 ↗
11. Kalidindi · Adv. Eng. Mater. · 2003 · 5 · 22910.1002/adem.200300320 ↗
12. Yin · Mater. Sci. Eng. A · 2005 · 392 · 32010.1016/j.msea.2004.09.039 ↗
13. Ye · Trans. Nonferrous Met. Soc. China · 2005 · 15 · 884
14. Jain · Mater. Sci. Eng. A · 2007 · 462 · 2910.1016/j.msea.2006.03.160 ↗
15. Huan · J. Mater. Sci.: Mater. Med. · 2010 · 21 · 2623
16. Zener · J. Appl. Phys. · 1944 · 15 · 2210.1063/1.1707363 ↗
17. Sellars · Sci. Rev. Methods · 1966 · 63 · 731
18. Godet · Scr. Mater. · 2006 · 55 · 105510.1016/j.scriptamat.2006.07.059 ↗
19. Barnett · Acta Mater. · 2008 · 56 · 510.1016/j.actamat.2007.08.034 ↗
20. Styczynski · Scr. Mater. · 2004 · 50 · 94310.1016/j.scriptamat.2004.01.010 ↗
21. Yang · Acta Metall. Sinica · 2009 · 45 · 1303
22. Barnett · J. Light Met. · 2001 · 1 · 16710.1016/S1471-5317(01)00010-4 ↗