Hydrogen-assisted cracking of T-250 maraging steel
Source abstract
Abstract
Abstract Hydrogen-assisted cracking (HAC) of T-250 maraging steel has been studied. The results showed that HAC could occur in air when the relative humidity (RH) was ≥30%. The arrested threshold stress intensity factor, KIH (MPa m1/2), decreases linearly with increasing the logarithm of hydrogen concentration entered into the samples during putting in humid air or charging in the solution, C (ppm), i.e. KIH = 49.5–26.1 ln C. The threshold stress intensity factor for the crack initiating from notch tip in humid air with RH = 82%, KIH(ρ), increases with increasing the square root of notch radius ρ, as ρ > ρ0 = 0.08 mm, i.e. K IH ( ρ > 0.08 mm ) = − 32.7 + 244.9 ρ , however, when ρ ≤ ρ0, KIH(ρ ≤ 0.08 mm) = KIH = 37.5 MPa m1/2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Kim · Eng. Fail. Anal. · 2005 · 12 · 30710.1016/j.engfailanal.2004.02.005 ↗
2. Tomkiewicz · Chem. Eng. J. · 2000 · 77 · 7310.1016/S1385-8947(99)00147-3 ↗
3. Seddon · Int. J. Impact Eng. · 2006 · 32 · 104510.1016/j.ijimpeng.2004.09.002 ↗
4. Tsay · J. Mater. Eng. Perform. · 1997 · 6 · 17710.1007/s11665-997-0011-6 ↗
5. Rohrbach · 1990
6. Asayama · Trans. Jpn. Inst. Metals · 1984 · 25 · 39010.2320/matertrans1960.25.390 ↗
7. Reddy · Eng. Fail. Anal. · 2001 · 8 · 26310.1016/S1350-6307(00)00011-X ↗
8. National Standard of China, No.GB12445.3-90, 1990, p. 16.
9. Wang · Mater. Sci. Eng. B · 2003 · 98 · 110.1016/S0921-5107(02)00395-1 ↗
10. Hirth · Metall. Trans. A. · 1980 · 11 · 86110.1007/BF02654700 ↗
11. Petch · Nature · 1952 · 169 · 84210.1038/169842a0 ↗
12. Oriani · Acta Metall. · 1977 · 25 · 97910.1016/0001-6160(77)90126-2 ↗
13. Bechem · Metall. Trans. · 1972 · 3 · 437
14. Chu · Scripta Metall. · 1979 · 13 · 106310.1016/0036-9748(79)90204-7 ↗
15. Birnbaum · Mater. Sci. Eng. A · 1994 · 176 · 19110.1016/0921-5093(94)90975-X ↗
16. Lu · Sci. China E · 1997 · 40 · 53010.1007/BF02917169 ↗
17. Rao · Eng. Fail. Anal. · 2005 · 12 · 32510.1016/j.engfailanal.2004.01.004 ↗
18. Batra · Inter. J. Plast. · 2003 · 19 · 13910.1016/S0749-6419(01)00032-8 ↗
19. Chu · Scripta Metall. · 1979 · 13 · 105710.1016/0036-9748(79)90203-5 ↗
20. Creager · Inter. J. Frac. Mech. · 1976 · 3 · 24710.1007/BF00182890 ↗