journal article·2007-06

Fluxless silicon-to-alumina bonding using electroplated Au–Sn–Au structure at eutectic composition

Jong S. Kim, Won S. Choi, Dongwook Kim, Andrei Shkel, Chin C. Lee

Materials Science and Engineering: A· Volume 458· Issue 1-2
Publisher page

Abstract

Abstract Large 6 mm × 9 mm silicon chips have been successfully bonded to alumina substrates with electroplated Au/Sn/Au structure at the eutectic composition. The new bonding process is entirely fluxless, or flux-free. It is performed in vacuum (50 milliTorrs), where the oxygen content is reduced by a factor of 15,200 comparing to air, to inhibit solder oxidation. Eutectic Au80Sn20 alloy is a well established solder that exhibits excellent fatigue-resistance, creep-resistance, and long-term reliability. Despite the popularity of plastic packages and organic substrates, alumina remains an important packaging material for highly reliable products in demanding environment. A major challenge in silicon-to-alumina bonding is the large thermal expansion mismatch between silicon (2.7 ppm/°C) and alumina (7 ppm/°C). The new process developed shows that a large silicon chip can be bonded to an alumina substrate without chip cracking or solder fracture. In this research, we learned the specific bonding procedures necessary to turn the Au/Sn/Au structure into homogeneous eutectic alloy without the chip breaking away from the solder layer. Nearly void-free joints are produced as confirmed by a scanning acoustic microscope (SAM). The joints are studied using scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDX) to evaluate the microstructure and the composition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Synthesis and properties of polymers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Tummala · 1997
2. Gooch · J. Vac. Sci. Technol. A · 1999 · 17 · 229510.1116/1.581763 ↗
3. Low · J. Electron. Packaging · 2003 · 125 · 32510.1115/1.1535933 ↗
4. Barrett · IEEE Trans. Components Hybrids Manuf. Technol. · 1992 · 15 · 109310.1109/33.206936 ↗
5. Olsen · IEEE Trans. Components Hybrids Manuf. Technol. · 1979 · CHMT-2 · 25710.1109/TCHMT.1979.1135450 ↗
6. 1994
7. Jones · 1995 · 450
8. Burmeister · Adv. Packaging · 1998 · 32
9. Weib · IEEE Trans. Components Packaging Manuf. Technol. · 1996 · 19 · 4610.1109/95.486562 ↗
10. Yost · Metall. Trans. A · 1990 · 21 · 188510.1007/BF02647236 ↗
11. Matijasevic · IEEE Trans. Components Hybrids Manuf. Technol. · 1990 · 13 · 112810.1109/33.62563 ↗
12. Lee · IEEE Trans. Components Hybrids Manuf. Technol. · 1991 · 14 · 40710.1109/33.87322 ↗
13. Zhang · IEEE Trans. Components Packaging Tech. · 2003 · 26 · 23310.1109/TCAPT.2002.807590 ↗
14. Okamoto · 1987
15. Matijasevic · Thin Solid Films · 1993 · 223 · 27610.1016/0040-6090(93)90533-U ↗