Relaxation of the residual stress in 6061Al-15 vol.% SiCw composites by isothermal annealing
Source abstract
Abstract
The residual stress (RS) in extruded 6061Al-15 vol.% SiCw composites manufactured by a powder metallurgical route has been studied by neutron diffraction. Several precipitation states were investigated, going from a fully hardened state, T6, to an over-aged (OA) condition. For comparison, the unreinforced powder metallurgy 6061Al alloy was also studied. The end precipitation stages T6 and OA were obtained after appropriate heat treatments. The T6 condition involves a quenching step, which provokes a macro-RS state. Instead, the OA treatment (at 300 ◦C) does create relaxation at intermediate times and leads to total relaxation of the axial deviatoric component and to partial relaxation of the hydrostatic term of the stress in the composite. Total relaxation of both deviatoric and hydrostatic terms occurs in the unreinforced alloy. Furthermore, it is found that relaxation of the macro-RS occurs more rapidly in the unreinforced alloy than in the composite. These results are in agreement with the idea that discontinuously reinforced metal matrix composites (DRMMCs) have a more stable microstructure than the corresponding unreinforced alloys. On the other hand, no decrease of the deviatoric micro-RS developed in the composite and a small reduction of the hydrostatic one occurs when treating from the T6 to the OA condition. This implies that the geometry of the reinforcing particles plays an important role and the geometrically necessary dislocations do not disappear with heat treatment
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. R. Fernandez, G. Bruno, G. Gonzalez-Doncel, Acta Mater. (2004), submitted for publication.
2. Prangnell · Mat. Sci. Eng. · 1992 · A159 · 5110.1016/0921-5093(92)90398-K ↗
3. L. Pintschovius, in: M.T. Hutchings, AD. Krawitz (Eds.), Proceedings of the NATO Advanced Research Workshop on Measurement of Residual and Applied Stress Using Neutron Diffraction, Kluwer Academic Publishers, Dordrecht, 1992, pp. 115–130.10.1007/978-94-011-2797-4_7 ↗
4. Fitzpatrick · Acta Mater. · 1997 · 45 · 486710.1016/S1359-6454(97)00209-7 ↗
5. Fitzpatrick · Acta Mater. · 2002 · 50 · 103110.1016/S1359-6454(01)00401-3 ↗
6. Myüller · Z. Metallkd. · 2001 · 92 · 253
7. Xevy-Tubiana · Mater. Sci. Eng. A · 2003 · 341 · 7410.1016/S0921-5093(02)00204-6 ↗
8. Fernandez · Mat. Sci. Forum · 2003 · 426–432 · 219310.4028/www.scientific.net/MSF.426-432.2193 ↗
9. Maeda · Scripta Mater. · 1997 · 36 · 33510.1016/S1359-6462(96)00372-7 ↗
10. Robinson · Mater. Sci. Technol. · 2003 · 19 · 51210.1179/026708303225001939 ↗
11. Borrego · Comp. Sci. Technol. · 2002 · 62 · 73110.1016/S0266-3538(02)00043-X ↗
12. Borrego · Scripta Mater. · 1996 · 34 · 47110.1016/0956-716X(95)00542-4 ↗
13. Borrego · Mater. Sci. Eng. · 1998 · A245 · 1010.1016/S0921-5093(97)00706-5 ↗
14. V. Hauk, E. Macherauch, in: V. Hauk, E. Macherauch (Eds.), HTM Beiheft Eigenspannungen und Lastspannungen, Carl-Hanser-Verlag, Munich, 1982, pp. 5–23.
15. Fernandez · Appl. Phys. A · 2002 · 74 · S114610.1007/s003390101207 ↗
16. Dölle · J. Appl. Cryst. · 1979 · 12 · 48910.1107/S0021889879013169 ↗
17. A. Ralston, Ph. Rabinowitz, A First Course in Numerical Analysis, McGraw-Hill, New York, 1978.
18. W.F. Hosford, The Mechanics of Crystals and Textured Polycrystals, Oxford University Press, Oxford, UK, 1993.
19. V. Hauk, Structural and Residual Stress Analysis by Non-destructive Methods, Elsevier, Amsterdam, 1997, 436-ff.10.1016/B978-044482476-9/50000-1 ↗
20. R. Fernandez, Ph.D. Thesis, Complutense University Madrid, 2003.
21. Olsen · Trans. ASM · 1969 · 62 · 711
22. Dutta · Mater. Sci. Eng. · 1989 · A112 · 6710.1016/0921-5093(89)90345-6 ↗
23. Arsenault · Mater. Sci. Eng. · 1987 · 96 · 7710.1016/0025-5416(87)90542-8 ↗
24. Sayman · Comp. Sci. · 2001 · Tech.61 · 212910.1016/S0266-3538(01)00163-4 ↗
25. R.A. Winholtz, in: M.T. Hutchings, AD. Krawitz (Eds.), Proceedings of the NATO Advanced Research Workshop on Measurement of Residual and Applied Stress Using Neutron Diffraction, Kluwer Academic Publishers, Dordrecht, 1992, pp. 131–146.10.1007/978-94-011-2797-4_8 ↗
26. Borrego · J. Mater. Sci. · 2003 · 38 · 276110.1023/A:1024467509809 ↗
27. T.E. Strangman, in: S.D. Antolovich, R.W. Stusrud, R.A. McKay, D.L. Anton, T. Khan, R.D. Kissinger, D.L. Klarstrom (Eds.), Superalloys 1992, The Minerals, Metals and Materials Society, Warrendale, PS, USA, 1992.
28. Fitzpatrick · Acta Mater. · 1999 · 47 · 58510.1016/S1359-6454(98)00355-3 ↗
29. González-Doncel · Acta Metall. Mater. · 1993 · 41 · 279710.1016/0956-7151(93)90094-9 ↗
30. Park · Metall. Mater. Trans. · 1995 · 26A · 311910.1007/BF02669441 ↗
31. Li · Acta Mater. · 1999 · 47 · 339510.1016/S1359-6454(99)00219-0 ↗
32. A. Borrego, PhD Thesis, Complutense University, Madrid, 2004.
33. Wu · Metall. Trans. · 1987 · 18A · 45110.1007/BF02648806 ↗
34. Withers · Acta Metall. · 1989 · 37 · 306110.1016/0001-6160(89)90341-6 ↗
35. R. Fernandez, G. Bruno, G. González-Doncel, Mater. Sci. Eng. (2004), submitted for publication.