journal article·2005-09

Characterization of rupture and fatigue resistance of TBC superalloy for combustion liners

A.K. Ray, D.K. Das, B. Venkataraman, P.K. Roy, B. Goswami, N. Roy, S.K. Das, N. Parida, S. Tarafder, S. Chaudhuri, S.K. Sahay, R.N. Ghosh

Materials Science and Engineering: A· Volume 405· Issue 1-2
Publisher page

Abstract

Abstract High-temperature, high-cycle fatigue and accelerated creep properties of thermal barrier coated (TBC) Superni C263 alloy used as a candidate material in combustor liners of aero engines are highlighted in this paper. An acoustic emission technique has been utilised to detect the ductile–brittle transition temperature of the bond coat. Results revealed that the ductile-to-brittle transition temperature (DBTT) of this bond coat is around 650 °C, which is in close proximity to the value reported for CoCrAlY type of bond coat. The endurance limit in fatigue and the life of TBC coated composite under accelerated creep conditions are substantially higher than those of the substrate material. Fractographic features at high stresses under fatigue was intergranular cleavage whereas those at low stresses were transgranular and ductile in nature. Delamination of the bond coat and spallation of the TBC at high stresses during fatigue was evident. It is recommended that these TBCs should not be put into use above 800 °C for more than 1000 h of continuous operation as the strength of the TBC superalloy drops to negligible levels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Ray · Int. J. Turbo Jet Engines · 2000 · 17 · 110.1515/TJJ.2000.17.1.1 ↗
2. Ray · J. Eur. Ceram. Soc. · 1999 · 19 · 209710.1016/S0955-2219(99)00028-X ↗
3. Brindley · Surf. Coat. Technol. · 1990 · 43–44 · 44610.1016/0257-8972(90)90096-U ↗
4. Liebert · Ind. Eng. Chem. Prod. Res. Dev. · 1984 · 12 · 334
5. Kokini · J. Therm. Spray. Tech. (JTTEE) ASM Int. · 1997 · 6 · 4310.1007/BF02646311 ↗
6. Lelait · Mater. Sci. Eng. A · 1989 · 121 · 47510.1016/0921-5093(89)90804-6 ↗
7. Kokini · Mater. Sci. Eng. A · 1994 · 189 · 30110.1016/0921-5093(94)90428-6 ↗
8. Godiwalla · Int. J. Turbo Jet Engines · 2001 · 18 · 7710.1515/TJJ.2001.18.2.77 ↗
9. Roy · High Temperature Mater. Process. · 2001 · 20 · 10310.1515/HTMP.2001.20.2.103 ↗
10. Chiu · Mater. Sci. Eng. A · 1991 · 132 · 3910.1016/0921-5093(91)90359-U ↗
11. Owen · 1980
12. Brandle · Surf. Coat. Technol. · 1996 · 41 · 87
13. Roy · Scr. Met. · 2004 · 7 · 73910.1016/j.scriptamat.2004.04.034 ↗
14. Ray · J. Met. Mater. Scr. · 2004 · 46 · 205
15. B. Gupta, et al., Aerospace Materials with General Metallurgy for Engineers, vol. II, New Delhi, India, 1996.