Residual stresses in cold-coiled helical compression springs for automotive suspensions measured by neutron diffraction
Source abstract
Abstract
Abstract Residual stresses in cold-coiled helical compression springs for automotive suspensions were determined at several manufacturing stages using neutron diffraction. These results indicate that the residual stresses in the as-coiled springs are nearly uniaxial with peak values of ±900 MPa and independent of coil position. A factory stress-relieved spring showed the same pattern of stresses, but with the peak values reduced to ∼±200 MPa. Residual stresses in a spring annealed in a laboratory furnace at 56 K over the normal factory annealing temperature were ∼35% lower. The effect of cutting the springs either by electric discharge machining (EDM) or by abusive grinding was also examined. From these data, the smallest spring segment that can yield reliable stress data was determined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Engineering and Vibrations Research · Soil, Finite Element Methods · Scientific Research and Discoveries
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Steel Springs, Metals Handbook, tenth ed., vol. 1, ASM International, Materials Park, OH, 1990.
2. Manual on Design and Application of Helical and Spiral Springs, SAE HS-795, SAE International, Warrendale, PA, 1997.
3. ASM Handbook, Metal Progr., 1955, p. 81.
4. A.M. Wahl, Mechanical Springs, McGraw-Hill, New York, 1963.
5. Allen · Adv. Phys. · 1985 · 34 · 44510.1080/00018738500101791 ↗
6. I.C. Noyan, J.B. Cohen, Residual Stress—Measurement by Diffraction and Interpretation, Springer-Verlag, New York, NY, 1987.10.1007/978-1-4613-9570-6 ↗
7. Prask · Mater. Sci. Forum · 1996 · 210–213 · 15510.4028/www.scientific.net/MSF.210-213.155 ↗
8. Brand · J. Appl. Cryst. · 1994 · 27 · 16410.1107/S0021889893007605 ↗
9. ASTM E8-01: Standard Test Methods for Tension Testing of Metallic Materials, ASTM Book of Standards, vol. 03.01, ASTM International, West Conshohocken, PA, USA, 2001.
10. G.E. Dieter, Mechanical Metallurgy, McGraw-Hill, New York, NY, 1986.
11. J.M. Gere, S.P. Timoshenko, Mechanics of Materials PWS-Kent, Boston, MA, 1990.10.1007/978-1-4899-3124-5 ↗
12. Webster · J. Neutron Res. · 1996 · 3 · 22310.1080/10238169608200197 ↗