A numerical simulation of super-plastic die forging process for Zr-based bulk metallic glass spur gear
Source abstract
Abstract
Abstract Because of the high strength and hardness at room temperature, the processing of bulk metallic glasses (BMGs) is very difficult whether by machining or by plastic forming, and the applications of BMGs are restricted. The development of super-plastic precise forming technology, utilizing viscous flowing property of BMGs exhibited in super-cooled liquid region, will lead to wider applications of the alloys. In this paper, the different die forging processes and the deformation behaviors of Zr41.25Ti13.75Ni10Cu12.5Be22.5 BMG fine spur gear are analyzed by FEM simulation. The simulation results are compared with experimental ones. The results show that there is significant difference between the forming load–time curves and flow behaviors of the three processes; compared with the other two processes, the two-stage hole-forming process has lower forming pressure and better cavity filling effect, or has larger die cavity fullness and lower stress concentration under the same forming loads; when the two-stage hole-forming process is adopted, the inadequate filling state of cavity is helpful to decrease the hole-forming load in the second stage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Experimental study on divided flow precise extrusion of spur gear and analysis of upper limit
2. The net-shape forming of gears10.1016/S0261-3069(99)00074-6 ↗
3. Precision forging of spur gears with inside relief10.1016/S0890-6955(99)00015-2 ↗
4. Study of precision forming process of spur gear by precision hot forging and cold push-extrusion
5. Superplastic forming techniques for fine precision amorphous alloy parts
6. High temperature deformation of a fully amorphous and partially crystallized bulk metallic glass10.1016/S0151-9107(02)80041-1 ↗
7. Stain rate-dependent deformation in bulk metallic glasses10.1016/S0966-9795(02)00146-2 ↗
8. Deformation and flow in bulk metallic glasses and deeply undercooled glass forming liquids—a self consistent dynamic free volume model10.1016/S0966-9795(02)00160-7 ↗
9. Super-plastic forming properties of Zr-based bulk amorphous alloys
10. Super-plastic die forging of fine precision spur gear of Zr-based bulk metallic glass10.3901/JME.2005.03.151 ↗
11. Superplastic extrusion behavior of Zr55Al10Ni5Cu30 bulk metallic glass10.1016/S1003-6326(06)60006-X ↗
12. Influence of relaxation and crystallization on micro-hardness and deformation of bulk metallic glass10.1016/j.msea.2005.07.020 ↗