Investigation on the microstructure and mechanical properties of the spray-formed Cu–Cr alloys
Source abstract
Abstract
Abstract Cu–1.2 wt.%Cr and Cu–3.2 wt.%Cr alloys were prepared by spray forming. The as-deposited alloys were subsequently warm rolled at 300 °C with a 40% reduction and then two types of thermo-mechanical treatments were adopted to enhance the mechanical properties of the Cu–Cr alloys. The microstructural features of the Cu–Cr alloys in different thermo-mechanical processing conditions were characterized using optical, scanning electron and transmission electron microscopy techniques. The results show that the spray-formed Cu–Cr alloys exhibit a better response to heat treatment compared to the conventional casting alloys. The chromium content has a great effect on the aging behaviors of the Cu–Cr alloys. Although a higher chromium content leads to a larger volume fraction of chromium precipitates generated during the solidification, it does not cause an increase in the mechanical properties. The chromium content should be lower than 1.2 wt.%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Liu · Trans. Nonferrous Met. Soc. China · 1999 · 9 · 723
2. Sakamoto · Funct. Mater. · 1993 · 24 · 100
3. Tenwick · Mater. Sci. Technol. · 1988 · 98 · 543
4. Larberg · Mater. Sci. Eng. · 1986 · 83A · 115
5. Liu · J. Mater. Sci. · 2000 · 35 · 169110.1023/A:1004760014886 ↗
6. Batawi · Mater. Sci. Eng. · 1990 · 6A · 892
7. Morris · Mater. Sci. Eng. · 1994 · 188A · 25510.1016/0921-5093(94)90380-8 ↗
8. Batawi · Scr. Metall. · 1993 · 29 · 76510.1016/0956-716X(93)90223-F ↗
9. Zhang · Mater. Sci. Forum · 2005 · 475–479 · 285310.4028/www.scientific.net/MSF.475-479.2853 ↗
10. Liu · Mater. Sci. Eng. · 2004 · 372A · 22910.1016/j.msea.2003.12.041 ↗
11. Spitzig · Acta Metall. · 1987 · 35 · 242710.1016/0001-6160(87)90140-4 ↗
12. Biselli · Acta Metall. Mater. · 1994 · 42 · 16310.1016/0956-7151(94)90059-0 ↗
13. Markandeya · Mater. Sci. Eng. · 2005 · 404A · 30510.1016/j.msea.2005.05.072 ↗
14. Rohatgi · Acta Mater. · 2001 · 49 · 42710.1016/S1359-6454(00)00335-9 ↗
15. Morris · Mater. Sci. Eng. · 1988 · 104A · 20110.1016/0025-5416(88)90422-3 ↗
16. Mclntype · J. Phys. · 1966 · 27 · 178
17. Correia · Acta Mater. · 1997 · 45 · 17710.1016/S1359-6454(96)00142-5 ↗
18. Ardell · Metall. Trans. · 1985 · 16A · 213110.1007/BF02670416 ↗
19. Hansen · Metall. Trans. · 1985 · 16A · 216710.1007/BF02670417 ↗
20. Gerold · Z. Metallkd. · 1980 · 71 · 286
21. Morris · Acta Metall. · 1987 · 35 · 251110.1016/0001-6160(87)90148-9 ↗
22. Amin · J. Mater. Sci. · 1975 · 10 · 151910.1007/BF01031852 ↗
23. Ashby · 1968 · 143
24. Liu · Mater. Sci. Eng. · 1999 · 265A · 26210.1016/S0921-5093(98)01149-6 ↗
25. Singh · Mater. Sci. Eng. · 1991 · 145A · 24310.1016/0921-5093(91)90254-K ↗
26. Nes · Acta Metall. · 1983 · 33 · 1110.1016/0001-6160(85)90214-7 ↗