journal article·2007-07

Particulate-strengthened of Al–Si alloy/alumino-silicate composite

V.S. Aigbodion

Publisher page

Abstract

Abstract An Al–6Si% alloy reinforced with alumino-silicate particles were produced by powder metallurgy method, the weight fraction of alumino-silicate was varies from 10 to 30% in the alloy. Properties namely: linear shrinkage, porosity, density, hardness, impact energy, compressive strength and microstructure were analyzed. The results of the tests and analysis carried out revealed that, addition of alumino-silicate as reinforcement; increase hardness values and linear shrinkage, with a decreased in the impact energy and porosity as the weight fraction of alumino-silicate addition in the alloy increased. The compressive strength increased up to a maximum of 20 wt% addition of the reinforcement. However, the increased strength and hardness value is as a result of the distribution of the ceramic phase in the ductile metal matrix. Therefore, the additions of alumino-silicate to this alloy increased it properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Material Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Abubakre · Niger. J. Trop. Eng. · 2004 · l5 · 1
2. Asthana · 1988
3. E.I. Mbaya. The development of dispersion strengthened Tin-silica composite Used as a material for plain bearings, Unpublished M.Sc Thesis, Department of Mechanical Engineering, ATBU Bauchi, Nigeria, 2005, pp. 45–50.
4. Surappa · J. Mater. Sci. · 2003 · 16 · 98310.1007/BF00542743 ↗
5. 2001 · 26
6. Lloyd · Int. Mater. Rev · 1999 · 3 · 5
7. Maruyama · AMPTIAC Newslett. · 1988 · 23
8. A. Jokinen., V. Rauta., Manufacturing and properties of aluminium alloy matrix composites, final report. Espoo: Technical Research Centre of Finland, Metallurgy Laboratory, 1992, pp. 1–23.
9. E. Gregolin, H. Goldenstein, M. Gonçalves, R. Gomes dos Santos, Aluminium matrix composites reinforced with co-continuous interlaced phases aluminium–alumina needles. Universisade Estadual de Campainas, Faculdade de Engenharia Mecanica-DEMA Cidade Universitaria Zeferino Vaz, Barao Geraldo, 13083-970 Campinas-SP Brazil, (2002) 1–15.
10. S.B. Hassan. The study of the refractory properties of some Nigerian clay, Unpublished M.Sc. Thesis, Department of Mechanical Engineering, A.B.U. Zaria, Nigeria, 1990.
11. Rohatgi · 1989 · 51