journal article·2013-03

Large strain deformation of bimodal layer thickness Cu/Nb nanolamellar composites

T.A. Wynn, D. Bhattacharyya, D.L. Hammon, A. Misra, N.A. Mara

Publisher page

Abstract

Abstract Nanolayered composites have garnered much attention due to their ability to withstand deformation to large strains, shock deformation, and irradiation induced microstructural damage. These behaviors have been attributed to high densities of bimetal interfacial content. Although they exhibit yield strengths approaching theoretical limits, multilayered materials with layer thicknesses less than 10 nm have shown limited ductility in rolling. In this study, bimodal 4 nm/40 nm Cu/Nb multilayers are rolled to 30% thickness reduction without the onset of shear instability. The stacking order used allows focus to be drawn specifically to the ductility by the boundary crossing mechanism exhibited in multilayered materials with layer thicknesses below 10 nm. Through the geometric constraint offered by alternating 4 nm and 40 nm layer thickness modes, the onset of localized shear is avoided and the 4 nm layers can be rolled to large strains.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · High-Velocity Impact and Material Behavior · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Ham · Mater. Sci. Eng., A · 2011 · 528 · 202810.1016/j.msea.2010.10.101 ↗
2. Phillips · Acta Mater. · 2003 · 51 · 317110.1016/S1359-6454(03)00128-9 ↗
3. Mara · Appl. Phys. Lett. · 2008 · 92 · 110.1063/1.2938921 ↗
4. Wang · Scri. Mater. · 2006 · 54 · 159310.1016/j.scriptamat.2006.01.027 ↗
5. Misra · JOM · 2007 · 59 · 6210.1007/s11837-007-0120-6 ↗
6. Was · Thin Solid Films · 1996 · 286 · 110.1016/S0040-6090(96)08905-5 ↗
7. Misra · Scri. Mater. · 1998 · 39 · 55510.1016/S1359-6462(98)00196-1 ↗
8. Misra · J. Mater. Sci. · 2007 · 42 · 176510.1007/s10853-006-0895-9 ↗
9. Spitzig · Acta Metall. Mater. · 1987 · 35 · 242710.1016/0001-6160(87)90140-4 ↗
10. Mara · Mater. Sci. Forum · 2010 · 633-634 · 64710.4028/www.scientific.net/MSF.633-634.647 ↗
11. Misra · 2006 · 146
12. Misra · Acta Mater. · 2005 · 53 · 22110.1016/j.actamat.2004.09.018 ↗
13. Mara · Scri. Mater. · 2008 · 58 · 87410.1016/j.scriptamat.2008.01.005 ↗
14. Mara · Appl. Phys. Lett. · 2010 · 97 · 110.1063/1.3458000 ↗
15. Li · Acta Mater. · 2005 · 53 · 112110.1016/j.actamat.2004.11.009 ↗
16. Misra · Acta Mater. · 2004 · 52 · 238710.1016/j.actamat.2004.01.029 ↗
17. Akasheh · J. Appl. Phys. · 2007 · 10110.1063/1.2721093 ↗
18. Anderson · MRS Bull. · 1999 · 24 · 2710.1557/S0883769400051514 ↗
19. Nix · Mater. Sci. Eng. A · 1997 · 3710.1016/S0921-5093(97)00176-7 ↗
20. Embury · Acta Metall. Mater. · 1994 · 42 · 205110.1016/0956-7151(94)90030-2 ↗
21. Bhattacharyya · J. Mater. Res. · 2009 · 24 · 129110.1557/jmr.2009.0147 ↗
22. Uchic · Science · 2004 · 305 · 98610.1126/science.1098993 ↗
23. Greer · Prog. Mater. Sci. · 2011 · 56 · 65410.1016/j.pmatsci.2011.01.005 ↗
24. Steif · J. Appl. Metalwork. · 1987 · 4 · 31710.1007/BF02833942 ↗
25. Oliver · J. Mater. Res. · 1992 · 7 · 156410.1557/JMR.1992.1564 ↗