journal article·2001-02

The effect of β, β′ and β″ precipitates in a homogenised AA6063 alloy on the hot deformability and the peak hardness

J van de Langkruis, W.H Kool, C.M Sellars, M.R van der Winden, S van der Zwaag

Materials Science and Engineering: A· Volume 299· Issue 1-2
Publisher page

Abstract

Abstract The effect of β′-, β″-, and β Mg–Si precipitates in the initial microstructure of an AA6063 alloy on the flow stress at elevated temperatures was studied using plane strain compression tests. The stress–strain curves were modelled with a general solute-dependent constitutive equation based on the exponential saturation equation as proposed by Sah and the hyperbolic sine law. The solute content during testing was estimated using a finite-volume based numerical code for particle dissolution. It was found that in the experimental regime investigated, β″ precipitates in the initial microstructure have no significant effect on the flow stress and peak hardness. Furthermore β′ precipitates in the initial microstructure increase the flow stress at 673 K and decrease the corresponding peak hardness, but do not influence the flow stress at 773 K and corresponding peak hardness. The presence of β precipitates results in a significant reduction of the flow stress and the peak hardness by reducing the solute content during deformation. Taking into account the solute content calculated with the finite-volume model, the stress–strain curves can be modelled successfully with only one set of parameters for a range of pre-treatments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Tanihata · J. Mater. Sci. · 1999 · 34 · 120510.1023/A:1004504805781 ↗
2. O. Reiso, Ph.D. thesis, Norwegian Institute of Technology, Trondheim, Norway, 1992.
3. O. Reiso, O. Sjøhum, U. Tundal, J.E. Hafsås, in: R.I. Werner (Ed.), Proceedings of the Sixth International Aluminum Extrusion Technology Seminar, Chicago, vol. 1, April 1996, Aluminium Extruders Council, Flagstaff, USA, 1996, p. 1.
4. Bratland · Acta Mater. · 1997 · 45 · 110.1016/S1359-6454(96)00100-0 ↗
5. Zajac · Mater. Sci. Forum · 1996 · 397 · 217
6. A.J. Bryant, E. Rise, D.J. Field, E.P. Butler, Alcan International, European Patent 0 222 479 B1, granted 1989.
7. F.J. Vermolen, Ph.D. thesis, Delft University of Technology, Delft University Press, Delft, The Netherlands, 1998.
8. Vermolen · Mater. Sci. Eng. · 1998 · 254 · 1310.1016/S0921-5093(98)00763-1 ↗
9. Chen · J. Mater. Sci. · 1999 · A272 · 25010.1016/S0921-5093(99)00518-3 ↗
10. van de Langkruis · Mater. Sci. Eng. · 1999 · A266 · 13510.1016/S0921-5093(99)00046-5 ↗
11. J. van de Langkruis, M.S. Vossenberg, W.H. Kool, S. van der Zwaag, in: Proceedings Conference Light Metals, TMS Annual Meeting, San Diego, CA, USA, February 28–March 4, 1999, in press.
12. C. Sparks, G. Baxter, Use of the Servotest Plane Strain Compression Machine, Internal Report, Department of Engineering Materials, University of Sheffield, March 1995.
13. Silk · Mater. Sci. Technol. · 1999 · 15 · 29510.1179/026708399101505860 ↗
14. S.B. Davenport, C.N. Sparks, C.M. Sellars, in: B. Hutchinson, M. Andersson, G. Engberg, B. Karlson, T. Siwecki (Eds.), Proceedings of the Conference on Thermomechanical Processing — Theory, Modelling and Practice, Stockholm, Sweden, 4–6 September, 1996, p. 249.
15. Sah · J. Aust. Inst. Met. · 1969 · 14 · 292
16. Puchi · Met. Mater. Trans. · 1995 · 26A · 289510.1007/BF02669647 ↗
17. Jonas · Met. Rev. · 1969 · 14 · 110.1179/095066069790138056 ↗
18. McQueen · Mater. Sci. Forum · 1993 · 17 · 1
19. Frost · 1982
20. Espedal · J. Scand. Met. · 1989 · 18 · 131
21. Verlinden · Scr. Met. Mater. · 1993 · 28 · 144110.1016/0956-716X(93)90496-F ↗
22. Raybould · J. Inst. Met. · 1973 · 101 · 45
23. Q. Zhu, Ph.D. thesis, Technische Fakultät der Universität Erlangen-Nürnberg, Germany, 1994.
24. R.H. Davies, A.T. Dinsdale, J.A. Gisby, S.M. Hodson, R.G.J. Ball, in: P. Nash, B. Sundman (Eds.), Proceedings Conference on Applications of Thermodynamics in the Synthesis and Processing of Materials, Rosemont, The Minerals, Metals and Materials Society/AIME, Warrendale USA, 1995, p. 371.
25. Fujikawa · Defect and Diffusion Forum · 1997 · 403 · 143
26. Grong · 1994