journal article·2007-03

Magnetic pulsed compaction of ferromagnetic nano-powders for soft-magnetic core

S.J. Hong, G.H. Lee, C.K. Rhee, W.W. Kim, K.S. Lee

Publisher page

Abstract

Abstract Densification of nanocrystalline Fe–6.5 wt.% Si powder with 20–40 μm particle size by uniaxial compaction and magnetic pulsed compaction was investigated in the temperature range of 23–400 °C and applied pressure range of 0.3–2.0 GPa. The microstructure of mechanically milled powder for 36 h showed a distribution of α-Fe phase 13–30 nm in size embedded in the matrix. The maximum relative density of Fe–6.5 wt.% Si green compact (core) was achieved more than 82%, by magnetic pulsed compaction (MPC) at room temperature under 2.0 GPa using annealed coarse powder (milled for 4 h), while it was less than 62% by a uniaxial static compaction. Finally, a remarkable effect of the compaction using the MPC process on the final density of Fe–Si alloy was measured in this research. The magnetic permeability of Fe–6.5 wt.% Si and Fe–6 wt.% Al–9 wt.% Si core is increased with the relative density increased.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Microstructure and mechanical properties · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (6)

Show source-provided references
1. Kim · Met. Mater. Int. · 2004 · 10 · 55910.1007/BF03027419 ↗
2. Honma · J. Appl. Phys. · 1991 · 70 · 625910.1063/1.349985 ↗
3. Yamaguchi · IEEE Trans. Magn. · 1977 · 13 · 162110.1109/TMAG.1977.1059651 ↗
4. Arai · J. Appl. Phys. · 1985 · 57 · 46010.1063/1.334773 ↗
5. Li · Nanostruct. Mater. · 1993 · 3 · 40710.1016/0965-9773(93)90106-L ↗
6. Gupta · J. Mater. Sci. Eng. A · 2001 · 304–306 · 39410.1016/S0921-5093(00)01515-X ↗