journal article·2007-01

Dynamic recrystallisation and superplasticity in pure aluminium with zirconium addition

S. Katsas, R. Dashwood, R. Grimes, M. Jackson, G. Todd, H. Henein

Materials Science and Engineering: A· Volume 444· Issue 1-2
Publisher page

Abstract

Abstract When commercial superplastic aluminium alloys were first under development it was concluded that to be successful the alloy should containboth a solid solution addition and a dispersion of fine, thermally stable dispersoids. In contrast to early beliefs, the present work demonstratesthat a simple Al–1wt.%Zr alloy can exhibit good superplastic performance despite the absence of a solid solution element. The starting materialwas in the form of ∼1mm diameter particles produce via impulse atomisation that conferred a solidification rate ∼10 3 Ks −1 . After extrusionconsolidation, heat treatment to produce a fine distribution of metastable Al 3 Zr precipitates, and rolling, the resulting sheet exhibited superplasticductilities in excess of 500% at a strain rate of 10 −1 s −1 . An EBSD study of the deformation behaviour demonstrated substantial grain refinementresulting from dynamic recrystallisation.© 2006 Elsevier B.V. All rights reserved. Keywords: Superplasticity; Aluminium alloy; Dynamic recrystallisation; Rapid solidification; Zirconium
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Jonas · Metall. Rev. · 1969 · 130 · 110.1179/095066069790138056 ↗
2. Sellars · Met. Forum · 1981 · 4 · 75
3. Humphreys · 1995
4. Grimes · Aluminium (Aluminium-Verlag GmbH) · 1975 · 51 · 720
5. Watts · Met. Sci. · 1976 · 10 · 18910.1016/0036-9748(76)90147-2 ↗
6. Stowell · Met. Sci. J. · 1969 · 3 · 4110.1179/msc.1969.3.1.41 ↗
7. Lee · Acta Met. · 1969 · 17 · 105710.1016/0001-6160(69)90051-0 ↗
8. Ahlborn · J. Mater. Sci. · 1969 · 4 · 94410.1007/BF00555308 ↗
9. Robson · Mater. Sci. Eng. A · 2003 · 352 · 24010.1016/S0921-5093(02)00894-8 ↗
10. Robson · Acta Mater. · 2001 · 49 · 59910.1016/S1359-6454(00)00351-7 ↗
11. Yamagata · Scripta Metall. Mater. · 1992 · 27 · 20110.1016/0956-716X(92)90113-S ↗
12. Yamagata · Acta Metall. Mater. · 1995 · 43 · 72310.1016/0956-7151(94)00267-L ↗
13. Tanaka · Mater. Trans., JIM · 1999 · 40 · 24210.2320/matertrans1989.40.242 ↗
14. Ponge · Scripta Mater. · 1997 · 37 · 176910.1016/S1359-6462(97)00346-1 ↗
15. D. Yuan, et al., US Patent 5,609,919, March 11, 1997.
16. Wiskel · Can. Metall. Q. · 2002 · 41 · 9710.1179/cmq.2002.41.1.97 ↗
17. Freyberg · Met. Mater. Trans. B · 2000 · 34 · 24310.1007/s11663-003-0011-3 ↗
18. Grimes · Mater. Sci. Technol. · 2000 · 16 · 133410.1179/026708300101507190 ↗
19. Clyne · 1993
20. Ma · Mater. Sci. Eng. A · 2003 · 351 · 14810.1016/S0921-5093(02)00824-9 ↗