journal article·2015-09

Void coalescence and fracture behavior of notched and un-notched tensile tested specimens in fine grain dual phase steel

N. Saeidi, F. Ashrafizadeh, B. Niroumand, M.R. Forouzan, S. Mohseni mofidi, F. Barlat

Publisher page

Abstract

Abstract Due to growing global concern about the environmental issues, steel developers have been forced by automobile makers to produce more efficient steel grades with high strength to weight ratios along with high crashworthiness performance. In order to find deficiencies of the existing steels and develop superior steel products, detailed understanding of deformation and damage behavior in the existing steels is needed. In the present research, deformation and damage evolution during room temperature uniaxial tensile test of a modern high strength Dual Phase Steel, i.e. DP780, were studied. Detailed scanning electron microscopy (SEM) examination of the microstructures of notched and un-notched tensile fractured specimens revealed that in notched specimen, plastic deformation was concentrated more within the notched region. Therefore, much higher reduction in thickness with a high reduction gradient occurred in this region, In the un-notched specimen, however, plastic deformation was more uniformly distributed in larger parts of the gauge length, and therefore, thickness reduction happened with a lower gradient. Although geometric notch on the specimen did not change the void nucleation and growth mechanisms, the kinetics of these phenomena was influenced. On the other hand, voids linkage mechanism tended to change from void coalescence in the un-notched specimen to void sheeting in the notched specimen. Moreover, three different models developed by Brown & Embury (BM), Thomason and Pardoen were employed to predict the final fracture strain. It was revealed that, BM model showed much more accurate predictions for the studied DP steel in comparison with those of Thomason and Pardoens’ models.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Argon · Metall. Trans. A · 1975 · 6A · 82510.1007/BF02672306 ↗
2. Goods · Acta Metall. · 1979 · 27 · 110.1016/0001-6160(79)90051-8 ↗
3. Avramovic-Cingara · Metall. Trans. A · 2009 · 40 · 311710.1007/s11661-009-0030-z ↗
4. Li · Theor. Appl. Fract. Mech. · 1991 · 16 · 16110.1016/0167-8442(91)90033-G ↗
5. Floreen · Scr. Metall. · 1970 · 4 · 8710.1016/0036-9748(70)90170-5 ↗
6. Landron · Acta Mater. · 2011 · 59 · 756410.1016/j.actamat.2011.08.046 ↗
7. Lecarme · Int. J. Plast. · 2011 · 27 · 120310.1016/j.ijplas.2011.01.004 ↗
8. Gurson · J. Eng. Mater. Technol. · 1977 · 99 · 210.1115/1.3443401 ↗
9. Benzerga · J. Mech. Phys. Solids. · 2002 · 50 · 133110.1016/S0022-5096(01)00125-9 ↗
10. Marini · Eng. Fract. Mech. · 1985 · 22 · 98910.1016/0013-7944(85)90038-4 ↗
11. Pardoen · J. Mech. Phys. Solids · 2000 · 48 · 246710.1016/S0022-5096(00)00019-3 ↗
12. Thomason · J. Inst. Met. · 1968 · 96 · 360
13. Thompson · Metall. Trans. A · 1987 · 18A · 187710.1007/BF02647017 ↗
14. Young · Metall. Mater. Trans. A · 2002 · 33A · 329310.1007/s11661-002-0316-x ↗
15. Ran · Int. J. Plast. · 2013 · 41 · 6510.1016/j.ijplas.2012.09.002 ↗
16. Lian · Comput. Mater. Sci. · 2014 · 94 · 24510.1016/j.commatsci.2014.05.051 ↗
17. Requena · Mater. Sci. Eng. A. · 2014 · 589 · 24210.1016/j.msea.2013.09.084 ↗
18. Hancock · J. Mech. Phys. Solids · 1976 · 24 · 14710.1016/0022-5096(76)90024-7 ↗
19. Rice · J. Mech. Phys. Solids · 1969 · 17 · 20110.1016/0022-5096(69)90033-7 ↗
20. Pardoen · Comput. Struct. · 2006 · 84 · 164110.1016/j.compstruc.2006.05.001 ↗
21. Liao · Mech. Mater. · 1997 · 26 · 21310.1016/S0167-6636(97)00033-1 ↗
22. Benzerga · Eur. J. Mech. · 2001 · 20 · 39710.1016/S0997-7538(01)01147-0 ↗
23. Benzerga · Acta Mater. · 2004 · 52 · 462310.1016/j.actamat.2004.06.020 ↗
24. Kang · Scr. Mater. · 2007 · 56 · 99910.1016/j.scriptamat.2007.01.031 ↗
25. Bareggi · Int. J. Fract. · 2012 · 174 · 21710.1007/s10704-012-9692-4 ↗
26. Landron · Scr. Mater. · 2010 · 63 · 97310.1016/j.scriptamat.2010.07.021 ↗
27. Erdogan · Mater. Des. · 2002 · 23 · 59710.1016/S0261-3069(02)00065-1 ↗
28. Barlat · J. Mater. Sci. · 1985 · 20 · 338510.1007/BF00545208 ↗
29. Bandstra · Acta Mater. · 2008 · 56 · 442910.1016/j.actamat.2008.05.009 ↗
30. Weck · Adv. Eng. Mater. · 2006 · 8 · 46810.1002/adem.200600034 ↗
31. Tekoglu · J. Mech. Phys. Solids · 2012 · 60 · 136310.1016/j.jmps.2012.02.006 ↗
32. Weck · Acta Mater. · 2008 · 56 · 291910.1016/j.actamat.2008.02.027 ↗
33. Hosokawa. · Acta Mater. · 2013 · 61 · 102110.1016/j.actamat.2012.08.002 ↗
34. Thomason · 1990
35. Annual Book of ASTM Standards, E8, 2001.
36. Biophotonics
37. Poruks · Scr. Mater. · 2006 · 54 · 4110.1016/j.scriptamat.2005.09.012 ↗
38. Martin · Acta Mater. · 2012 · 60 · 464610.1016/j.actamat.2012.03.040 ↗
39. Wang · Exp. Tech. · 2010 · 34 · 5410.1111/j.1747-1567.2009.00483.x ↗
40. Zhang · Opt. Laser. Eng. · 2011 · 49 · 20010.1016/j.optlaseng.2010.09.015 ↗
41. Dai yan · Exp. Mech. · 2012 · 52 · 135510.1007/s11340-012-9591-7 ↗
42. Steinbrunner · Metall. Trans. · 1988 · 19 · 57910.1007/BF02649272 ↗
43. Eman · Int. J. Solids Struct. · 2009 · 46 · 275010.1016/j.ijsolstr.2009.03.003 ↗
44. Dieter · 1988 · 314
45. Kosco · Metall. Trans. A · 1993 · 24A · 68110.1007/BF02656636 ↗
46. LeRoy · Acta Metall. · 1981 · 29 · 150910.1016/0001-6160(81)90185-1 ↗
47. L.M. Brown, J.D. Embury. Proceedings of the third international conference on the strength of metals and alloys, ICSMA 3, Institute of Metals, Cambridge, UK,1973, pp. 164–169.
48. Kadkhodapour · Acta Mater. · 2011 · 59 · 438710.1016/j.actamat.2011.03.062 ↗