journal article·2004-11

Hydrogen assisted stress-cracking behaviour of electron beam welded supermartensitic stainless steel weldments

P. Bala Srinivasan, S.W. Sharkawy, W. Dietzel

Materials Science and Engineering: A· Volume 385· Issue 1-2
Publisher page

Abstract

Abstract Supermartensitic stainless steel (SMSS) grades are gaining popularity as an alternate material to duplex and super duplex stainless steels for applications in oil and gas industries. The weldability of these steels, though reported to be better when compared to conventional martensitic stainless steels, so far has been addressed with duplex stainless steel electrodes/fillers. This work addresses the stress-cracking behaviour of weldments of a high-grade supermartensitic stainless steel (11% Cr, 6.5% Ni and 2% Mo) in the presence of hydrogen. Welds were produced with matching consumables, using electron beam welding (EBW) process. Weldments were subjected to slow strain rate tests in 0.1 M NaOH solution, with introduction of hydrogen into the specimens by means of potentiostatic cathodic polarisation at a potential of −1200 mV versus Ag/AgCl electrode. Reference tests were performed in air for comparison, and the results suggest that both the SMSS base material and the EB weld metal are susceptible to embrittlement under the conditions of hydrogen charging.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. P.S. Jackman, H. Everson, Corrosion 95, Paper No. 95. NACE International, Houston, USA, 1995.
2. H. van der Winden, P. Toussaint, L. Coudreuse, in: Proceedings of the Supermartensitic Stainless Steels 2002, The Belgian Welding Institute, Brussels, Belgium, 3–4 October 2002.
3. P.E. Kvaale, S. Olsen, in: Proceedings of the Stainless Steel World ‘99, SSW99-202, Organised by Stainless Steel World Magazine, The Hague, The Netherlands, November 1999, p. 19.
4. Y. Miyata, M. Kimura, T. Koseki, Corrosion 97, Paper No. 19, NACE International, Houston, USA, 1997.
5. Karlsson · Svetsaren · 1999 · 3 · 3
6. Development of advanced joining technologies for supermartensitic stainless line pipes—JOTSUP, Project No: GRD1-1999-10278, Contract No. G5RD-CT-1999-00053-JOTSUP, GKSS-Forschungszentrum Geesthacht GmbH, Institute for Materials Research, Geesthacht, Germany, 1999–2003.
7. M. Ueda, T. Kushida, T. Mori, Corrosion 95, Paper No. 80, NACE International, Houston, USA, 1995.
8. Hara · Corrosion · 2000 · 56 · 53310.5006/1.3280558 ↗
9. Y. Miyata, M. Kimura, T. Toyooka, F. Murase, in: Proceedings of EUROCORR ‘98, European Federation of Corrosion, Paper No. 23, KCI Publications, Utrecht, The Netherlands, 28 September–1 October 1998.
10. International Standard ISO 7539, Corrosion of Metals and Alloys—Stress Corrosion Testing, Part 7: Slow Strain Rate Stress Corrosion Tests, International Organization for Standardization, Geneva, 1989.
11. L. Karlsson, S. Rigdal, A. Dhooge, E. Deleu, M. Goldschmitz, J. van den Broek, in: Proceedings of the Stainless Steel World 2001, The Hague, The Netherlands, 13–15 November 2001, p. 47.
12. E. Deleu, A. Dhooge, J.J. Dufrane, in: Proceedings of the Supermartensitic Stainless Steels ‘99, Paper No. S99-27, The Belgian Welding Institute, Brussels, Belgium, 27–28 May 1999, p. 232.
13. T. Omura, T. Kushida, T. Hayashi, Y. Matsuhiro, Y. Komizo, in: Proceedings of the Supermartensitic Stainless Steels ‘99, Paper No. S99-15, The Belgian Welding Institute, Brussels, Belgium, 27–28 May 1999, p. 127.
14. R. Pöpperling, K.A. Niederhoff, J. Fliethmann, M. Keller, Corrosion 97, Paper No. 38, NACE International, Houston, USA, 1997.
15. D.M. Seeger, T. Boellinghaus, H. Hoffmeister, in: J.M. Olive, et al. (Eds.), Proceedings of the 2nd International Conference on Environmental Degradation of Engineering Materials, Paper No. H3-3-02, Bordeaux, France, 29 June–2 July 2003 (CD-ROM ISBN 1-904350-07-0).
16. T. Boellinghaus, H. Hoffmeister, S. Dietrich, in: Proceedings of EUROCORR ‘97, European Federation of Corrosion, Paper No. 28, Trondheim, Norway, 22–25 September 1997.
17. H. Asahi, T. Hara, M. Sugiyama, Corrosion/96, Paper No. 61, NACE International, Houston, USA, 1996.
18. H.J. Dundas, Corrosion 79, Paper No. 79, NACE International, Houston, USA, 1979.
19. R.D. Kane, G. Farquhar, D. Sanders, Corrosion 97, Paper No. 29, NACE International, Houston, USA, 1997.
20. Cumino · Latin Am. Appl. Res · 2002 · 32 · 215