Effect of back stress evolution due to martensitic transformation on iso-volume fraction lines in a Cr–Ni–Mo–Al–Ti maraging steel
Source abstract
Abstract
Abstract The effect of the back stress evolution on the iso-martensite volume fraction lines (the iso- ξ lines) is experimentally investigated in a Cr–Ni–Mo–Al–Ti maraging steel in the process of martensitic transformation by identifying the iso- ξ lines inside the transformation zone bounded by the martensite-start and -finish lines. Each iso- ξ line is composed of a tensile-branch and a compressive-branch, which are parallel to the tensile- and compressive-branches of the martensite-start line, respectively. When the back stress evolves due to martensitic transformation, the iso- ξ line translates as a whole into the direction of the back stress evolution with its slope unchanged. The ordinate of the intersection point of both branches stands for the value of the back stress. The back stress evolution identified in the present tests well supplements the evolution response determined in a quite different way in the unloading tests described in [Mater. Sci. Eng. A (2002) in press].
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Shape Memory Alloy Transformations · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Tanaka · Int. J. Plasticity · 1986 · 2 · 5910.1016/0749-6419(86)90016-1 ↗
2. Patoor · Arch. Mech. · 1988 · 40 · 775
3. J.B. Leblond, J. Devaux, J.C. Devaux, Int. J. Plasticity 5 (1989) 581, 573.10.1016/0749-6419(89)90002-8 ↗
4. Liang · J. Eng. Math. · 1992 · 26 · 42910.1007/BF00042744 ↗
5. Q.P. Sun, K.C. Hwang, J. Mech. Phys. Solids 41 (1993) 1, 19.10.1016/0022-5096(93)90061-J ↗
6. V.I. Levitas, Int. J. Eng. Sci. 33 (1995) 921, 943.10.1016/0020-7225(94)00117-3 ↗
7. J.B. Boyd, D.C. Lagoudas, Int. J. Plasticity 12 (1996) 805, 843.10.1016/S0749-6419(96)00030-7 ↗
8. 1997
9. Fischer · Int. J. Solids Struct. · 1989 · 35 · 220910.1016/S0020-7683(97)00134-0 ↗
10. Fischer · Arch. Mech. · 2000 · 52 · 569
11. Fischer · Int. J. Plasticity · 2000 · 16 · 72310.1016/S0749-6419(99)00078-9 ↗
12. Melton · 1990 · 21
13. Bekker · J. Mech. Phys. Solids · 1997 · 45 · 94910.1016/S0022-5096(96)00111-1 ↗
14. 1987
15. Miyazaki · Metall. Trans. A · 1986 · 17A · 5310.1007/BF02644442 ↗
16. Tobushi · Smart Mater. Struct. · 1996 · 5 · 78810.1088/0964-1726/5/6/008 ↗
17. Nishimura · Mater. Sci. Eng. A · 1996 · 221 · 13410.1016/S0921-5093(96)10486-X ↗
18. Nishimura · Mater. Sci. Eng. A · 1999 · 264 · 23210.1016/S0921-5093(98)01093-4 ↗
19. Nishimura · Int. J. Mech. Sci. · 1999 · 42 · 34710.1016/S0020-7403(98)00126-X ↗
20. Tanaka · Arch. Mech. · 1999 · 51 · 805
21. Novak · Mater. Sci. Eng. A · 1997 · 234-236 · 41410.1016/S0921-5093(97)00175-5 ↗
22. Oregeas · Acta Mater. · 1998 · 46 · 557910.1016/S1359-6454(98)00167-0 ↗
23. Raniecki · Arch. Mech. · 1999 · 51 · 745
24. Gall · Acta Mater. · 1999 · 47 · 120310.1016/S1359-6454(98)00432-7 ↗
25. Patoor · 1997 · 121
26. Lim · J. Eng. Mater. Techn. · 1999 · 121 · 910.1115/1.2816007 ↗
27. Gall · Int. J. Plasticity · 2000 · 16 · 118910.1016/S0749-6419(00)00007-3 ↗
28. Qidwai · Int. J. Plasticity · 2000 · 16 · 130910.1016/S0749-6419(00)00012-7 ↗
29. Azzouz · 2000 · 175
30. Azzouz · J. Phys. IV · 2001 · 11 · Pr4/189
31. Bammann · 1995 · VII · 275
32. Azzouz · ZAMM · 2000 · 80 · S185
33. Gautier · 1988 · 285
34. Gautier · 1989 · 777
35. Nagayama · Mater. Sci. Eng. A · 2001 · 308 · 2510.1016/S0921-5093(00)01999-7 ↗
36. K. Nagayama, T. Terasaki, S. Goto, K. Tanaka, F.D. Fischer, T. Antretter, G. Cailletaud, F. Azzouz, Mater. Sci. Eng. A (2002) in press.
37. Lemaitre · 1990
38. Videau · J. Phys. IV, Coll. C1, Suppl. J. Phys. III · 1996 · 6 · C1/465