journal article·2008-11Open access

On the influence of particle distribution and reverse loading on damage mechanisms of ductile steels

P.O. Bouchard, L. Bourgeon, H. Lachapèle, E. Maire, C. Verdu, R. Forestier, R.E. Logé

Materials Science and Engineering: A· Volume 496· Issue 1-2

Abstract

During cold forming processes materials are subjected to non-monotonic complex multiaxial loadings. To obtain complex shapes at low temperature requires the use of particularly ductile materials. The damage behaviour of two ductile steels is studied here at different scales. At the macro-scale, tensile tests are performed in different directions with respect to the grain flow orientation in order to highlight the anisotropy of the behaviour. Tensile tests after pre-compression stages are performed to study the influence of pre-compression on damage evolution. For these two steel grades it is observed that pre-compression tends to increase ductility. At the micro-scale, in situ tensile tests are performed in a scanning electron microscope (SEM) as well as in an X-ray tomography device (synchrotron–ESRF). These techniques are particularly well suited to observe and understand the stages of nucleation, growth and coalescence of voids in the vicinity of inclusions. The influence of inclusion shape and orientation on damage anisotropy and pre-compression behaviour is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Void growth and collapse in viscous solids
2. Thomason · 1990
3. Lassance · Eng. Fract. Mech. · 2006 · 73 · 100910.1016/j.engfracmech.2005.12.004 ↗
4. Faleskog · J. Mech. Phys. Solids · 1997 · 45 · 2110.1016/S0022-5096(96)00078-6 ↗
5. Shabrov · Modelling Simul. Mater. Sci. Eng. · 2002 · 10 · 16310.1088/0965-0393/10/2/305 ↗
6. Iorio · Scripta Mater. · 2002 · 46 · 86310.1016/S1359-6462(02)00067-2 ↗
7. Benzerga · Mod. Simul. Mater. Sci. Eng. · 2002 · 10 · 7310.1088/0965-0393/10/1/306 ↗
8. Benzerga · Acta Mater. · 2004 · 52 · 462310.1016/j.actamat.2004.06.020 ↗
9. Bao · Mater. Sci. Eng. · 2004 · 384 · 38510.1016/S0921-5093(04)00883-4 ↗
10. Bao · Int. J. Mech. Sci. · 2004 · 46 · 8110.1016/j.ijmecsci.2004.02.006 ↗
11. Xue · Int. J. Solids Struct. · 2006 · 43 · 627710.1016/j.ijsolstr.2005.08.008 ↗
12. Gao · Int. J. Solids Struct. · 2006 · 43 · 627710.1016/j.ijsolstr.2005.08.008 ↗
13. Kim · Eng. Frac. Mech. · 2004 · 71 · 37910.1016/S0013-7944(03)00114-0 ↗
14. Kim · Int. J. Solids Struct. · 2007 · 44 · 184410.1016/j.ijsolstr.2006.08.028 ↗
15. Maire · Adv. Eng. Mater. · 2001 · 3 · 53910.1002/1527-2648(200108)3:8<539::AID-ADEM539>3.0.CO;2-6 ↗
16. Salvo · Nucl. Instrum. Methods Phys. Res. · 2003 · 200 · 27310.1016/S0168-583X(02)01689-0 ↗
17. Buffière · Acta Mater. · 1999 · 47 · 161310.1016/S1359-6454(99)00024-5 ↗
18. Babout · Acta Mater. · 2004 · 52 · 247510.1016/j.actamat.2004.02.001 ↗
19. Maire · J. Mech. Phys. Solids · 2005 · 53 · 241110.1016/j.jmps.2005.06.005 ↗
20. Everett · Scripta Mater. · 2001 · 44 · 16510.1016/S1359-6462(00)00561-3 ↗
21. DiMichiel · Rev. Sci. Instrum. · 2005 · 76 · 04370210.1063/1.1884194 ↗
22. Pyzalla · Science · 2005 · 308 · 9210.1126/science.1106778 ↗