journal article·2004-08

Microstructure and property of micro-plasma-sprayed Cu coating

Chang-Jiu Li, Bo Sun

Materials Science and Engineering: A· Volume 379· Issue 1-2
Publisher page

Abstract

Abstract Cu coating is deposited by a micro-plasma spraying system under a low power of 2.8–4.2 kW. The effects of the main processing parameters including plasma arc power, operating gas flow and spray distance on the particle velocity during spraying, and the microstructure and microhardness and the oxygen content in the coating are investigated. The microstructure of the coating are examined using optical and scanning electron microscopy (SEM). The property of the coating is characterized by cross-sectional microhardness. The particle velocity during in-flight is measured using a particle velocity/temperature measurement system based on thermal radiation. The dependency of the microstructure and property of the coating on spray particle conditions is examined through comparing the particle velocity, microstructure, and microhardness of the coating deposited by the micro-plasma spray with that by the conventional plasma spray at a power one order higher. It has been found that a dense copper coating comparable to the conventional plasma-sprayed one can be produced by the micro-plasma spray under a power one order lower. The present results confirm that the coating of comparable microstructure and property can be produced regardless of the plasma power level provided that the comparable particle velocity and molten state are achieved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Karthikeyan · Mater. Sci. Eng. · 1997 · A238 · 27510.1016/S0921-5093(96)10568-2 ↗
2. Dickey · Vacuum · 2000 · 59 · 17910.1016/S0042-207X(00)00268-2 ↗
3. Khor · Mater. Lett. · 1999 · 38 · 43710.1016/S0167-577X(98)00203-1 ↗
4. Montanari · Mater. Lett. · 2002 · 52 · 10010.1016/S0167-577X(01)00375-5 ↗
5. Tamulevicius · J. Power Sources · 1998 · 72 · 910.1016/S0378-7753(97)02808-5 ↗
6. Gell · Surf. Coat. Technol. · 2001 · 146–147 · 4810.1016/S0257-8972(01)01470-0 ↗
7. Guipont · Mater. Sci. Eng. · 2002 · A325 · 910.1016/S0921-5093(01)01414-9 ↗
8. T. Morishita, in: S. Blum-Sandmeier, H. Eschnauer, P. Huber, A.R Nicoll (Eds.), Proceedings of the Second Plasma-Technik-Symposium, Hafliger Druck AG, Wettingen, 1991, p. 137.
9. Janisson · J. Therm. Spray Technol. · 1999 · 8 · 54510.1361/105996399770350232 ↗
10. J.M. Houben, in: General Aspects of Thermal Spraying, Preprints of the 9th International Spraying Conference, Nederlands Instituut Voor Lastechniek, Hague, 1980, p. 143.
11. Li · J. Therm. Spray Technol. · 2002 · 11 · 36510.1361/105996302770348754 ↗
12. Ohmori · Trans. Jpn. Weld. Res. Inst. · 1990 · 19 · 259
13. Prystay · J. Therm. Spray Technol. · 2001 · 10 · 6710.1361/105996301770349529 ↗
14. Li · Surf. Coat. Technol. · 1996 · 82 · 25410.1016/0257-8972(95)02670-3 ↗
15. L. Pejrdy, J. Wigren, P. Gougeon, C. Moreau, in: C. Coddet (Ed.), Thermal Spray: Meeting the Challenges of the 21st Century, ASM International, Materials Park, OH, 1998, p. 785.
16. Vardelle · J. AIChE. · 1983 · 29 · 23610.1002/aic.690290210 ↗
17. M.P. Planche, O. Betoule, J.F. Coudert, A. Grimaud, M. Vardelle, P. Fauchais, in: C.C. Berndt, T.F. Bernecki (Eds.), Thermal Spray Coatings: Research, Design and Applications, ASM International, Materials Park, OH, 1993, p. 81.
18. Westergard · Tribol. Int. · 1998 · 31 · 27110.1016/S0301-679X(98)00033-4 ↗
19. K. Yushchenko, Y. Borisov, Y. Pereverzev, V. Balakin, R. Smith, in: A. Ohmori (Ed.), Thermal Spraying: Current Status and Future Trends, High Temperature Society of Japan, Kobe, 1995, p. 273.
20. Sun · Mater. Protect. · 2001 · 34 · 30
21. Li · J. Therm. Spray Technol. · 2003 · 12 · 8010.1361/105996303770348537 ↗
22. A. Kubo, S. Nagakura, A. Inoguchi, H. Ezawa (Eds.), Handbook of Physical Chemistry, fourth ed., Iwanami Honya Co. Ltd., Tokyo, 1987, p. 550 (in Japanese).
23. Jones · Rep. Prog. Phys. · 1973 · 36 · 142510.1088/0034-4885/36/11/002 ↗
24. Moreau · Meas. Sci. Technol. · 1990 · 1 · 80710.1088/0957-0233/1/8/023 ↗
25. Jones · J. Mater. Sci. · 1984 · 19 · 104310.1007/BF01120015 ↗
26. Y.Z. Li, Rapid Solidification Technology and Material, Defense Industry Publishing, Beijing, 1993, p. 375 (in Chinese).
27. Ruhl · Mater. Sci. Eng. · 1967 · 1 · 31310.1016/0025-5416(67)90013-4 ↗
28. Fauchais · Metall. Trans. · 1989 · 20B · 26310.1007/BF02825607 ↗
29. Y. Arata, A. Ohmori, C.-J. Li, in: D.L. Houck (Ed.), Thermal Spray: Advance in Coating Technology, ASM International, Materials Park, OH, 1988, p. 79.
30. C.-J. Li, J.-L. Li, Aeronaut. Manufact. Technol. (5) (1999) 57 (in Chinese).
31. Li · Surf. Coat. Technol. · 2003 · 162 · 2110.1016/S0257-8972(02)00573-X ↗
32. J.R. Fincke, R. Rodriquez, C.G. Pentecost, in: T.F. Bernecki (Ed.), Thermal Spray Research and Applications, ASM International, Materials Park, OH, 1990, p. 45.