Rapid precipitation of dispersoids during extrusion of an Al–0.91wt.% Mn–0.13wt.% Zr–0.17wt.% Sc-alloy
Source abstract
Abstract
Abstract Dispersoids are usually formed during precipitation annealing (homogenisation) of aluminium alloys in order to inhibit recrystallisation during subsequent processing and/or use at high temperatures. In this respect, Al 3 (Sc x ,Zr 1− x )-dispersoids are most efficient, as they display the unique combination of rapid precipitation and slow coarsening. The objective of this work has been to investigate if a high recrystallisation resistance can be achieved during extrusion of an Al–0.91 wt.% Mn–0.13 wt.% Zr–0.17 wt.% Sc-alloy, without first subjecting the material to precipitation annealing, i.e. to study if a more efficient production route can be applied to produce profiles with fibrous/unrecrystallised structures. Success requires rapid formation of dispersoids during pre-heating of as-cast extrusion ingot. One variant was therefore pre-heated and extruded directly after casting. This variant was compared to an ingot which was first subjected to precipitation annealing. Both variants displayed similar extrudabilities and completely fibrous as-extruded microstructures with no signs of recrystallisation, i.e. a shorter process route (without precipitation annealing) can be applied for the investigated alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Pettersen · Mater. Sci. Forum · 2000 · 331–337 · 80510.4028/www.scientific.net/MSF.331-337.805 ↗
2. Humphreys · 1995
3. Nes · Acta Metall. · 1985 · 33 · 1110.1016/0001-6160(85)90214-7 ↗
4. Y.W. Riddle, PhD Thesis, Georgia Institute of Technology, USA, 2000.
5. Forbord · Scr. Mater. · 2004 · 51 · 33310.1016/j.scriptamat.2004.03.033 ↗
6. W. Lefebvre, F. Danoix, H. Hallem, B. Forbord, K. Marthinsen, Acta Mater., submitted for publication.
7. C.B. Fuller, PhD Thesis, Northwestern University, 2003, http://arc.nucapt.northwestern.edu/refbase/show.php?record=147.
8. Fuller · Acta Mater. · 2005 · 53 · 540110.1016/j.actamat.2005.08.016 ↗
9. Tolley · Scr. Mater. · 2005 · 52 · 62110.1016/j.scriptamat.2004.11.021 ↗
10. Harada · Mater. Sci. Eng. A · 2002 · 329–331 · 68610.1016/S0921-5093(01)01608-2 ↗
11. Harada · Scr. Mater. · 2003 · 48 · 21910.1016/S1359-6462(02)00428-1 ↗
12. Fuller · Acta Mater. · 2005 · 53 · 541510.1016/j.actamat.2005.08.015 ↗
13. Forbord · Mater. Sci. Forum · 2004 · 467–470 · 36910.4028/www.scientific.net/MSF.467-470.369 ↗
14. Røyset · Int. Mater. Rev. · 2005 · 50 · 1910.1179/174328005X14311 ↗
15. Fuller · Acta Mater. · 2003 · 51 · 480310.1016/S1359-6454(03)00320-3 ↗
16. Forbord · Mater. Forum · 2004 · 28 · 1179
17. Robson · Acta Mater. · 2004 · 52 · 140910.1016/j.actamat.2003.11.023 ↗
18. Zakharov · Met. Sci. Heat Treat. · 1997 · 2 · 6110.1007/BF02467664 ↗
19. Fujikawa · Defect Diffus. Forum · 1997 · 115 · 143
20. Mehrer · 1992 · vol. 26
21. J.A. Sæter, PhD Thesis, Norwegian University of Science and Technology, Trondheim, Norway, 1997.
22. S. Tangen, PhD Thesis, Norwegian University of Science and Technology, Trondheim, Norway, 2004.
23. O. Reiso, H. Westengen, L. Auran, Internationale Leichtmetalltagung, Leoben Wien, 7, 186–188, 1981.
24. Villars · 1985
25. Moeller · 1989
26. Marquis · Acta Mater. · 2006 · 54 · 11910.1016/j.actamat.2005.08.035 ↗
27. van Dalen · Acta Mater. · 2005 · 53 · 422510.1016/j.actamat.2005.05.022 ↗